All MIBs › HUAWEI-LswQos-MIB
Organization: HUAWEI LANSWITCH
Last Updated: 2002-11-19
Category: Quality of Service, Vendor: Huawei
Description: Huawei LAN switch QoS MIB for managing traffic classification, queuing policies, and bandwidth profiles on Huawei enterprise Ethernet switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-LswQos-MIB?
HUAWEI-LswQos-MIB is a vendor-specific MIB from Huawei (originally a Huawei-3Com joint draft) for LAN switch QoS and ACL-related traffic management, confirming the hint's description of traffic classification, queuing, and bandwidth control on Huawei enterprise Ethernet switches. It exposes a large set of tables including hwRateLimitTable (rate-limiting/policing with conform/exceed actions and remarking), hwTrafficShapeTable and hwLineRateTable (shaping and port line-rate limits), hwQueueTable/hwPortQueueTable and hwWredTable/hwPortWredTable (queue scheduling and WRED congestion management), hwCosToDscpMapTable/hwDscpToCosMapTable and related priority-mapping tables, hwRedirectTable (traffic redirection to slot/VLAN/next-hop), and the hwMirroringGroupMirrorTable/hwMirroringGroupMonitorTable family for port mirroring. It depends on the HUAWEI-3COM-OID-MIB enterprise tree (lswCommon) for its OID root and on standard RowStatus/TruthValue/MacAddress types from SNMPv2-TC. It is deployed on Huawei enterprise LAN switches to configure and audit QoS policy, and network engineers researching the HUAWEI-LswQos-MIB MIB will find it documents this extensive classification, queuing, and mirroring object set.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-LswQos-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei enterprise LAN switches (Huawei-3Com QoS/ACL platform)
Monitoring Examples
An operator polls hwRateLimitTable to confirm hwRateLimitTargetRateKbps and the conform/exceed action are applied to a given interface, and checks hwPortWredTable to verify WRED drop thresholds are active on the egress queues; persistent tail-drops with hwWredTable showing no configured drop profile would indicate congestion management was never enabled on that port.
What Can Be Monitored
- rate-limiting/policing configuration and actions
- traffic shaping and port line-rate settings
- queue scheduling and WRED congestion parameters
- CoS/DSCP/local-precedence mapping tables
- traffic redirection rules
- port mirroring group configuration
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-3COM-OID-MIB
| lswCommon | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using hwRateLimitMeterStatByteCount OID:
Select a Huawei enterprise LAN switch (QoS/ACL classification, queuing, mirroring) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwRateLimitMeterStatByteCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The counter of conform byte. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwLswQosAclMib | 1.3.6.1.4.1.2011.2.23.1.16 | Module node for qos and acl. | ||
| hwLswQosMibObject | 1.3.6.1.4.1.2011.2.23.1.16.2 | |||
| INT hwPriorityTrustMode | 1.3.6.1.4.1.2011.2.23.1.16.2.1 | INTEGER | read-write | Priority type of inbound queue. |
| INT hwPortMonitorBothIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.2 | INTEGER | read-write | The ifIndex of in/out monitor port. |
| hwQueueTable | 1.3.6.1.4.1.2011.2.23.1.16.2.3 | not-accessible | Queue table which contains queue entry. | |
| hwQueueEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1 | not-accessible | The configuration information of queue. | |
| INT hwQueueIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.1 | INTEGER | read-only | ifIndex of port. |
| INT hwQueueScheduleMode | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.2 | INTEGER | read-write | The mode of the queue schedule. |
| INT hwQueueWeight1 | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.3 | INTEGER | read-write | If queue mode is wfq, then hwQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hwQueueWeight1 represent the weight of queue 1. |
| INT hwQueueWeight2 | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.4 | INTEGER | read-write | If queue mode is wfq, then hwQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hwQueueWeight2 represent the weight of queue 2. |
| INT hwQueueWeight3 | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.5 | INTEGER | read-write | If queue mode is wfq, then hwQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hwQueueWeight3 represent the weight of queue 3. |
| INT hwQueueWeight4 | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.6 | INTEGER | read-write | If queue mode is wfq, then hwQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hwQueueWeight4 represent the weight of queue 4. |
| INT hwQueueMaxDelay | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.7 | INTEGER | read-write | |
| INT hwQueueWeight5 | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.8 | INTEGER | read-write | If queue mode is wfq, then hwQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hwQueueWeight5 represent the weight of queue 5. |
| INT hwQueueWeight6 | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.9 | INTEGER | read-write | If queue mode is wfq, then hwQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hwQueueWeight6 represent the weight of queue 6. |
| INT hwQueueWeight7 | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.10 | INTEGER | read-write | If queue mode is wfq, then hwQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hwQueueWeight7 represent the weight of queue 7. |
| INT hwQueueWeight8 | 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.11 | INTEGER | read-write | If queue mode is wfq, then hwQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hwQueueWeight8 represent the weight of queue 8. |
