All MIBs › HUAWEI-NGADSL-LINE-MIB › hwadsl2LineStatusRtxUsedDs
hwadsl2LineStatusRtxUsedDs
Module: HUAWEI-NGADSL-LINE-MIB
OID (symbolic): HUAWEI-NGADSL-LINE-MIB::hwadsl2LineStatusRtxUsedDs
OID (numeric): 1.3.6.1.4.1.2011.6.138.1.1.1.1.7
Node type: OBJECT-TYPE
Type: Adsl2StatusRtxUsed
Access: read-only
Description: This parameter specifies whether G.998.4 retransmission is used in a given transmit direction. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnusedNotSupportedXtuc(3) - RTX not in use, due to not supported by the XTU-C 4. rtxUnusedNotSupportedXtur(4) - RTX not in use, due to not supported by the XTU-R 5. rtxUnusedNotSupportedXtucAndXtur(5) - RTX not in use, due to not supported by the XTU-C and XTU-R 6. invalidValue(-1) - Invalid value
What is hwadsl2LineStatusRtxUsedDs?
Reports whether G.998.4 retransmission is actually in use on this line and, if not, why: rtxInuse, or one of several rtxUnused reasons (forbidden by RTX_MODE, or not supported by the XTU-C and/or XTU-R). Admins check this to confirm retransmission is really active on a line where they expected it, rather than silently falling back due to a CPE that doesn't support it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.138.1.1.1.1.7 snmpwalk -v2c -c public <target> HUAWEI-NGADSL-LINE-MIB::hwadsl2LineStatusRtxUsedDs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.138.1.1.1.1.7.1 snmpget -v2c -c public <target> HUAWEI-NGADSL-LINE-MIB::hwadsl2LineStatusRtxUsedDs.1
Start monitoring Huawei DSLAM/MSAN broadband access equipment (Next-Generation ADSL2/ADSL2+) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-NGADSL-LINE-MIB::hwadsl2LineStatusRtxUsedDs OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/MSAN broadband access equipment (Next-Generation ADSL2/ADSL2+) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.138 | hwadsl2MIB | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1 | hwadsl2 | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.1 | hwadsl2Line | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.1.1 | hwadsl2LineTable | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1 | hwadsl2LineEntry | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.7 | hwadsl2LineStatusRtxUsedDs | HUAWEI-NGADSL-LINE-MIB |