All MIBs › HUAWEI-NGADSL-LINE-MIB › hwadsl2LineStatusInitResult
hwadsl2LineStatusInitResult
Module: HUAWEI-NGADSL-LINE-MIB
OID (symbolic): HUAWEI-NGADSL-LINE-MIB::hwadsl2LineStatusInitResult
OID (numeric): 1.3.6.1.4.1.2011.6.138.1.1.1.1.6
Node type: OBJECT-TYPE
Type: Hwadsl2InitResult
Access: read-only
Description: Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) - Successful initialization 2. configError(1) - Configuration failure 3. configNotFeasible(2) - Configuration details not supported 4. commFail(3) - Communication failure 5. noPeerXtu(4) - Peer xTU not detected 6. otherCause(5) - Other initialization failure reason 7. ginpNotSelected(6) - G.998.4 Retransmission mode was not selected while RTX_MODE = FORCED or with RTX_MODE = RTX_TESTMODE 8. invalidValue(-1) - Invalid value
What is hwadsl2LineStatusInitResult?
Reports the outcome of the last full initialization on the line - noFail for success, or a specific failure such as configError, commFail, noPeerXtu, or ginpNotSelected (when G.998.4 retransmission mode wasn't selected despite being forced). Admins read this after a line fails to come up to see exactly why training didn't succeed, e.g. distinguishing a local configuration problem from no response at all from the remote modem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.138.1.1.1.1.6 snmpwalk -v2c -c public <target> HUAWEI-NGADSL-LINE-MIB::hwadsl2LineStatusInitResult
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.138.1.1.1.1.6.1 snmpget -v2c -c public <target> HUAWEI-NGADSL-LINE-MIB::hwadsl2LineStatusInitResult.1
Start monitoring Huawei DSLAM/MSAN broadband access equipment (Next-Generation ADSL2/ADSL2+) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-NGADSL-LINE-MIB::hwadsl2LineStatusInitResult OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/MSAN broadband access equipment (Next-Generation ADSL2/ADSL2+) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.138 | hwadsl2MIB | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1 | hwadsl2 | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.1 | hwadsl2Line | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.1.1 | hwadsl2LineTable | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1 | hwadsl2LineEntry | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.6 | hwadsl2LineStatusInitResult | HUAWEI-NGADSL-LINE-MIB |