JNX-PPP-MIB :: jnxPppMlPppLinkConfigAuthentication2

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JNX-PPP-MIB › jnxPppMlPppLinkConfigAuthentication2

jnxPppMlPppLinkConfigAuthentication2

Module: JNX-PPP-MIB

OID (symbolic): JNX-PPP-MIB::jnxPppMlPppLinkConfigAuthentication2

OID (numeric): 1.3.6.1.4.1.2636.3.68.1.1.6.3.1.19

Node type: OBJECT-TYPE

Type: JnxNibbleConfig

Access: read-only

Description: A configuration variable comprised of nibbles i.e. 4 bits, such that a client can supply a list of 0 to 8 selections. The least significant nibble is the first value of the list, and the most significant nibble is the last value. The value in each field ranges from 0 to 15, however the first nibble with value 0 indicates the end of the list. Repetition of values is not allowed. Segregation of values is not allowed.

Valid Values are: none - 0 pap - 1 chap - 2 eap - 3

Example valid encoding: 0x00000321 0x00000012

Not a valid encoding: 0x00000121 0x01002001

If authentication negotiation is not supported for this PPP interface and With read-create maximum access, then any attempt to explicitly set this object will result in a notWritable error and it will be implicitly set to the DEFVAL on row creation. Setting this object to null will set jnxPppMlPppLinkConfigAuthenticatorVirtualRouter object to an empty string.Setting this object along with the jnxPppMlPppLinkConfigAuthentication object will return an i nconsistentValue error.

What is jnxPppMlPppLinkConfigAuthentication2?

Current authentication configuration for this MLPPP member link, packed as a nibble-list (0=none, 1=pap, 2=chap, 3=eap) allowing up to 8 fallback methods in order — the MLPPP analogue of jnxPppLinkConfigAuthentication2, replacing the always-none jnxPppMlPppLinkConfigAuthentication.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.6.3.1.19
snmpwalk -v2c -c public <target> JNX-PPP-MIB::jnxPppMlPppLinkConfigAuthentication2

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.6.3.1.19.1
snmpget -v2c -c public <target> JNX-PPP-MIB::jnxPppMlPppLinkConfigAuthentication2.1

Start monitoring Juniper Networks router (PPP WAN circuits) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-PPP-MIB::jnxPppMlPppLinkConfigAuthentication2 OID value, configure state conditions and alerts, and monitor any Juniper Networks router (PPP WAN circuits) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.3jnxMibsJUNIPER-SMI
1.3.6.1.4.1.2636.3.68jnxPppMibRootJUNIPER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2636.3.68.1jnxPppMIBJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1jnxPPPObjectsJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6jnxPppMlPppJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.3jnxPppMlPppLinkConfigTableJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.3.1jnxPppMlPppLinkConfigEntryJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.3.1.19jnxPppMlPppLinkConfigAuthentication2JNX-PPP-MIB