All MIBs › Juniper-UNI-ATM-MIB › juniAtmAal5NextIfIndex
juniAtmAal5NextIfIndex
Module: Juniper-UNI-ATM-MIB
OID (symbolic): Juniper-UNI-ATM-MIB::juniAtmAal5NextIfIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.8.1.2.1
Node type: OBJECT-TYPE
Type: JuniNextIfIndex
Access: read-only
Description: Coordinate ifIndex value allocation for entries in juniAtmAal5IfTable.
A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
What is juniAtmAal5NextIfIndex?
Returns the next available ifIndex value to use when creating an entry in juniAtmAal5IfTable (the AAL5 sub-layer interface table), or zero if none is available; an admin (via management software) reads this immediately before setting juniAtmAal5IfRowStatus to createAndGo for a new AAL5 interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.2.1 snmpwalk -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmAal5NextIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.8.1.2.1.1 snmpget -v2c -c public <target> Juniper-UNI-ATM-MIB::juniAtmAal5NextIfIndex.1
Start monitoring Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-UNI-ATM-MIB::juniAtmAal5NextIfIndex OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ATM/DSL broadband access platform (ATM UNI interfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.8 | juniAtmMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1 | juniAtmObjects | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.2 | juniAtmAal5IfLayer | Juniper-UNI-ATM-MIB |
| 1.3.6.1.4.1.4874.2.2.8.1.2.1 | juniAtmAal5NextIfIndex | Juniper-UNI-ATM-MIB |