All MIBs › JNX-PPP-MIB › jnxPppMlPppBindRowStatus
jnxPppMlPppBindRowStatus
Module: JNX-PPP-MIB
OID (symbolic): JNX-PPP-MIB::jnxPppMlPppBindRowStatus
OID (numeric): 1.3.6.1.4.1.2636.3.68.1.1.6.6.1.3
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-only
Description: Controls creation/deletion of entries in this table with read-create maximum access, according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
To create an entry in this table, the following entry objects MUST be explicitly configured: jnxPppMlPppBindRowStatus
In addition, when creating an entry the following conditions must hold: The interfaces identified by jnxPppMlPppBindNetworkIfIndex and jnxPppMlPppBindLinkIfIndex must be created in the jnxPppMlPppNetworkConfigTable and jnxPppMlPppLinkConfigTable respectively. A MLPPP bundle must be associated with the jnxPppMlPppNetworkIfIndex and exist in the jnxPppMibPppBundleTable. A corresponding entry in ifStackTable is created/destroyed as a result of creating/destroying an entry in this table.
The following values can be read from this object: active(1)
What is jnxPppMlPppBindRowStatus?
Row-lifecycle control binding one MLPPP link interface to one MLPPP network interface/bundle; creating it requires both interfaces, and the bundle, to already exist, and it drives a corresponding ifStackTable entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.6.6.1.3 snmpwalk -v2c -c public <target> JNX-PPP-MIB::jnxPppMlPppBindRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.6.6.1.3.1 snmpget -v2c -c public <target> JNX-PPP-MIB::jnxPppMlPppBindRowStatus.1
Start monitoring Juniper Networks router (PPP WAN circuits) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-PPP-MIB::jnxPppMlPppBindRowStatus OID value, configure state conditions and alerts, and monitor any Juniper Networks router (PPP WAN circuits) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.68 | jnxPppMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.68.1 | jnxPppMIB | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1 | jnxPPPObjects | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.6 | jnxPppMlPpp | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.6.6 | jnxPppMlPppLinkBindTable | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.6.6.1 | jnxPppMlPppLinkBindEntry | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.6.6.1.3 | jnxPppMlPppBindRowStatus | JNX-PPP-MIB |