All MIBs › Juniper-UNI-ATM-MIB › juniAtmF4FlowOamEndVpOperationState
juniAtmF4FlowOamEndVpOperationState
Module: Juniper-UNI-ATM-MIB
OID (symbolic): Juniper-UNI-ATM-MIB::juniAtmF4FlowOamEndVpOperationState
OID (numeric): 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Represents the F4 end-to-end OAM flow VP operation states. It can take one of the following operational state values: vcAisState - AIS cell received or underlying physical layer reporting transmission path AIS. vcRdiState - RDI cell received. vcDownRetry - OAM loopback failed, using retry frequency to verify that the VC is really down. vcUpRetry - OAM loopback successful, using retry frequency to verify that the VC is really up. vcUp - OAM loopback successful after up retry verification. vcDown - OAM loopback failed after down retry verification. vcNotManaged - No verification via loopback cells being performed. vpAisState - State when F4 AIS cell is received. vpRdiState - State when F4 RDI cell is received. vcInVpRdiState - The data vc is down as a result of VP failure thorugh F4 Rdi oam cell. vcInVpAisState - The data vc is down as a result of VP failure through F4 Ais oam cell. vcSegmentAisState - Segment AIS cell received. vcSegRdiState - Segment RDI cell received.
What is juniAtmF4FlowOamEndVpOperationState?
Reports the current end-to-end OAM operational state of this VP's F4 flow, such as vcUp/vcDown, vcAisState/vcRdiState if an alarm cell was received, or vcDownRetry/vcUpRetry while the router is re-verifying connectivity via loopback; an admin reads this to see, for example, that a VP is in vcRdiState, meaning the remote end has reported a fault even though no local AIS has been seen yet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.12 snmpwalk -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmF4FlowOamEndVpOperationState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.12.1 snmpget -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmF4FlowOamEndVpOperationState.1
Start monitoring Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-UNI-ATM-MIB::juniAtmF4FlowOamEndVpOperationState OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.8 | juniAtmMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1 | juniAtmObjects | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1 | juniAtmIfLayer | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11 | juniAtmF4FlowOamEndToEndStatsTable | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1 | juniAtmF4FlowOamEndToEndStatsEntry | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.12 | juniAtmF4FlowOamEndVpOperationState | Juniper-UNI-ATM-MIB |