All MIBs › Juniper-UNI-ATM-MIB › juniAtmCircuitVcOamOperStatus
juniAtmCircuitVcOamOperStatus
Module: Juniper-UNI-ATM-MIB
OID (symbolic): Juniper-UNI-ATM-MIB::juniAtmCircuitVcOamOperStatus
OID (numeric): 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The OAM VC operational status of this entry. oamVcOperStateAisState(0) - AIS cell received or underlying physical layer reporting transmission path AIS oamVcOperStateRdiState(1) - RDI cell received oamVcOperStateDownRetry(2) - OAM loopback failed, using retry frequency to verify that the VC is really down oamVcOperStateUpRetry(3) - OAM loopback successful, using retry frequency to verify that the VC is really up oamVcOperStateUp(4) - OAM loopback successful after up retry verification oamVcOperStateDown(5) - OAM loopback failed after down retry verification oamVcOperStateNotManaged(6)- No verification via loopback cells being performed oamVcOperStateVpAis(7) - F4 AIS cell received oamVcOperStateVpRdi(8) - F4 RDI cell received oamVcOperStateVcInVpRdi(9) - F4 RDI cell received; path failure oamVcOperStateVcInVpAis(10)- F4 AIS cell received; path failure oamVcOperStateSegAis(11) - Segment AIS cell received oamVcOperStateSegRdi(12) - Segment RDI cell received oamVcOperStateGenAis(13) - Connection failure; generating AIS cells.
What is juniAtmCircuitVcOamOperStatus?
Reports the detailed OAM VC operational state for this circuit, distinguishing AIS/RDI alarm conditions, up/down-retry verification phases, VP-inherited failures (vcInVpAis/Rdi), segment-level alarms, and a generating-AIS state when the connection itself has failed; an admin reads this for finer-grained fault isolation than the simpler loopback-only status in juniAtmCircuitOamLoopbackOperStatus.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6 snmpwalk -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmCircuitVcOamOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6.1 snmpget -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmCircuitVcOamOperStatus.1
Start monitoring Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-UNI-ATM-MIB::juniAtmCircuitVcOamOperStatus OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.8 | juniAtmMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1 | juniAtmObjects | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.3 | juniAtmSubIfLayer | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4 | juniAtmCircuitOamTable | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1 | juniAtmCircuitOamEntry | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6 | juniAtmCircuitVcOamOperStatus | Juniper-UNI-ATM-MIB |