| hwRateLimitTable | 1.3.6.1.4.1.2011.2.23.1.16.2.4 | not-accessible | Rate limit table which contains limit entry. | |
| hwRateLimitEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1 | not-accessible | The configuration information of the rate-limited port. | |
| INT hwRateLimitAclIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.1 | INTEGER | read-create | Index of acl rule. |
| INT hwRateLimitIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.2 | INTEGER | read-create | ifIndex of the rate-limited port. |
| INT hwRateLimitVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.3 | INTEGER | read-create | Vlan ID. |
| INT hwRateLimitDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.4 | INTEGER | read-create | Direction of the rate-limited port. |
| INT hwRateLimitUserAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.5 | INTEGER | read-create | The number of user acl. |
| INT hwRateLimitUserAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.6 | INTEGER | read-create | The number of user acl-rule. |
| INT hwRateLimitIpAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.7 | INTEGER | read-create | The number of Ip acl. |
| INT hwRateLimitIpAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.8 | INTEGER | read-create | The number of Ip acl-rule. |
| INT hwRateLimitLinkAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.9 | INTEGER | read-create | The number of link acl. |
| INT hwRateLimitLinkAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.10 | INTEGER | read-create | The number of link acl-rule. |
| INT hwRateLimitTargetRateMbps | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.11 | INTEGER | read-create | Target rate: Mbps. |
| INT hwRateLimitTargetRateKbps | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.12 | INTEGER | read-create | Target rate: Kbps. |
| INT hwRateLimitPeakRate | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.13 | INTEGER | read-create | Peak rate of the rate-limited port. |
| INT hwRateLimitCIR | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.14 | INTEGER | read-create | CIR of the rate-limited port. |
| INT hwRateLimitCBS | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.15 | INTEGER | read-create | Burst traffic of the rate-limited port. |
| INT hwRateLimitEBS | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.16 | INTEGER | read-create | Excess burst traffic of the rate-limited port. |
| INT hwRateLimitPIR | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.17 | INTEGER | read-create | PIR of the rate-limited port. |
| INT hwRateLimitConformLocalPre | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.18 | INTEGER | read-create | Conform local pre. |
| INT hwRateLimitConformActionType | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.19 | INTEGER | read-create | Conform action type. |
| INT hwRateLimitExceedActionType | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.20 | INTEGER | read-create | Exceed action type. |
| INT hwRateLimitExceedDscp | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.21 | INTEGER | read-create | Exceed DSCP. Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) |
| T/F hwRateLimitRuntime | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.22 | TruthValue | read-only | Runtime. |
| ROW hwRateLimitRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.23 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| INT hwRateLimitExceedCos | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.24 | INTEGER | read-create | Exceeding COS of rate-limited port. |
| INT hwRateLimitConformCos | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.25 | INTEGER | read-create | If the user choose remark-cos value of the hwRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6) |
| INT hwRateLimitConformDscp | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.26 | INTEGER | read-create | If the user choose remark-dscp value of the hwRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) |
| C64 hwRateLimitMeterStatByteCountEx | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.27 | Counter64 | read-only | The counter of conform byte. |
| C64 hwRateLimitMeterStatByteXCount | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.28 | Counter64 | read-only | The counter of exceed byte. |
| INT hwRateLimitMeterStatState | 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.29 | INTEGER | read-create | The status of meter statistic. |
| hwPriorityTable | 1.3.6.1.4.1.2011.2.23.1.16.2.5 | not-accessible | The priority table which contains priority entry. | |
| hwPriorityEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1 | not-accessible | The configuration information of priority. | |
| INT hwPriorityAclIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.1 | INTEGER | read-create | Index of acl rule. |
| INT hwPriorityIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.2 | INTEGER | read-create | ifIndex of the port. |
| INT hwPriorityVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.3 | INTEGER | read-create | Vlan ID. |
| INT hwPriorityDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.4 | INTEGER | read-create | Direction of data stream. |
| INT hwPriorityUserAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.5 | INTEGER | read-create | The number of user acl. |
| INT hwPriorityUserAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.6 | INTEGER | read-create | The subitem of the user acl. |
| INT hwPriorityIpAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.7 | INTEGER | read-create | The number of Ip acl. |
| INT hwPriorityIpAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.8 | INTEGER | read-create | The subitem of the IP acl. |
| INT hwPriorityLinkAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.9 | INTEGER | read-create | The number of Link acl. |
