IB-PLATFORMONE-MIB

All MIBs › IB-PLATFORMONE-MIB

Organization: Infoblox

Last Updated: 2010-11-15

Category: Vendor: Infoblox

Description: Infoblox MIB for monitoring platform-level health including CPU, memory, disk, and hardware status of Infoblox appliances.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IB-PLATFORMONE-MIB?

IB-PLATFORMONE-MIB is Infoblox's proprietary platform-health MIB for its DDI/Grid appliances, part of the same "One" MIB family as its DHCPv6 counterpart. It exposes hardware identity and health objects, including CPU temperature and hardware type/ID, alongside cluster-replication status covering each grid node's replication state, IP address, and queue/timestamp of last replication to and from the master. This is explicitly a hardware-and-software status MIB: it lets an admin monitor CPU temperature for overheating, node replication status and queue depth to confirm grid nodes are staying in sync, and system/CPU monitor objects for overall load. It has no formal dependency on standard IETF hardware MIBs, being a fully proprietary Infoblox implementation, though it functions alongside other Infoblox "One" service MIBs for complete appliance visibility. It is deployed across Infoblox Grid clusters where multiple appliances replicate configuration/data and must be monitored for hardware health and replication lag. Network engineers evaluating or troubleshooting this functionality can download the IB-PLATFORMONE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IB-PLATFORMONE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Infoblox Grid DDI appliances

Monitoring Examples

An admin would poll ibClusterReplicationStatusTable/ibClusterReplicationStatusEntry to check each node's ibNodeReplicationStatus and ibNodeQueueToMaster/ibNodeQueueFromMaster; a growing queue depth or stale ibNodeLastRepTimeFromMaster indicates replication lag, while ibCPUTemperature climbing toward a threshold flags a cooling problem on that node.

What Can Be Monitored

CPU temperature
cluster replication status per node
replication queue depth (to/from master)
last replication timestamp
hardware type/ID
CPU load

Imported Objects

From IB-SMI-MIB

IbIpAddr
IbString
ibPlatformOne	OBJECT-IDENTITY

From RFC1155-SMI

Counter

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using ibNetworkMonitorDNSSecurityInvalidPortCount OID:

