All MIBs › LBMSH-MIB › statusTrapEnable
statusTrapEnable
Module: LBMSH-MIB
OID (symbolic): LBMSH-MIB::statusTrapEnable
OID (numeric): 1.3.6.1.4.1.43.1.8.4.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
By setting the value of this object to enable, the MSH will monitor the value of statusInputState for changes. If a change from open to close or from close to open occurs then an SNMP trap is generated. Note that the value of the object is de-bounced by the agent to prevent multiple closures of a 'bouncing' relay causing multiple SNMP traps!
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.1.8.4.1.2.1.3 snmpwalk -v2c -c public <target> LBMSH-MIB::statusTrapEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.1.8.4.1.2.1.3.1 snmpget -v2c -c public <target> LBMSH-MIB::statusTrapEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.1.8.4.1.2.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.1 | products | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.8 | hub | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.8.4 | linkBuilderMSH | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.8.4.1 | misc | LBHUB-MSH-MIB |
| 1.3.6.1.4.1.43.1.8.4.1.2 | statusInputTable | LBHUB-MSH-MIB |
| 1.3.6.1.4.1.43.1.8.4.1.2.1 | statusInputTableEntry | LBHUB-MSH-MIB |
| 1.3.6.1.4.1.43.1.8.4.1.2.1.3 | statusTrapEnable | LBMSH-MIB |