All MIBs › HUAWEI-PIM-STD-MIB › hwPimInvalidRegisterMsgsRcvd
hwPimInvalidRegisterMsgsRcvd
Module: HUAWEI-PIM-STD-MIB
OID (symbolic): HUAWEI-PIM-STD-MIB::hwPimInvalidRegisterMsgsRcvd
OID (numeric): 1.3.6.1.4.1.2011.5.25.149.4.1.32
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of invalid PIM Register messages that have been received by this device.
A PIM Register message is invalid if either
o the destination address of the Register message does not match the Group to RP mapping on this device, or
o this device believes the group address to be within an SSM address range, but this Register implies ASM usage.
These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction.
The active Group to RP mapping on this device is specified by the object hwPimGroupMappingPimMode. If there is no such mapping, then the object hwPimGroupMappingPimMode is absent. The RP address contained in the invalid Register is hwPimInvalidRegisterRp.
Multicast data carried by invalid Register messages is discarded. The discarded data is from a source directly connected to hwPimInvalidRegisterOrigin, and is addressed to hwPimInvalidRegisterGroup.
Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
What is hwPimInvalidRegisterMsgsRcvd?
Read-only counter of PIM Register messages this router has rejected as invalid -- for example because the destination doesn't match this device's current Group-to-RP mapping, or because the group is believed to be SSM-only but was registered as ASM. A count that keeps climbing over several minutes points to a persisting misconfiguration (e.g. mismatched RP mapping) rather than transient convergence, and the associated hwPimInvalidRegisterOrigin/Group/Rp objects identify the specific flow involved.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.149.4.1.32 snmpwalk -v2c -c public <target> HUAWEI-PIM-STD-MIB::hwPimInvalidRegisterMsgsRcvd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.149.4.1.32.1 snmpget -v2c -c public <target> HUAWEI-PIM-STD-MIB::hwPimInvalidRegisterMsgsRcvd.1
Start monitoring Huawei core/edge router running PIM-SM/PIM-DM multicast with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-PIM-STD-MIB::hwPimInvalidRegisterMsgsRcvd OID value, configure state conditions and alerts, and monitor any Huawei core/edge router running PIM-SM/PIM-DM multicast from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25.149 | hwMcast | HUAWEI-IPMCAST-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.149.4 | hwPimStdMib | HUAWEI-PIM-STD-MIB |
| 1.3.6.1.4.1.2011.5.25.149.4.1 | hwPim | HUAWEI-PIM-STD-MIB |
| 1.3.6.1.4.1.2011.5.25.149.4.1.32 | hwPimInvalidRegisterMsgsRcvd | HUAWEI-PIM-STD-MIB |