All MIBs › IEEE802171-CFM-MIB › dot1agCfmMdFaultAlarmDestDomain
dot1agCfmMdFaultAlarmDestDomain
Module: IEEE802171-CFM-MIB
OID (symbolic): IEEE802171-CFM-MIB::dot1agCfmMdFaultAlarmDestDomain
OID (numeric): 1.0.8802.1.1.3.1.4.2.1.6
Node type: OBJECT-TYPE
Type: TransportDomain
Access: read-create
Description: The transportDomain for the address to which Fault Alarms are to be transmitted.
Typical values will be one of (not all inclusive) list:
transportDomainUdpIpv4 (from TRANSPORT-ADDRESS-MIB) transportDomainUdpIpv6 (from TRANSPORT-ADDRESS-MIB) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB)
The value 'zeroDotZero' indicates 'Fault Alarms are not to be transmitted', in which case the related object of SYNTAX TransportAddress must have a zero-length OCTET STRING as a value.
What is dot1agCfmMdFaultAlarmDestDomain?
Sets the transport domain (e.g. UDP/IPv4, UDP/IPv6, or raw 802 frames) for the address fault alarms from this Maintenance Domain are sent to; 'zeroDotZero' means alarms are not transmitted. Configure this together with dot1agCfmMdFaulAlarmDestAddress when you want CFM fault alarms from this domain forwarded to a specific management station.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.0 | std | START-MIB |
| 1.0.8802 | iso8802 | START-MIB |
| 1.0.8802.1 | ieee802dot1 | START-MIB |
| 1.0.8802.1.1 | ieee802dot1mibs | START-MIB |
| 1.0.8802.1.1.3 | ieee8021SecyMIB | IEEE8021-SECY-MIB |
| 1.0.8802.1.1.3.1 | secyMIBObjects | IEEE8021-SECY-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.0.8802.1.1.3.1.4 | dot1agCfmMd | IEEE802171-CFM-MIB |
| 1.0.8802.1.1.3.1.4.2 | dot1agCfmMdTable | IEEE802171-CFM-MIB |
| 1.0.8802.1.1.3.1.4.2.1 | dot1agCfmMdEntry | IEEE802171-CFM-MIB |
| 1.0.8802.1.1.3.1.4.2.1.6 | dot1agCfmMdFaultAlarmDestDomain | IEEE802171-CFM-MIB |