JNX-PPP-MIB :: jnxPppMlPppNetworkRowStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JNX-PPP-MIB › jnxPppMlPppNetworkRowStatus

jnxPppMlPppNetworkRowStatus

Module: JNX-PPP-MIB

OID (symbolic): JNX-PPP-MIB::jnxPppMlPppNetworkRowStatus

OID (numeric): 1.3.6.1.4.1.2636.3.68.1.1.6.5.1.4

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-only

Description: Controls creation/deletion of entries in this table with read-create maximum access , according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured:

jnxPppMlPppNetworkConfigLowerIfIndex jnxPppMlPppNetworkBundleName jnxPppMlPppNetworkConfigRowStatus

In addition, when creating an entry the following conditions must hold: A value for jnxPppMlPppNetworkConfigIndex must have been determined previously, by reading jnxPppMlPppNextNetworkIfIndex. The interface identified by jnxPppMlPppNetworkConfigLowerIfInde must exist by a creation request to the jnxPppMlPppLinkConfigTable. The bundleName specified in jnxPppMlPppNetworkBundleName must have been created first in the jnxPppMlPppBundleTable. A corresponding entry in ifTable/ifXTable/jnxIfTable is created/destroyed as a result of creating/destroying an entry in this table.

The following values can be read from this object: active(1)

What is jnxPppMlPppNetworkRowStatus?

Row-lifecycle control for this MLPPP network-interface entry; creating it requires jnxPppMlPppNetworkConfigLowerIfIndex and jnxPppMlPppNetworkBundleName to already reference existing rows, and it reads back active(1) once created.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.6.5.1.4
snmpwalk -v2c -c public <target> JNX-PPP-MIB::jnxPppMlPppNetworkRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.6.5.1.4.1
snmpget -v2c -c public <target> JNX-PPP-MIB::jnxPppMlPppNetworkRowStatus.1

Start monitoring Juniper Networks router (PPP WAN circuits) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-PPP-MIB::jnxPppMlPppNetworkRowStatus OID value, configure state conditions and alerts, and monitor any Juniper Networks router (PPP WAN circuits) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.3jnxMibsJUNIPER-SMI
1.3.6.1.4.1.2636.3.68jnxPppMibRootJUNIPER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2636.3.68.1jnxPppMIBJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1jnxPPPObjectsJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6jnxPppMlPppJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.5jnxPppMlPppNetworkConfigTableJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.5.1jnxPppMlPppNetworkConfigEntryJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.5.1.4jnxPppMlPppNetworkRowStatusJNX-PPP-MIB