IP-INTERFACE-MANAGEMENT-MIB

All MIBs › IP-INTERFACE-MANAGEMENT-MIB

Organization: Lucent's Concord Technology Center (CTC)

Last Updated: 1999-02-11

Category: IP and Core Protocols, Network Interfaces, Vendor: Lucent/Ascend

Description: Lucent/Avaya IP interface management MIB providing SNMP objects for detailed IP interface configuration and status monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IP-INTERFACE-MANAGEMENT-MIB?

This is Lucent/Avaya's proprietary "Cajun Private IP Interface Management" MIB, extending beyond standard ifTable/ipAddrTable objects with vendor-specific IP interface configuration and status for Cajun-brand switches. Based on the module description, it likely exposes per-interface IP configuration state and possibly interface up/down or address-assignment status. It would be used to monitor the software/configuration status of IP interfaces, such as whether an interface's IP configuration was correctly applied, on Cajun switching hardware. As a "Private" extension it complements rather than replaces standard IETF IP/Interfaces MIBs. It is deployed on Lucent/Avaya Cajun switches within enterprise or campus network environments. Engineers can download the IP-INTERFACE-MANAGEMENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IP-INTERFACE-MANAGEMENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lucent/Avaya Cajun switches

Monitoring Examples

No object or table names were available in the provided excerpt, so specific OIDs cannot be cited. Given the module description ("Cajun Private IP Interface Management MIB"), an admin would typically poll per-interface IP address and configuration-status objects to detect an interface that failed to acquire or apply its configured IP address.

Imported Objects

From Cajun-ROOT

cjnMgmt

OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
cjnIpIfMgmt	1.3.6.1.4.1.1751.2.43.3.1			Cajun Private IP Interface Management MIB
cjnIpIfGroup	1.3.6.1.4.1.1751.2.43.3.1.1
INT cjnIpIfNextIndex	1.3.6.1.4.1.1751.2.43.3.1.1.1	INTEGER	read-only	The next available IfIndex. This number should be used to create new rows in the IpIfTable
cjnIpIfTable	1.3.6.1.4.1.1751.2.43.3.1.1.2		not-accessible	A list of Cajun IP interface entries. The number of entries is given by the value of cjnIpIfNumber.
cjnIpIfEntry	1.3.6.1.4.1.1751.2.43.3.1.1.2.1		not-accessible	An cajun IP Interface instance
INT cjnIpIfIndex	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.1	INTEGER	read-only	The globally unique identifier for this interface. This number MUST correlate with the IfTable's IfIndex in MIB-II or RFC2233
ROW cjnIpIfRowStatus	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.2	RowStatus	read-create	The Status of this entry in the table. Note the available states: active(1), -- Obviously Active. notInService(2) -- Interface configured but disabled. notReady(3), -- Interface NOT configured. createAndGo(4), createAndWait(5) or destroy(6)
IP cjnIpIfIpAddress	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.3	IpAddress	read-create	The IP Address associated with this IP interface.
IP cjnIpIfIpSubnetMask	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.4	IpAddress	read-create	The IP Subnet Mask associated with this IP interface.
INT cjnIpIfMacFormat	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.5	INTEGER	read-create	The ethernet framing type used on this IP interface.
INT cjnIpIfVlanIfIndex	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.6	INTEGER	read-create	The interface index of the VLAN or Ethernet or Serial console for this interface. This number MUST correlate with the IfTable's IfIndex in MIB-II or RFC2233.
OCT cjnIpIfName	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.7	OCTET STRING	read-create	The protocol Unique name associated with this interface. This name is limited to 32 characters and may appear in other protocol interface entry such as IPX, Appletalk but MAY NOT be duplicated within the cjnIpIfTable. In otherwords other protocols can use this interface name but IP may only have this name associated with one interface.
INT cjnIpIfIpRouting	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.8	INTEGER	read-create	The Consumption / Forwarding mode assocated with this IP Interface. The RoutingAndMgmt mode enables IP Routing and local Packet consumption. The MgmtOnly mode disables IP Forwarding but continues to allow local Packet consumption on this interface. The routingOnly mode is disables Local Packet consumption but continues to allow IP Forwarding on this interface
INT cjnIpIfSpoofCheckEnabled	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.9	INTEGER	read-create	This feature is not supported at this time.
INT cjnIpIfProxyArpEnabled	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.10	INTEGER	read-create	enables / disables Proxy Arp functionality on this interface.
INT cjnIpIfIcmpRedirEnabled	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.11	INTEGER	read-create	enables / disables Icmp Redirect messages from originating from this interface.
INT cjnIpIfUdpRbcastMode	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.12	INTEGER	read-create	configures the NetBIOS UDP Rebroadcast mode on this interface.
INT cjnIpIfAdminStatus	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.13	INTEGER	read-create	The administrative state of this interface.
INT cjnIpIfStatus	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.14	INTEGER	read-only	The current state of this interface.
INT cjnIpIfBootpDhcpGateway	1.3.6.1.4.1.1751.2.43.3.1.1.2.1.15	INTEGER	read-create	Enable or disable the designation of this interface as that which will 'receive' BOOTP/DHCP requests with a source IP address of 0.0.0.0. This is used on a multinetted interface when it is otherwise ambiguous as to which interface 'receives' the request, and is important because the IP address of the receiving interface is inserted into the giaddr field of the request before the request is relayed to the BOOTP/DHCP server. If this attribute is disabled, then: - if only one IP interface exists on a VLAN, that IP address is inserted into the request - if more than one IP address exists on a VLAN, the router will choose an interface If more than one IP interface on a given VLAN has this attribute enabled, the router will choose an interface among those with the attribute enabled.

RFC description

Manages IP interface configuration for Lucent Cajun routing platforms including IP addressing and security features.

Start monitoring Lucent/Avaya Cajun switch (private IP interface management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IP-INTERFACE-MANAGEMENT-MIB

What Is IP-INTERFACE-MANAGEMENT-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description