All MIBs › LLDP-MIB › lldpLocSysCapEnabled
lldpLocSysCapEnabled
Module: LLDP-MIB
OID (symbolic): LLDP-MIB::lldpLocSysCapEnabled
OID (numeric): 1.0.8802.1.1.2.1.3.6
Node type: OBJECT-TYPE
Type: LldpSystemCapabilitiesMap
Access: read-only
Description: The bitmap value used to identify which system capabilities are enabled on the local system.
What is lldpLocSysCapEnabled?
A bitmap indicating which system capabilities (such as bridge, router, or repeater) are actually enabled on this local device, out of those it supports. Admins use it, alongside the supported-capabilities bitmap, to confirm which advertised roles this device is currently performing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.0.8802.1.1.2.1.3.6 snmpwalk -v2c -c public <target> LLDP-MIB::lldpLocSysCapEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.0.8802.1.1.2.1.3.6.1 snmpget -v2c -c public <target> LLDP-MIB::lldpLocSysCapEnabled.1
Start monitoring Vendor-neutral IEEE 802.1AB standard (managed Ethernet switch/router/AP/IP phone) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-MIB::lldpLocSysCapEnabled OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1AB standard (managed Ethernet switch/router/AP/IP phone) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.0 | std | START-MIB |
| 1.0.8802 | iso8802 | START-MIB |
| 1.0.8802.1 | ieee802dot1 | START-MIB |
| 1.0.8802.1.1 | ieee802dot1mibs | START-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.0.8802.1.1.2 | lldpMIB | LLDP-MIB |
| 1.0.8802.1.1.2.1 | lldpObjects | LLDP-MIB |
| 1.0.8802.1.1.2.1.3 | lldpLocalSystemData | LLDP-MIB |
| 1.0.8802.1.1.2.1.3.6 | lldpLocSysCapEnabled | LLDP-MIB |