All MIBs › HUAWEI-VDSL2-LINE-MIB › vdsl2PMLCurr15MSes
vdsl2PMLCurr15MSes
Module: HUAWEI-VDSL2-LINE-MIB
OID (symbolic): HUAWEI-VDSL2-LINE-MIB::vdsl2PMLCurr15MSes
OID (numeric): 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.7
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: Count of seconds during this interval that there was: xTU-C: If G.998.4 is supported and retransmission is enabled in the near-end received direction, a SES is declared if during a 1-second interval, there is one or more severe loss of error-free throughput (seftr) defect in the near-end received direction. Or else, an SES is declared if, during a 1 second interval, there are 18 or more CRC 8 anomalies in one or more of the received bearer channels, or one or more LOS defects, or one or more SEF defects, or one or more LPR defects.
xTU-R: If G.998.4 is supported and retransmission is enabled in the far-end received direction, a SES-LFE is declared if during a 1-second interval, there is one or more severe loss of error-free throughput (seftr) defect in the far-end received direction. Or else, an SES is declared if, during a 1 second interval, there are 18 or more FEBE anomalies in one or more of the transmitted bearer channels, or one or more far end LOS defects, or one or more RDI defects, or one or more LPR FE defects. This parameter is inhibited during UAS. Unit: seconds
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.7 snmpwalk -v2c -c public <target> HUAWEI-VDSL2-LINE-MIB::vdsl2PMLCurr15MSes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.7.1 snmpget -v2c -c public <target> HUAWEI-VDSL2-LINE-MIB::vdsl2PMLCurr15MSes.1
Start monitoring Huawei DSLAM/broadband access node/MSAN (VDSL2 line) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-VDSL2-LINE-MIB::vdsl2PMLCurr15MSes OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/broadband access node/MSAN (VDSL2 line) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.115 | vdslMIB | HUAWEI-VDSL2-LINE-MIB |
| 1.3.6.1.4.1.2011.6.115.1 | vdsl2 | HUAWEI-VDSL2-LINE-MIB |
| 1.3.6.1.4.1.2011.6.115.1.4 | vdsl2PM | HUAWEI-VDSL2-LINE-MIB |
| 1.3.6.1.4.1.2011.6.115.1.4.1 | vdsl2PMLine | HUAWEI-VDSL2-LINE-MIB |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1 | vdsl2PMLineCurrTable | HUAWEI-VDSL2-LINE-MIB |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1 | vdsl2PMLineCurrEntry | HUAWEI-VDSL2-LINE-MIB |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.7 | vdsl2PMLCurr15MSes | HUAWEI-VDSL2-LINE-MIB |