All MIBs › HUAWEI-NGADSL-LINE-MIB › hwadsl2ChStatusINP
hwadsl2ChStatusINP
Module: HUAWEI-NGADSL-LINE-MIB
OID (symbolic): HUAWEI-NGADSL-LINE-MIB::hwadsl2ChStatusINP
OID (numeric): 1.3.6.1.4.1.2011.6.138.1.2.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: If retransmission is not used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0 state. In the L1 or L2 state, the parameter contains the INP in the previous L0 state. If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against SHINE on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. Unit: 0.1 DMT symbol
What is hwadsl2ChStatusINP?
Huawei's private-MIB counterpart to adsl2ChStatusINP: it reports the actual impulse noise protection in 0.1 DMT symbol units, but distinguishes two cases - if retransmission (PhyR) is off, it's the plain INP in the current or last L0 state; if retransmission is on, it's the INP against SHINE (single high-impulse noise events) instead. Admins use it the same way, to gauge a line's noise resilience, but should note it may reflect the retransmission-aware INP value depending on configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.138.1.2.1.1.3 snmpwalk -v2c -c public <target> HUAWEI-NGADSL-LINE-MIB::hwadsl2ChStatusINP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.138.1.2.1.1.3.1 snmpget -v2c -c public <target> HUAWEI-NGADSL-LINE-MIB::hwadsl2ChStatusINP.1
Start monitoring Huawei DSLAM/MSAN broadband access equipment (Next-Generation ADSL2/ADSL2+) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-NGADSL-LINE-MIB::hwadsl2ChStatusINP OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/MSAN broadband access equipment (Next-Generation ADSL2/ADSL2+) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.138 | hwadsl2MIB | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1 | hwadsl2 | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.2 | hwadsl2Status | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.2.1 | hwadsl2ChannelStatusTable | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1 | hwadsl2ChannelStatusEntry | HUAWEI-NGADSL-LINE-MIB |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.3 | hwadsl2ChStatusINP | HUAWEI-NGADSL-LINE-MIB |