All MIBs › LANNET-MIB › ethPortFunctionalStatus
ethPortFunctionalStatus
Module: LANNET-MIB
OID (symbolic): LANNET-MIB::ethPortFunctionalStatus
OID (numeric): 1.3.6.1.4.1.81.12.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The value of this attribute reflects the functional status of LANNET synchronous ports. Note that it is not mandatory that all ports support all the enumerated states. Here is the minimal set possible states: OK - fully functional port, transmitting and receiving packets. RLD - receive link down condition on the port. TLD - transmit link down condition on the port. LocalJabber - fault condition indicating that the port emitted jabber. RemoteJabber - fault condition indicating that remote jabber was sensed at the port. IllSeq - Fault condition indicating an illegal synchronization sequence at the port. ShortCircuit - short-circuit fault condition detected at the port. PartitionOrLocalJabber - RemoteFaultOrLockLoss -
What is ethPortFunctionalStatus?
Reports the functional status of this Ethernet port using a set of LANNET-specific fault codes: ok (fully functional), rld/tld (receive/transmit link down), localJabber/remoteJabber (jabber detected locally or at the far end), illSeq (illegal sync sequence), shortCirc (short circuit), or combined conditions; not every port type supports every state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.12.3.1.1.3 snmpwalk -v2c -c public <target> LANNET-MIB::ethPortFunctionalStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.12.3.1.1.3.1 snmpget -v2c -c public <target> LANNET-MIB::ethPortFunctionalStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ethPortFunctionalStatus.1
Start monitoring LANNET modular Ethernet/Token Ring hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LANNET-MIB::ethPortFunctionalStatus OID value, configure state conditions and alerts, and monitor any LANNET modular Ethernet/Token Ring hub chassis from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.12 | eth | LANNET-MIB |
| 1.3.6.1.4.1.81.12.3 | ethPort | LANNET-MIB |
| 1.3.6.1.4.1.81.12.3.1 | ethPortTable | LANNET-MIB |
| 1.3.6.1.4.1.81.12.3.1.1 | ethPortEntry | LANNET-MIB |
| 1.3.6.1.4.1.81.12.3.1.1.3 | ethPortFunctionalStatus | LANNET-MIB |