Select an Infoblox Grid DDI appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ibNetworkMonitorDNSSecurityInvalidPortCount into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of DNS responses to invalid ports. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ibClusterReplicationStatusEntry	1.3.6.1.4.1.7779.3.1.1.2.1.2.1		not-accessible	A conceptual row containing info about a particular grid replication status.
ibClusterReplicationStatusTable	1.3.6.1.4.1.7779.3.1.1.2.1.2		not-accessible	A table of Physical Node's Grid Replication Status.
STR ibCPUTemperature	1.3.6.1.4.1.7779.3.1.1.2.1.1	IbString	read-only	Infoblox One CPU temperature.
STR ibHardwareId	1.3.6.1.4.1.7779.3.1.1.2.1.5	IbString	read-only	Infoblox One hardware id
STR ibHardwareType	1.3.6.1.4.1.7779.3.1.1.2.1.4	IbString	read-only	Infoblox One hardware type
ibMemberNode1ServiceStatusEntry	1.3.6.1.4.1.7779.3.1.1.2.1.10.1		not-accessible	A conceptual row containing info about a particular service status.
ibMemberNode1ServiceStatusTable	1.3.6.1.4.1.7779.3.1.1.2.1.10		not-accessible	A table of Physical Node's Service Status.
ibMemberNode2ServiceStatusEntry	1.3.6.1.4.1.7779.3.1.1.2.1.11.1		not-accessible	A conceptual row containing info about a particular service status.
ibMemberNode2ServiceStatusTable	1.3.6.1.4.1.7779.3.1.1.2.1.11		not-accessible	A table of Physical Node's Service Status.
ibMemberServiceStatusEntry	1.3.6.1.4.1.7779.3.1.1.2.1.9.1		not-accessible	A conceptual row containing info about a particular service status.
ibMemberServiceStatusTable	1.3.6.1.4.1.7779.3.1.1.2.1.9		not-accessible	A table of member service status.
ibNetworkMonitor	1.3.6.1.4.1.7779.3.1.1.2.1.3
ibNetworkMonitorDNS	1.3.6.1.4.1.7779.3.1.1.2.1.3.1
ibNetworkMonitorDNSAA	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3
ibNetworkMonitorDNSAAT1	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.1
ibNetworkMonitorDNSAAT1440	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.5
INT ibNetworkMonitorDNSAAT1440AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.5.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 1440 minutes (24 hours) where the reply was authoritative
INT ibNetworkMonitorDNSAAT1440Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.5.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 1440 minutes (24 hours) where the reply was authoritative
ibNetworkMonitorDNSAAT15	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.3
INT ibNetworkMonitorDNSAAT15AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.3.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 15 minutes where the reply was authoritative
INT ibNetworkMonitorDNSAAT15Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.3.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 15 minutes where the reply was authoritative
INT ibNetworkMonitorDNSAAT1AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.1.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 1 minute where the reply was authoritative
INT ibNetworkMonitorDNSAAT1Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.1.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 1 minute where the reply was authoritative
ibNetworkMonitorDNSAAT5	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.2
INT ibNetworkMonitorDNSAAT5AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.2.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 5 minutes where the reply was authoritative
INT ibNetworkMonitorDNSAAT5Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.2.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 5 minutes where the reply was authoritative
ibNetworkMonitorDNSAAT60	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.4
INT ibNetworkMonitorDNSAAT60AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.4.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 60 minutes where the reply was authoritative
INT ibNetworkMonitorDNSAAT60Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.3.4.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 60 minutes where the reply was authoritative
INT ibNetworkMonitorDNSActive	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.1	INTEGER	read-only	Equal to 1 if monitoring is active. No other data is likely to be correct if not active
ibNetworkMonitorDNSNonAA	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2
ibNetworkMonitorDNSNonAAT1	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.1
ibNetworkMonitorDNSNonAAT1440	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.5
INT ibNetworkMonitorDNSNonAAT1440AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.5.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 1440 minutes (24 hours) where the reply was non authoritative
INT ibNetworkMonitorDNSNonAAT1440Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.5.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 1440 minutes (24 hours) where the reply was non authoritative
ibNetworkMonitorDNSNonAAT15	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.3
INT ibNetworkMonitorDNSNonAAT15AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.3.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 15 minutes where the reply was non authoritative
INT ibNetworkMonitorDNSNonAAT15Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.3.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 15 minutes where the reply was non authoritative
INT ibNetworkMonitorDNSNonAAT1AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.1.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 1 minute where the reply was non authoritative
INT ibNetworkMonitorDNSNonAAT1Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.1.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 1 minute where the reply was non authoritative
ibNetworkMonitorDNSNonAAT5	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.2
INT ibNetworkMonitorDNSNonAAT5AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.2.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 5 minutes where the reply was non authoritative
INT ibNetworkMonitorDNSNonAAT5Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.2.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 5 minutes where the reply was non authoritative