| INT hwPriorityLinkAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.10 | INTEGER | read-create | The subitem of the link acl. |
| INT hwPriorityDscp | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.11 | INTEGER | read-create | Set DSCP Value. Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) |
| INT hwPriorityIpPre | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.12 | INTEGER | read-create | Set Ip precedence. |
| T/F hwPriorityIpPreFromCos | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.13 | TruthValue | read-create | Set Ip precedence according to vlan priority. |
| INT hwPriorityCos | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.14 | INTEGER | read-create | Set vlan priority. |
| T/F hwPriorityCosFromIpPre | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.15 | TruthValue | read-create | Set vlan priority according to IP precedence. |
| INT hwPriorityLocalPre | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.16 | INTEGER | read-create | Set local precedence. |
| INT hwPriorityPolicedServiceType | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.17 | INTEGER | read-create | The service type of proliced Priority. |
| INT hwPriorityPolicedServiceDscp | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.18 | INTEGER | read-create | The service Dscp of proliced Priority. |
| INT hwPriorityPolicedServiceExp | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.19 | INTEGER | read-create | The service Exp of proliced Priority. |
| INT hwPriorityPolicedServiceCos | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.20 | INTEGER | read-create | The service COS of proliced Priority. |
| INT hwPriorityPolicedServiceLoaclPre | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.21 | INTEGER | read-create | The service local pre of proliced Priority. |
| INT hwPriorityPolicedServiceDropPriority | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.22 | INTEGER | read-create | The service drop priority of proliced Priority. |
| T/F hwPriorityRuntime | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.23 | TruthValue | read-only | Is run or not. |
| ROW hwPriorityRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.24 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| hwRedirectTable | 1.3.6.1.4.1.2011.2.23.1.16.2.6 | not-accessible | Redirect table which contains rediect entry. | |
| hwRedirectEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1 | not-accessible | Configuration information of redirection. | |
| INT hwRedirectAclIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.1 | INTEGER | read-create | Index of acl rule. |
| INT hwRedirectIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.2 | INTEGER | read-create | ifIndex of port. |
| INT hwRedirectVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.3 | INTEGER | read-create | Vlan ID. |
| INT hwRedirectDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.4 | INTEGER | read-create | Direction of data stream. |
| INT hwRedirectUserAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.5 | INTEGER | read-create | The number of the user acl. |
| INT hwRedirectUserAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.6 | INTEGER | read-create | The subitem of the user acl. |
| INT hwRedirectIpAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.7 | INTEGER | read-create | The num of the IP acl. |
| INT hwRedirectIpAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.8 | INTEGER | read-create | The subitem of the IP acl. |
| INT hwRedirectLinkAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.9 | INTEGER | read-create | The num of the link acl. |
| INT hwRedirectLinkAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.10 | INTEGER | read-create | The subitem of the link acl. |
| T/F hwRedirectToCpu | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.11 | TruthValue | read-create | Redirect to cpu. |
| INT hwRedirectToIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.12 | INTEGER | read-create | The ifIndex of port to be redirect to. |
| IP hwRedirectToNextHop1 | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.13 | IpAddress | read-create | |
| IP hwRedirectToNextHop2 | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.14 | IpAddress | read-create | |
| T/F hwRedirectRuntime | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.15 | TruthValue | read-only | Is run or not. |
| ROW hwRedirectRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.16 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| INT hwRedirectToSlotNo | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.17 | INTEGER | read-create | The slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary. |
| INT hwRedirectRemarkedDSCP | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.18 | INTEGER | read-create | DSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional. |
| INT hwRedirectRemarkedPri | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.19 | INTEGER | read-create | The priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional. |
| INT hwRedirectRemarkedTos | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.20 | INTEGER | read-create | The TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional. |
| IP hwRedirectToNextHop3 | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.21 | IpAddress | read-create | The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function. |
| INT hwRedirectTargetVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.22 | INTEGER | read-create | The destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set. |
| INT hwRedirectMode | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.23 | INTEGER | read-create | The node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional. |
