All MIBs › HUAWEI-NGADSL-LINE-MIB › adsl2LConfProfDpboEsCableModelA
adsl2LConfProfDpboEsCableModelA
Module: HUAWEI-NGADSL-LINE-MIB
OID (symbolic): HUAWEI-NGADSL-LINE-MIB::adsl2LConfProfDpboEsCableModelA
OID (numeric): 1.3.6.1.2.1.10.238.1.5.1.2.1.65540
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. This object is defaulted 256.
What is adsl2LConfProfDpboEsCableModelA?
One of three scalar coefficients (A of A/B/C) describing the frequency-dependent loss of the E-side cable for DPBO calculations, coded -1 to 1.5 in steps of 1/256 and defaulted to 256 (i.e. 0). Admins normally leave this at the vendor-recommended default unless they are modeling a non-standard cable type for accurate power back-off.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5 | adsl2Profile | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1 | adsl2ProfileLine | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2 | adsl2LineConfProfTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1 | adsl2LineConfProfEntry | ADSL2-LINE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65540 | adsl2LConfProfDpboEsCableModelA | HUAWEI-NGADSL-LINE-MIB |