ICF-ETWIST :: evthThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsICF-ETWISTevthThreshold

evthThreshold

Module: ICF-ETWIST

OID (symbolic): ICF-ETWIST::evthThreshold

OID (numeric): 1.3.6.1.4.1.11.2.14.1.7.3.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: ********* THIS OBJECT IS OBSOLETE *********

The threshold against which the variable specified in evthObject is tested over the time interval specified in the evthTimeInterval When the threshold is met or exceeded, the event is triggered. The event will not trigger again until the variable falls to or below the evthHysteresis value, and then meets or exceeds the threshold.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.1.7.3.4
snmpwalk -v2c -c public <target> ICF-ETWIST::evthThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.1.7.3.4.1
snmpget -v2c -c public <target> ICF-ETWIST::evthThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.1.7.3.4.1 i <value>

Start monitoring HP Integrated Communication Facility (ICF) Ethernet twisted-pair hub/repeater with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ICF-ETWIST::evthThreshold OID value, configure state conditions and alerts, and monitor any HP Integrated Communication Facility (ICF) Ethernet twisted-pair hub/repeater from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.1icfCommonHP-ICF
1.3.6.1.4.1.11.2.14.1.7icfEventHP-ICF
1.3.6.1.4.1.11.2.14.1.7.3evtThresholdTableHP-ICF
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.1.7.3.4evthThresholdICF-ETWIST