All MIBs › LLDP-MIB › lldpLocSysName
lldpLocSysName
Module: LLDP-MIB
OID (symbolic): LLDP-MIB::lldpLocSysName
OID (numeric): 1.0.8802.1.1.2.1.3.3
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-only
Description: The string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same value of sysName object.
What is lldpLocSysName?
The system name this device advertises to LLDP neighbors, matching sysName if RFC 3418 is supported. Admins see this as the human-readable hostname their neighbor's LLDP neighbor table will show for this device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.0.8802.1.1.2.1.3.3 snmpwalk -v2c -c public <target> LLDP-MIB::lldpLocSysName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.0.8802.1.1.2.1.3.3.1 snmpget -v2c -c public <target> LLDP-MIB::lldpLocSysName.1
Start monitoring Vendor-neutral IEEE 802.1AB standard (managed Ethernet switch/router/AP/IP phone) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-MIB::lldpLocSysName OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1AB standard (managed Ethernet switch/router/AP/IP phone) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.0 | std | START-MIB |
| 1.0.8802 | iso8802 | START-MIB |
| 1.0.8802.1 | ieee802dot1 | START-MIB |
| 1.0.8802.1.1 | ieee802dot1mibs | START-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.0.8802.1.1.2 | lldpMIB | LLDP-MIB |
| 1.0.8802.1.1.2.1 | lldpObjects | LLDP-MIB |
| 1.0.8802.1.1.2.1.3 | lldpLocalSystemData | LLDP-MIB |
| 1.0.8802.1.1.2.1.3.3 | lldpLocSysName | LLDP-MIB |