All MIBs › Juniper-UNI-ATM-MIB › juniAtmProfileOverrideAssignIfCircuitOperStatus
juniAtmProfileOverrideAssignIfCircuitOperStatus
Module: Juniper-UNI-ATM-MIB
OID (symbolic): Juniper-UNI-ATM-MIB::juniAtmProfileOverrideAssignIfCircuitOperStatus
OID (numeric): 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The operational status of the profile override assignment identified by this entry.
It returns inactive(0), if a static ATM circuit with identical VPI/VCI values is present on the same ATM interface. In this case, this profile override will not be used to configure upper dynamic interfaces.
It returns active(1), if no static ATM circuit with identical VPI/VCI values is present on the same ATM interface. In this case, this profile override will be used to configure upper dynamic interfaces.
What is juniAtmProfileOverrideAssignIfCircuitOperStatus?
Reports whether this profile override is actually in effect: inactive if a statically configured ATM circuit with the same VPI/VCI already exists on the interface (in which case the override is ignored for dynamic upper-layer interfaces), or active if no such conflicting static circuit exists and the override is being applied; an admin checks this to confirm an override actually took effect rather than being shadowed by a static circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.7 snmpwalk -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmProfileOverrideAssignIfCircuitOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.7.1 snmpget -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmProfileOverrideAssignIfCircuitOperStatus.1
Start monitoring Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-UNI-ATM-MIB::juniAtmProfileOverrideAssignIfCircuitOperStatus OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.8 | juniAtmMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1 | juniAtmObjects | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.2 | juniAtmAal5IfLayer | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6 | juniAtmProfileOverrideAssignIfCircuitTable | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1 | juniAtmProfileOverrideAssignIfCircuitEntry | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.7 | juniAtmProfileOverrideAssignIfCircuitOperStatus | Juniper-UNI-ATM-MIB |