ibNetworkMonitorDNSNonAAT60	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.4
INT ibNetworkMonitorDNSNonAAT60AvgLatency	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.4.1	INTEGER	read-only	Average Latencies (in microseconds) for incoming DNS queries during the last 60 minutes where the reply was non authoritative
INT ibNetworkMonitorDNSNonAAT60Count	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.2.4.2	INTEGER	read-only	Number of queries used to calculate the average latencies during the last 60 minutes where the reply was non authoritative
ibNetworkMonitorDNSSecurity	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4
ibNetworkMonitorDNSSecurityInvalidPort	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.1
INT ibNetworkMonitorDNSSecurityInvalidPort1	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.1.1	INTEGER	read-only	Number of DNS responses to invalid ports during the last 1 minute
INT ibNetworkMonitorDNSSecurityInvalidPort1440	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.1.5	INTEGER	read-only	Number of DNS responses to invalid ports during the last 1440 minutes (24 hours)
INT ibNetworkMonitorDNSSecurityInvalidPort15	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.1.3	INTEGER	read-only	Number of DNS responses to invalid ports during the last 15 minutes
INT ibNetworkMonitorDNSSecurityInvalidPort5	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.1.2	INTEGER	read-only	Number of DNS responses to invalid ports during the last 5 minutes
INT ibNetworkMonitorDNSSecurityInvalidPort60	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.1.4	INTEGER	read-only	Number of DNS responses to invalid ports during the last 60 minutes
CTR ibNetworkMonitorDNSSecurityInvalidPortCountEx	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.1.6	Counter	read-only	Number of DNS responses to invalid ports
CTR ibNetworkMonitorDNSSecurityInvalidPortOnly	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.3	Counter	read-only	Number of DNS responses to invalid ports with a valid TXID
ibNetworkMonitorDNSSecurityInvalidTxid	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.2
INT ibNetworkMonitorDNSSecurityInvalidTxid1	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.2.1	INTEGER	read-only	Number of DNS responses with an invalid TXID during the last 1 minute
INT ibNetworkMonitorDNSSecurityInvalidTxid1440	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.2.5	INTEGER	read-only	Number of DNS responses with an invalid TXID during the last 1440 minutes (24 hours)
INT ibNetworkMonitorDNSSecurityInvalidTxid15	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.2.3	INTEGER	read-only	Number of DNS responses with an invalid TXID during the last 15 minutes
INT ibNetworkMonitorDNSSecurityInvalidTxid5	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.2.2	INTEGER	read-only	Number of DNS responses with an invalid TXID during the last 5 minutes
INT ibNetworkMonitorDNSSecurityInvalidTxid60	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.2.4	INTEGER	read-only	Number of DNS responses with an invalid TXID during the last 60 minutes
CTR ibNetworkMonitorDNSSecurityInvalidTxidAndPort	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.5	Counter	read-only	Number of DNS responses to an invalid port and with an invalid TXID
CTR ibNetworkMonitorDNSSecurityInvalidTxidCount	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.2.6	Counter	read-only	Number of DNS responses with an invalid TXID
CTR ibNetworkMonitorDNSSecurityInvalidTxidOnly	1.3.6.1.4.1.7779.3.1.1.2.1.3.1.4.4	Counter	read-only	Number of DNS responses to valid ports with an invalid TXID
STR ibNiosVersion	1.3.6.1.4.1.7779.3.1.1.2.1.7	IbString	read-only	Infoblox One NIOS version
STR ibNode1ServiceDesc	1.3.6.1.4.1.7779.3.1.1.2.1.10.1.3	IbString	read-only	Service Description.
IBS ibNode1ServiceName	1.3.6.1.4.1.7779.3.1.1.2.1.10.1.1	IbServiceNames	read-only	Service Name.
IBS ibNode1ServiceStatus	1.3.6.1.4.1.7779.3.1.1.2.1.10.1.2	IbServiceStates	read-only	Service Status.
STR ibNode2ServiceDesc	1.3.6.1.4.1.7779.3.1.1.2.1.11.1.3	IbString	read-only	Service Description.
IBS ibNode2ServiceName	1.3.6.1.4.1.7779.3.1.1.2.1.11.1.1	IbServiceNames	read-only	Service Name.
IBS ibNode2ServiceStatus	1.3.6.1.4.1.7779.3.1.1.2.1.11.1.2	IbServiceStates	read-only	Service Status.
IBI ibNodeIPAddress	1.3.6.1.4.1.7779.3.1.1.2.1.2.1.1	IbIpAddr	read-only	Physical node IP address.
STR ibNodeLastRepTimeFromMaster	1.3.6.1.4.1.7779.3.1.1.2.1.2.1.4	IbString	read-only	Last sent time from master.
STR ibNodeLastRepTimeToMaster	1.3.6.1.4.1.7779.3.1.1.2.1.2.1.6	IbString	read-only	Last receive time to master.
INT ibNodeQueueFromMaster	1.3.6.1.4.1.7779.3.1.1.2.1.2.1.3	INTEGER	read-only	Sent queue size from master.
INT ibNodeQueueToMaster	1.3.6.1.4.1.7779.3.1.1.2.1.2.1.5	INTEGER	read-only	Receive queue size to master.
STR ibNodeReplicationStatus	1.3.6.1.4.1.7779.3.1.1.2.1.2.1.2	IbString	read-only	Replication queue status for this node.
ibPlatformModule	1.3.6.1.4.1.7779.3.1.1.2.1			This file defines the Infoblox One platform MIB.
STR ibSerialNumber	1.3.6.1.4.1.7779.3.1.1.2.1.6	IbString	read-only	Infoblox One device serial number
STR ibServiceDesc	1.3.6.1.4.1.7779.3.1.1.2.1.9.1.3	IbString	read-only	Service Description.
IBS ibServiceName	1.3.6.1.4.1.7779.3.1.1.2.1.9.1.1	IbServiceNames	read-only	Service Name.
IBS ibServiceStatus	1.3.6.1.4.1.7779.3.1.1.2.1.9.1.2	IbServiceStates	read-only	Service Status.
ibSystemMonitor	1.3.6.1.4.1.7779.3.1.1.2.1.8
ibSystemMonitorCpu	1.3.6.1.4.1.7779.3.1.1.2.1.8.1
INT ibSystemMonitorCpuUsage	1.3.6.1.4.1.7779.3.1.1.2.1.8.1.1	INTEGER	read-only	Current average CPU usage
ibSystemMonitorMem	1.3.6.1.4.1.7779.3.1.1.2.1.8.2
INT ibSystemMonitorMemUsage	1.3.6.1.4.1.7779.3.1.1.2.1.8.2.1	INTEGER	read-only	Current Memory usage

RFC description

Infoblox One platform management including cluster replication, CPU, memory, and service status monitoring.

Start monitoring Infoblox Grid DDI appliances with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IB-PLATFORMONE-MIB