Juniper-UNI-ATM-MIB :: juniAtmOamF4FlowEndToEndLoopbackTimer

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Juniper-UNI-ATM-MIB › juniAtmOamF4FlowEndToEndLoopbackTimer

juniAtmOamF4FlowEndToEndLoopbackTimer

Module: Juniper-UNI-ATM-MIB

OID (symbolic): Juniper-UNI-ATM-MIB::juniAtmOamF4FlowEndToEndLoopbackTimer

OID (numeric): 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-create

Description: Configure the timer for sending the F4 flow end-to-end loopback OAM cells. Setting this value will enable sending the F4 end cells on the circuit. It is not allowed to set the value to -1 and whenever it is read as -1 that means sending end loopback is not enabled. Setting the loopback timer, other than -1, will enable sending the end cells.

What is juniAtmOamF4FlowEndToEndLoopbackTimer?

Sets how often, in seconds, this VP sends F4 end-to-end OAM loopback cells to verify connectivity; -1 (the default) means end-to-end loopback sending is disabled, and setting any other value both configures the interval and enables sending, so an admin might set 30 to get a loopback cell every 30 seconds for proactive VP-level connectivity checking.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.8juniAtmMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.8.1juniAtmObjectsJuniper-UNI-ATM-MIB
1.3.6.1.4.1.4874.2.2.8.1.1juniAtmIfLayerJuniper-UNI-ATM-MIB
1.3.6.1.4.1.4874.2.2.8.1.1.8juniAtmOamF4FlowEndToEndCfgTableJuniper-UNI-ATM-MIB
1.3.6.1.4.1.4874.2.2.8.1.1.8.1juniAtmOamF4FlowEndToEndCfgEntryJuniper-UNI-ATM-MIB
1.3.6.1.4.1.4874.2.2.8.1.1.8.1.3juniAtmOamF4FlowEndToEndLoopbackTimerJuniper-UNI-ATM-MIB