Juniper-IPV6-PROFILE-MIB :: juniIpv6ProfileSrcAddrValidEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Juniper-IPV6-PROFILE-MIB › juniIpv6ProfileSrcAddrValidEnable

juniIpv6ProfileSrcAddrValidEnable

Module: Juniper-IPV6-PROFILE-MIB

OID (symbolic): Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileSrcAddrValidEnable

OID (numeric): 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7

Node type: OBJECT-TYPE

Type: JuniEnable

Access: read-write

Description: Enable/disable whether source addresses in received IPv6 packets are validated. Validation is performed by looking up the source IPv6 address in the routing database and determining whether the packet arrived on the expected interface; if not, the packet is discarded.

What is juniIpv6ProfileSrcAddrValidEnable?

Enables (default disable) reverse-path-style source address validation on IPv6 interfaces built from this profile: incoming packets are dropped if their source address isn't reachable via the interface they arrived on. Turn this on to guard against spoofed-source IPv6 traffic on interfaces using this profile.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7
snmpwalk -v2c -c public <target> Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileSrcAddrValidEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7.1
snmpget -v2c -c public <target> Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileSrcAddrValidEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7.1 s <value>

Start monitoring Juniper E-series broadband edge router (subscriber IPv6 service profiles) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileSrcAddrValidEnable OID value, configure state conditions and alerts, and monitor any Juniper E-series broadband edge router (subscriber IPv6 service profiles) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.68juniIpv6ProfileMIBJuniper-IPV6-PROFILE-MIB
1.3.6.1.4.1.4874.2.2.68.1juniIpv6ProfileObjectsJuniper-IPV6-PROFILE-MIB
1.3.6.1.4.1.4874.2.2.68.1.1juniIpv6ProfileJuniper-IPV6-PROFILE-MIB
1.3.6.1.4.1.4874.2.2.68.1.1.1juniIpv6ProfileTableJuniper-IPV6-PROFILE-MIB
1.3.6.1.4.1.4874.2.2.68.1.1.1.1juniIpv6ProfileEntryJuniper-IPV6-PROFILE-MIB
1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7juniIpv6ProfileSrcAddrValidEnableJuniper-IPV6-PROFILE-MIB