JNX-PPP-MIB :: jnxPppMlPppLinkConfigAuthentication

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JNX-PPP-MIB › jnxPppMlPppLinkConfigAuthentication

jnxPppMlPppLinkConfigAuthentication

Module: JNX-PPP-MIB

OID (symbolic): JNX-PPP-MIB::jnxPppMlPppLinkConfigAuthentication

OID (numeric): 1.3.6.1.4.1.2636.3.68.1.1.6.3.1.5

Node type: OBJECT-TYPE

Type: JnxPppAuthentication

Access: read-only

Description: Specifies the type(s) of authentication, if any, to be negotiated with the peer: none No authentication is negotiated. pap PAP negotiation only. chap CHAP negotiation only. papChap PAP negotiation is attempted first; if fails, attempt CHAP. chapPap CHAP negotiation is attempted first; if fails, attempt PAP.

If authentication negotiation is not supported for this MLPPP interface, then any attempt to explicitely set this object will result in a notWritable error and it will be implicitily set to the DEFVAL on row creation. This object returns a none (0) value on the get operation. New object jnxPppMlPppLinkConfigAuthentication2 will reflect the configured values. Setting this object along with the jnxPppMlPppLinkConfigAuthentication2 object will return an inconsistentValue error.

What is jnxPppMlPppLinkConfigAuthentication?

Deprecated PPP authentication mode configured for this MLPPP member link; always reads back none(0), superseded by jnxPppMlPppLinkConfigAuthentication2.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.6.3.1.5
snmpwalk -v2c -c public <target> JNX-PPP-MIB::jnxPppMlPppLinkConfigAuthentication

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.6.3.1.5.1
snmpget -v2c -c public <target> JNX-PPP-MIB::jnxPppMlPppLinkConfigAuthentication.1

Start monitoring Juniper Networks router (PPP WAN circuits) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-PPP-MIB::jnxPppMlPppLinkConfigAuthentication OID value, configure state conditions and alerts, and monitor any Juniper Networks router (PPP WAN circuits) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.3jnxMibsJUNIPER-SMI
1.3.6.1.4.1.2636.3.68jnxPppMibRootJUNIPER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2636.3.68.1jnxPppMIBJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1jnxPPPObjectsJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6jnxPppMlPppJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.3jnxPppMlPppLinkConfigTableJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.3.1jnxPppMlPppLinkConfigEntryJNX-PPP-MIB
1.3.6.1.4.1.2636.3.68.1.1.6.3.1.5jnxPppMlPppLinkConfigAuthenticationJNX-PPP-MIB