All MIBs › JNX-PPP-MIB › jnxPppLinkStatusTerminateReason
jnxPppLinkStatusTerminateReason
Module: JNX-PPP-MIB
OID (symbolic): JNX-PPP-MIB::jnxPppLinkStatusTerminateReason
OID (numeric): 1.3.6.1.4.1.2636.3.68.1.1.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Reason the PPP link was terminated: none None. other Not specified. adminDisable Interface administratively disabled. lowerLayerDown Underlying interface is down. noUpperInterface No interface above PPP. authenticationFailure Authentication failed. peerTerminated Peer initiated termination. peerRenegotiated Peer initiated renegotiation. maxRetriesExceeded Maximum number of config retries exceeded. negotiationFailure Failed to negotiate LCP option. keepaliveFailure Keepalive failed. sessionTimeout Maximum session period expired. inactivityTimeout Maximum inactivity period expired. addressLeaseExpired Lease for network address expired. adminLogout Session administratively terminated. tunnelFailed Associated tunnel failed. tunnelDisconnected Associated tunnel disconnected. loopback Loopback detected.
What is jnxPppLinkStatusTerminateReason?
Enumerates why a PPP link's LCP session ended — e.g. authenticationFailure(5), keepaliveFailure(10), peerTerminated(6), or tunnelDisconnected(16) — the first thing to check when troubleshooting a PPP interface that keeps bouncing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.1.1.1.1 snmpwalk -v2c -c public <target> JNX-PPP-MIB::jnxPppLinkStatusTerminateReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.1.1.1.1.1 snmpget -v2c -c public <target> JNX-PPP-MIB::jnxPppLinkStatusTerminateReason.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxPppLinkStatusTerminateReason.1
Start monitoring Juniper Networks router (PPP WAN circuits) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-PPP-MIB::jnxPppLinkStatusTerminateReason OID value, configure state conditions and alerts, and monitor any Juniper Networks router (PPP WAN circuits) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.68 | jnxPppMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.68.1 | jnxPppMIB | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1 | jnxPPPObjects | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.1 | jnxPppLcp | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.1.1 | jnxPppLinkStatusTable | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.1.1.1 | jnxPppLinkStatusEntry | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.1.1.1.1 | jnxPppLinkStatusTerminateReason | JNX-PPP-MIB |