All MIBs › Juniper-UNI-ATM-MIB › juniAtmOamF4FlowEndToEndRowStatus
juniAtmOamF4FlowEndToEndRowStatus
Module: Juniper-UNI-ATM-MIB
OID (symbolic): Juniper-UNI-ATM-MIB::juniAtmOamF4FlowEndToEndRowStatus
OID (numeric): 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.6
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-create
Description: Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
To create/delete an entry in this table, the following entry objects MUST be explicitly configured: juniAtmOamF4FlowEndToEndRowStatus
F4 OAM end loopback and CC tests are mutually exclusive, enabling one will disable the other automatically. So, it is not allowed either at the circuit creation time or after the circuit creation to issue a request to enable end-to-end loopback and CC tests simultaneouly. Enabling/disabling CC sink and source is one time operation. To re-enable either CC source and sink in way different to earlier, both has to be disabled from the previous.
What is juniAtmOamF4FlowEndToEndRowStatus?
Creates or deletes the F4 end-to-end OAM configuration row for a VP; end-to-end loopback and continuity-check testing are mutually exclusive on the same VP (enabling one disables the other), and re-enabling CC source/sink in a different combination requires disabling both first, so an admin sequences these SETs carefully when switching a VP between loopback-based and CC-based monitoring.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.8 | juniAtmMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1 | juniAtmObjects | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1 | juniAtmIfLayer | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8 | juniAtmOamF4FlowEndToEndCfgTable | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1 | juniAtmOamF4FlowEndToEndCfgEntry | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.6 | juniAtmOamF4FlowEndToEndRowStatus | Juniper-UNI-ATM-MIB |