LLDP-EXT-DOT3-V2-MIB :: lldpV2Xdot3RemPortOperMauType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › LLDP-EXT-DOT3-V2-MIB › lldpV2Xdot3RemPortOperMauType

lldpV2Xdot3RemPortOperMauType

Module: LLDP-EXT-DOT3-V2-MIB

OID (symbolic): LLDP-EXT-DOT3-V2-MIB::lldpV2Xdot3RemPortOperMauType

OID (numeric): 1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: An integer value that indicates the operational MAU type of the sending device.

This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in IETF RFC 4836 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID.

For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in RFC 4836 (or subsequent revisions), the value of this field shall be set to zero.

What is lldpV2Xdot3RemPortOperMauType?

The operational MAU type of the remote neighbor's sending device, encoded per RFC 4836 the same way as lldpV2Xdot3LocPortOperMauType; an admin compares local and remote MAU type values on a link to confirm both ends actually negotiated the same physical-layer mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1.4
snmpwalk -v2c -c public <target> LLDP-EXT-DOT3-V2-MIB::lldpV2Xdot3RemPortOperMauType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1.4.1
snmpget -v2c -c public <target> LLDP-EXT-DOT3-V2-MIB::lldpV2Xdot3RemPortOperMauType.1

Start monitoring Vendor-neutral IEEE standard (Ethernet switch/router/NIC supporting LLDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-EXT-DOT3-V2-MIB::lldpV2Xdot3RemPortOperMauType OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE standard (Ethernet switch/router/NIC supporting LLDP) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.111.2.802.1.1ieee802dot1mibsIEEE8021-TC-MIB
1.3.111.2.802.1.1.13lldpV2MIBLLDP-V2-MIB
1.3.111.2.802.1.1.13.1lldpV2ObjectsLLDP-V2-MIB
1.3.111.2.802.1.1.13.1.5lldpV2ExtensionsLLDP-V2-MIB
Numeric OIDNameModule
1.3.111.2.802.1.1.13.1.5.4623lldpV2Xdot3MIBLLDP-EXT-DOT3-V2-MIB
1.3.111.2.802.1.1.13.1.5.4623.1lldpV2Xdot3ObjectsLLDP-EXT-DOT3-V2-MIB
1.3.111.2.802.1.1.13.1.5.4623.1.3lldpV2Xdot3RemoteDataLLDP-EXT-DOT3-V2-MIB
1.3.111.2.802.1.1.13.1.5.4623.1.3.1lldpV2Xdot3RemPortTableLLDP-EXT-DOT3-V2-MIB
1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1lldpV2Xdot3RemPortEntryLLDP-EXT-DOT3-V2-MIB
1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1.4lldpV2Xdot3RemPortOperMauTypeLLDP-EXT-DOT3-V2-MIB