All MIBs › JNX-PPP-MIB › jnxPppLinkConfigAuthentication
jnxPppLinkConfigAuthentication
Module: JNX-PPP-MIB
OID (symbolic): JNX-PPP-MIB::jnxPppLinkConfigAuthentication
OID (numeric): 1.3.6.1.4.1.2636.3.68.1.1.1.2.1.5
Node type: OBJECT-TYPE
Type: JnxPppAuthentication
Access: read-only
Description: Specifies the type(s) of authentication, if any, to be negotiated with the peer: none No authentication is negotiated. pap PAP negotiation only. chap CHAP negotiation only. papChap PAP negotiation is attempted first; if fails, attempt CHAP. chapPap CHAP negotiation is attempted first; if fails, attempt PAP.
If authentication negotiation is not supported for this PPP interface, then any attempt to explicitely set this object if READ-CREATE maximum access is supported will result in a notWritable error and it will be implicitily set to the DEFVAL on row creation. Setting this object to none(0) will set jnxPppLinkConfigAuthenticatorRouting Instance object to an empty string. This object returns a null(0) value on the get operation. New object jnxPppLinkConfigAuthentication2 will reflect the configured values. Setting this object along with the jnxPppLinkConfigAuthentication2 object will return an inconsistentValue error.
What is jnxPppLinkConfigAuthentication?
Deprecated PPP authentication mode (none/PAP/CHAP/PAP-then-CHAP/CHAP-then-PAP) configured for this link; always reads back none(0) now, since jnxPppLinkConfigAuthentication2 is the object that reflects the real configured value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.1.2.1.5 snmpwalk -v2c -c public <target> JNX-PPP-MIB::jnxPppLinkConfigAuthentication
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.68.1.1.1.2.1.5.1 snmpget -v2c -c public <target> JNX-PPP-MIB::jnxPppLinkConfigAuthentication.1
Start monitoring Juniper Networks router (PPP WAN circuits) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-PPP-MIB::jnxPppLinkConfigAuthentication OID value, configure state conditions and alerts, and monitor any Juniper Networks router (PPP WAN circuits) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.68 | jnxPppMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.68.1 | jnxPppMIB | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1 | jnxPPPObjects | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.1 | jnxPppLcp | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.1.2 | jnxPppLinkConfigTable | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.1.2.1 | jnxPppLinkConfigEntry | JNX-PPP-MIB |
| 1.3.6.1.4.1.2636.3.68.1.1.1.2.1.5 | jnxPppLinkConfigAuthentication | JNX-PPP-MIB |