All MIBs › HUAWEI-NGADSL-LINE-MIB › adsl2ChAlarmConfProfileMonitoringRateUs
adsl2ChAlarmConfProfileMonitoringRateUs
Module: HUAWEI-NGADSL-LINE-MIB
OID (symbolic): HUAWEI-NGADSL-LINE-MIB::adsl2ChAlarmConfProfileMonitoringRateUs
OID (numeric): 1.3.6.1.2.1.10.238.1.5.3.3.1.65536
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The channel monitoring rate upstream. When the value you set is larger than the value of the rate upstream defined in the channel profile, it will not be successful. The value 0 means that no threshold is specified for the associated counter. This object is defaulted 0. Unit: bits/second
What is adsl2ChAlarmConfProfileMonitoringRateUs?
The upstream counterpart of adsl2ChAlarmConfProfileMonitoringRateDs: a configurable threshold, in bits/second, that this channel alarm profile monitors for upstream rate, with 0 (the default) meaning no threshold is set. Operators raise it to be alerted when a line's upstream sync falls below an expected minimum.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5 | adsl2Profile | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.3 | adsl2ProfileAlarmConf | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.3.3 | adsl2ChAlarmConfProfileTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.3.3.1 | adsl2ChAlarmConfProfileEntry | ADSL2-LINE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238.1.5.3.3.1.65536 | adsl2ChAlarmConfProfileMonitoringRateUs | HUAWEI-NGADSL-LINE-MIB |