All MIBs › Juniper-IPV6-PROFILE-MIB › juniIpv6ProfileSetMap
juniIpv6ProfileSetMap
Module: Juniper-IPV6-PROFILE-MIB
OID (symbolic): Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileSetMap
OID (numeric): 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2
Node type: OBJECT-TYPE
Type: JuniSetMap
Access: read-write
Description: A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use.
The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set).
When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry.
If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur.
Once set, bits can only be cleared by explicitly configuring JuniSetMap.
What is juniIpv6ProfileSetMap?
Bitmap tracking which attributes in this IPv6 profile entry have been explicitly configured versus left at their side-effect defaults; the index objects and this object itself are never represented in the bitmap. Explicitly setting this object overrides both prior bit settings and any simultaneous side-effect settings from the same request, useful when you need precise control over which profile attributes count as 'configured'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2 snmpwalk -v2c -c public <target> Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileSetMap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2.1 snmpget -v2c -c public <target> Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileSetMap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2.1 s <value>
Start monitoring Juniper E-series broadband edge router (subscriber IPv6 service profiles) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileSetMap OID value, configure state conditions and alerts, and monitor any Juniper E-series broadband edge router (subscriber IPv6 service profiles) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.68 | juniIpv6ProfileMIB | Juniper-IPV6-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.68.1 | juniIpv6ProfileObjects | Juniper-IPV6-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.68.1.1 | juniIpv6Profile | Juniper-IPV6-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.68.1.1.1 | juniIpv6ProfileTable | Juniper-IPV6-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.68.1.1.1.1 | juniIpv6ProfileEntry | Juniper-IPV6-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2 | juniIpv6ProfileSetMap | Juniper-IPV6-PROFILE-MIB |