All MIBs › LLDP-MIB › lldpLocSysCapSupported
lldpLocSysCapSupported
Module: LLDP-MIB
OID (symbolic): LLDP-MIB::lldpLocSysCapSupported
OID (numeric): 1.0.8802.1.1.2.1.3.5
Node type: OBJECT-TYPE
Type: LldpSystemCapabilitiesMap
Access: read-only
Description: The bitmap value used to identify which system capabilities are supported on the local system.
What is lldpLocSysCapSupported?
This bitmap identifies which system capabilities the local device supports as announced via Link Layer Discovery Protocol (LLDP), such as repeater, bridge, or WLAN functionality. Operators review this to verify that the device properly advertises its capabilities to neighboring switches and devices.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.0.8802.1.1.2.1.3.5 snmpwalk -v2c -c public <target> LLDP-MIB::lldpLocSysCapSupported
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.0.8802.1.1.2.1.3.5.1 snmpget -v2c -c public <target> LLDP-MIB::lldpLocSysCapSupported.1
Start monitoring Vendor-neutral IEEE 802.1AB standard (managed Ethernet switch/router/AP/IP phone) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-MIB::lldpLocSysCapSupported OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1AB standard (managed Ethernet switch/router/AP/IP phone) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.0 | std | START-MIB |
| 1.0.8802 | iso8802 | START-MIB |
| 1.0.8802.1 | ieee802dot1 | START-MIB |
| 1.0.8802.1.1 | ieee802dot1mibs | START-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.0.8802.1.1.2 | lldpMIB | LLDP-MIB |
| 1.0.8802.1.1.2.1 | lldpObjects | LLDP-MIB |
| 1.0.8802.1.1.2.1.3 | lldpLocalSystemData | LLDP-MIB |
| 1.0.8802.1.1.2.1.3.5 | lldpLocSysCapSupported | LLDP-MIB |