All MIBs › Juniper-UNI-ATM-MIB › juniAtmF4FlowOamSegmentVpOperationState
juniAtmF4FlowOamSegmentVpOperationState
Module: Juniper-UNI-ATM-MIB
OID (symbolic): Juniper-UNI-ATM-MIB::juniAtmF4FlowOamSegmentVpOperationState
OID (numeric): 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Represents the F4 end-to-end OAM flow VP operation states. It can take one of the following operational state values: vcAisState - AIS cell received or underlying physical layer reporting transmission path AIS. vcRdiState - RDI cell received. vcDownRetry - OAM loopback failed, using retry frequency to verify that the VC is really down. vcUpRetry - OAM loopback successful, using retry frequency to verify that the VC is really up. vcUp - OAM loopback successful after up retry verification. vcDown - OAM loopback failed after down retry verification. vcNotManaged - No verification via loopback cells being performed. vpAisState - State when F4 AIS cell is received. vpRdiState - State when F4 RDI cell is received. vcInVpRdiState - The data vc is down as a result of VP failure thorugh F4 Rdi oam cell. vcInVpAisState - The data vc is down as a result of VP failure through F4 Ais oam cell. vcSegmentAisState - Segment AIS cell received. vcSegRdiState - Segment RDI cell received.
What is juniAtmF4FlowOamSegmentVpOperationState?
Reports the current SEGMENT-level OAM operational state of this VP's F4 flow (vcUp, vcDown, vcAisState, vcSegmentAisState, etc.); note the source MIB's DESCRIPTION text was copy-pasted from the end-to-end version and still reads 'F4 end-to-end OAM flow,' but this object's OID position (juniAtmF4FlowOamSegmentStatsEntry) and name make clear it reports the segment-scope state instead. An admin reads it to see, for example, vcSegmentAisState, meaning an AIS was detected specifically within this VP's local segment rather than end-to-end.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.11 snmpwalk -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmF4FlowOamSegmentVpOperationState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.11.1 snmpget -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmF4FlowOamSegmentVpOperationState.1
Start monitoring Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-UNI-ATM-MIB::juniAtmF4FlowOamSegmentVpOperationState OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.8 | juniAtmMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1 | juniAtmObjects | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1 | juniAtmIfLayer | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12 | juniAtmF4FlowOamSegmentStatsTable | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1 | juniAtmF4FlowOamSegmentStatsEntry | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.11 | juniAtmF4FlowOamSegmentVpOperationState | Juniper-UNI-ATM-MIB |