All MIBs › LLDP-EXT-DOT3-V2-MIB › lldpV2Xdot3PortConfigTLVsTxEnable
lldpV2Xdot3PortConfigTLVsTxEnable
Module: LLDP-EXT-DOT3-V2-MIB
OID (symbolic): LLDP-EXT-DOT3-V2-MIB::lldpV2Xdot3PortConfigTLVsTxEnable
OID (numeric): 1.3.111.2.802.1.1.13.1.5.4623.1.1.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: The lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype.
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that LLDP agent should transmit 'Power via MDI TLV'.
The bit 'unused(2)' is no longer used; this was used for the 'Link Aggregation TLV' in the previous version.
The bit 'maxFrameSize(3)' indicates that LLDP agent should transmit 'Maximum-frame-size TLV'.
The default value for lldpV2Xdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set.
The value of this object is restored from non-volatile storage after a re-initialization of the management system.
What is lldpV2Xdot3PortConfigTLVsTxEnable?
A bitmap controlling which optional IEEE 802.3 LLDP TLVs this port advertises: bit 0 for MAC/PHY configuration-status, bit 1 for Power-via-MDI, and bit 3 for Maximum-frame-size (bit 2 is retired, formerly Link Aggregation). The default is an empty set (no extra TLVs sent); an admin sets the relevant bits to make a port advertise, say, its PoE capabilities or negotiated speed/duplex info to LLDP neighbors like IP phones or switches.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.13.1.5.4623.1.1.1.1.1 snmpwalk -v2c -c public <target> LLDP-EXT-DOT3-V2-MIB::lldpV2Xdot3PortConfigTLVsTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.111.2.802.1.1.13.1.5.4623.1.1.1.1.1.1 snmpget -v2c -c public <target> LLDP-EXT-DOT3-V2-MIB::lldpV2Xdot3PortConfigTLVsTxEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.111.2.802.1.1.13.1.5.4623.1.1.1.1.1.1 s <value>
Start monitoring Vendor-neutral IEEE standard (Ethernet switch/router/NIC supporting LLDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-EXT-DOT3-V2-MIB::lldpV2Xdot3PortConfigTLVsTxEnable OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE standard (Ethernet switch/router/NIC supporting LLDP) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.111.2.802.1.1 | ieee802dot1mibs | IEEE8021-TC-MIB |
| 1.3.111.2.802.1.1.13 | lldpV2MIB | LLDP-V2-MIB |
| 1.3.111.2.802.1.1.13.1 | lldpV2Objects | LLDP-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5 | lldpV2Extensions | LLDP-V2-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.1.1.13.1.5.4623 | lldpV2Xdot3MIB | LLDP-EXT-DOT3-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.4623.1 | lldpV2Xdot3Objects | LLDP-EXT-DOT3-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.4623.1.1 | lldpV2Xdot3Config | LLDP-EXT-DOT3-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.4623.1.1.1 | lldpV2Xdot3PortConfigTable | LLDP-EXT-DOT3-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.4623.1.1.1.1 | lldpV2Xdot3PortConfigEntry | LLDP-EXT-DOT3-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.4623.1.1.1.1.1 | lldpV2Xdot3PortConfigTLVsTxEnable | LLDP-EXT-DOT3-V2-MIB |