HUAWEI-WLAN-SECURITY-MIB :: hwWsecAuthPSKPassPhrase

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-WLAN-SECURITY-MIB › hwWsecAuthPSKPassPhrase

hwWsecAuthPSKPassPhrase

Module: HUAWEI-WLAN-SECURITY-MIB

OID (symbolic): HUAWEI-WLAN-SECURITY-MIB::hwWsecAuthPSKPassPhrase

OID (numeric): 1.3.6.1.4.1.2011.6.139.6.4.1.19

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The PSK, for when WAPI/RSNA in PSK mode is the selected AKM suite, is configured by hwWsecAuthPSKValue. An alternative manner of setting the PSK uses the password-to-key algorithm. This variable provides a means to enter a pass-phrase. When this object is written, the WAPI/RSNA entity shall use the password-to-key algorithm to derive a pre-shared and populate hwWsecAuthPSKValue with this key. This object is logically write-only. Reading this variable shall return unsuccessful status or null or zero.

What is hwWsecAuthPSKPassPhrase?

Sets the pre-shared key as an ASCII pass-phrase instead of raw hex; writing this object derives the actual key via the password-to-key algorithm and populates hwWsecAuthPSKValue. Reading this object always returns an unsuccessful status, null, or zero since it is logically write-only.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.139.6.4.1.19
snmpwalk -v2c -c public <target> HUAWEI-WLAN-SECURITY-MIB::hwWsecAuthPSKPassPhrase

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.139.6.4.1.19.1
snmpget -v2c -c public <target> HUAWEI-WLAN-SECURITY-MIB::hwWsecAuthPSKPassPhrase.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.139.6.4.1.19.1 s <value>

Start monitoring Huawei wireless access point/WLAN controller (WPA/WPA2/802.1X security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-WLAN-SECURITY-MIB::hwWsecAuthPSKPassPhrase OID value, configure state conditions and alerts, and monitor any Huawei wireless access point/WLAN controller (WPA/WPA2/802.1X security) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.6huaweiUtilityHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.6.139hwWlanHUAWEI-WLAN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.6.139.6hwWlanSecurityHUAWEI-WLAN-SECURITY-MIB
1.3.6.1.4.1.2011.6.139.6.4hwWsecAuthSuitesTableHUAWEI-WLAN-SECURITY-MIB
1.3.6.1.4.1.2011.6.139.6.4.1hwWsecAuthSuitesEntryHUAWEI-WLAN-SECURITY-MIB
1.3.6.1.4.1.2011.6.139.6.4.1.19hwWsecAuthPSKPassPhraseHUAWEI-WLAN-SECURITY-MIB