All MIBs › Juniper-UNI-ATM-MIB › juniAtmCircuitOamLoopbackOperStatus
juniAtmCircuitOamLoopbackOperStatus
Module: Juniper-UNI-ATM-MIB
OID (symbolic): Juniper-UNI-ATM-MIB::juniAtmCircuitOamLoopbackOperStatus
OID (numeric): 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The operational status of OAM for the interface identified by this entry. oamOperStatusNotSupported(0) - OAM not supported on this interface oamOperStatusDisabled(1) - VC integrity disabled oamOperStatusSent(2) - Loopback sent, awaiting response oamOperStatusReceived(3) - Loopback response received, awaiting frequency oamOperStatusFailed(4) - Loopback response not received, or invalid response received
What is juniAtmCircuitOamLoopbackOperStatus?
Reports the current OAM loopback state machine status for this circuit: not supported, disabled, a loopback sent and awaiting response, a response received and awaiting the next verification interval, or failed (no/invalid response); an admin watches for oamOperStatusFailed to know a PVC has likely gone down based on missed loopback replies.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5 snmpwalk -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmCircuitOamLoopbackOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5.1 snmpget -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmCircuitOamLoopbackOperStatus.1
Start monitoring Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-UNI-ATM-MIB::juniAtmCircuitOamLoopbackOperStatus OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.8 | juniAtmMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1 | juniAtmObjects | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.3 | juniAtmSubIfLayer | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4 | juniAtmCircuitOamTable | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1 | juniAtmCircuitOamEntry | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5 | juniAtmCircuitOamLoopbackOperStatus | Juniper-UNI-ATM-MIB |