Description: This PML object returns the current state of the particular consumable. cAuthLevel1 - Consumable is at Authentication Level 1 cAuthLevel2 - Consumable is at Authentication Level 2 cAuthLevel3 - Consumable is at Authentication Level 3 cAuthLevel4 - Consumable is at Authentication Level 4 cAuthLevel5 - Consumable is at Authentication Level 5 cGenuineHPUnsupported - Cartridge is GenuineHP intended for another product cDefectiveMemory - Cartridge has a defective memory tag cMissingMemory - Memory tag is missing from the cartridge cLowCondition - Consumable has reached the engine low threshold cOutCondition - Consumable has reached its out threshold cIncorrect - Cartridge inserted is not the correct one cMissing - Consumable is missing from the printer cConfigurableLow - Consumable has reached the configurable low threshold value cStatusArevalid - The status reported on other bits are valid only if the bit is set to 1. If it is 0, the values are invalid. cExpired - Is the cartridge expired, which is determined by the formatter. cFailure - Cartridge has failed determined by the engine. cLeak - Cartridge has a leak as determined by the engine. cUnknownManufacturer - the brand of the cartridge is unknown as determined by the engine. cUnsupported --- Cartridge is not supported as determined by the engine. These are the possible states and whenever the consumable is in any of these states, the appropriate bit will be set. The cLowCondition will be set when the consumable reaches the engine low threshold, and cConfigurableLow will be set when the consumable reaches the Configurable Low threshold value. For non-cartridge supplies only cLowCondition, cOutCondition, and cMissing will be supported. Additional information: This object returns the current state of the particular consumable. cAuthLevel1 - HP genuine cAuthLevel2 - Condor's Non-HP (Canon's Clone) cAuthLevel3 - refilled cAuthLevel5 - Condor's ApprovedOEM cOutCondition - empty cMissing - not installed cConfigurableLow - configurable low cExpired - cartridge, determined by formatter cFailure - failure cLeak - leak cUnknownManufacturer - Non-HP cartridge which has not been enabled cUnsupported - something wrong on a new cartridge, not compatable cStatusAreValid - The Status reported on other bits are valid only if this bit is set to 1. If it is 0, the values are invalid. These are the possible states and whenever a Consumable is in any of these states, the appropriate bit will be set.