| I32 hwRedirectToNestedVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.24 | Integer32 | read-create | The nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional. |
| I32 hwRedirectToModifiedVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.25 | Integer32 | read-create | The new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional. |
| hwStatisticTable | 1.3.6.1.4.1.2011.2.23.1.16.2.7 | not-accessible | Statistic table which contains statistic entry. | |
| hwStatisticEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1 | not-accessible | Configuration about statistic information. | |
| INT hwStatisticAclIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.1 | INTEGER | read-create | Index of acl rule. |
| INT hwStatisticIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.2 | INTEGER | read-create | ifIndex of port. |
| INT hwStatisticVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.3 | INTEGER | read-create | Vlan ID. |
| INT hwStatisticDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.4 | INTEGER | read-create | Direction of data stream. |
| INT hwStatisticUserAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.5 | INTEGER | read-create | The number of the user acl. |
| INT hwStatisticUserAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.6 | INTEGER | read-create | The subitem of the user acl. |
| INT hwStatisticIpAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.7 | INTEGER | read-create | The number of the IP acl. |
| INT hwStatisticIpAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.8 | INTEGER | read-create | The subitem of the IP acl. |
| INT hwStatisticLinkAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.9 | INTEGER | read-create | The number of the link acl. |
| INT hwStatisticLinkAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.10 | INTEGER | read-create | The subitem of the link acl. |
| T/F hwStatisticRuntime | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.11 | TruthValue | read-only | Is run or not. |
| C64 hwStatisticPacketCount | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.12 | Counter64 | read-only | The counter of the packets which is matched. |
| C64 hwStatisticByteCount | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.13 | Counter64 | read-only | The counter of the byte which is matched. |
| INT hwStatisticCountClear | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.14 | INTEGER | read-write | Clear the counter of the packets. |
| ROW hwStatisticRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.15 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| C64 hwStatisticPacketXCount | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.16 | Counter64 | read-only | The counter of the outprofile packets. |
| C64 hwStatisticByteXCount | 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.17 | Counter64 | read-only | The counter of the outprofile bytes. |
| hwMirrorTable | 1.3.6.1.4.1.2011.2.23.1.16.2.8 | not-accessible | Mirror table which contains mirror entry. | |
| hwMirrorEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1 | not-accessible | Configuration information to be mirrored. | |
| INT hwMirrorAclIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.1 | INTEGER | read-create | Index of acl rule. |
| INT hwMirrorIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.2 | INTEGER | read-create | ifIndex of port. |
| INT hwMirrorVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.3 | INTEGER | read-create | Vlan ID. |
| INT hwMirrorDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.4 | INTEGER | read-create | Direction of data stream. |
| INT hwMirrorUserAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.5 | INTEGER | read-create | The number of the user acl. |
| INT hwMirrorUserAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.6 | INTEGER | read-create | The subitem of the user acl. |
| INT hwMirrorIpAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.7 | INTEGER | read-create | The subitem of the user acl. |
| INT hwMirrorIpAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.8 | INTEGER | read-create | The subitem of the IP acl. |
| INT hwMirrorLinkAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.9 | INTEGER | read-create | The number of the link acl. |
| INT hwMirrorLinkAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.10 | INTEGER | read-create | The subitem of the link acl. |
| INT hwMirrorToIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.11 | INTEGER | read-create | The ifIndex of port that to be mirrored to. |
| T/F hwMirrorToCpu | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.12 | TruthValue | read-create | Mirror to cpu. |
| T/F hwMirrorRuntime | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.13 | TruthValue | read-only | Is run or not. |
| ROW hwMirrorRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.14 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| I32 hwMirrorToGroup | 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.15 | Integer32 | read-create | The destination of stream-based mirroring is the mirroring group. |
| hwPortMirrorTable | 1.3.6.1.4.1.2011.2.23.1.16.2.9 | not-accessible | Port Mirror. | |
| hwPortMirrorEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.9.1 | not-accessible | Configuration information of port mirroring. | |
| INT hwPortMirrorIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.9.1.1 | INTEGER | read-create | The ifIndex of mirror port. |
| INT hwPortMirrorDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.9.1.2 | INTEGER | read-create | The direction of mirror port. |
| ROW hwPortMirrorRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.9.1.3 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| hwLineRateTable | 1.3.6.1.4.1.2011.2.23.1.16.2.10 | not-accessible | Line Rate. | |
| hwLineRateEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.10.1 | not-accessible | Configuration information of line-rate port. | |
| INT hwLineRateIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.10.1.1 | INTEGER | read-create | The ifIndex of port of line rate. |
| INT hwLineRateDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.10.1.2 | INTEGER | read-create | The direction of line rate. |
| INT hwLineRateValue | 1.3.6.1.4.1.2011.2.23.1.16.2.10.1.3 | INTEGER | read-create | The value of the line-rate. |
| ROW hwLineRateRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.10.1.4 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| hwBandwidthTable | 1.3.6.1.4.1.2011.2.23.1.16.2.11 | not-accessible | Bandwidth. | |
| hwBandwidthEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1 | not-accessible | Configuration information of bandwidth of port. | |
| INT hwBandwidthAclIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.1 | INTEGER | read-create | Index of acl rule. |
| INT hwBandwidthIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.2 | INTEGER | read-create | ifIndex of port. |
| INT hwBandwidthVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.3 | INTEGER | read-create | Vlan ID. |
| INT hwBandwidthDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.4 | INTEGER | read-create | Direction of data stream. |
| INT hwBandwidthIpAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.5 | INTEGER | read-create | The number of Ip acl. |
| INT hwBandwidthIpAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.6 | INTEGER | read-create | The subitem of ip acl. |
| INT hwBandwidthLinkAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.7 | INTEGER | read-create | The number of link acl. |
| INT hwBandwidthLinkAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.8 | INTEGER | read-create | The subitem of link acl. |
| INT hwBandwidthMinGuaranteedWidth | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.9 | INTEGER | read-write | The min width which is guaranteed. |
| INT hwBandwidthMaxGuaranteedWidth | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.10 | INTEGER | read-write | The max width which is guaranteed. |
| INT hwBandwidthWeight | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.11 | INTEGER | read-write | Weight of bandwidth. |
| T/F hwBandwidthRuntime | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.12 | TruthValue | read-only | Is run or not. |
| ROW hwBandwidthRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.13 | RowStatus | read-write | RowStatus, now support three status: createAndGo, active, destroy. |
| hwRedTable | 1.3.6.1.4.1.2011.2.23.1.16.2.12 | not-accessible | Red table which contains RED entry. | |
| hwRedEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1 | not-accessible | Configuration information of RED. | |
| INT hwRedAclIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.1 | INTEGER | read-create | Index of acl rule. |
| INT hwRedIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.2 | INTEGER | read-create | ifIndex of port. |
| INT hwRedVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.3 | INTEGER | read-create | Vlan ID. |
| INT hwRedDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.4 | INTEGER | read-create | Direction of data stream. |
| INT hwRedIpAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.5 | INTEGER | read-create | The num of Ip acl. |
| INT hwRedIpAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.6 | INTEGER | read-create | The subitem of Ip acl. |
| INT hwRedLinkAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.7 | INTEGER | read-create | The number of link acl. |
| INT hwRedLinkAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.8 | INTEGER | read-create | The subitem of link acl. |
| INT hwRedStartQueueLen | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.9 | INTEGER | read-write | The length of Starting queue. |
| INT hwRedStopQueueLen | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.10 | INTEGER | read-write | The length of stopping queue. |
| INT hwRedProbability | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.11 | INTEGER | read-write | Probability. |
| T/F hwRedRuntime | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.12 | TruthValue | read-only | Is run or not. |
| ROW hwRedRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.13 | RowStatus | read-write | RowStatus, now support three status: createAndGo, active, destroy. |
| hwMirrorGroupTable | 1.3.6.1.4.1.2011.2.23.1.16.2.13 | not-accessible | Mirror Group. | |
| hwMirrorGroupEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.13.1 | not-accessible | Configuration information of mirroring group. | |
| INT hwMirrorGroupID | 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.1 | INTEGER | read-only | Group ID of mirroring group. |
| INT hwMirrorGroupDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.2 | INTEGER | read-write | Direction of data stream which would be mirrored. |
| OCT hwMirrorGroupMirrorIfIndexList | 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.3 | OCTET STRING | read-write | ifIndex list of source port. |
| INT hwMirrorGroupMonitorIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.4 | INTEGER | read-write | ifIndex of destination port. |
| ROW hwMirrorGroupRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.5 | RowStatus | read-write | RowStatus, now support three status: createAndGo, active, destroy. |
| hwFlowtempTable | 1.3.6.1.4.1.2011.2.23.1.16.2.14 | not-accessible | Flow-template table which contains flow-template entry. | |
| hwFlowtempEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1 | not-accessible | Configuration information of flow-template. | |
| INT hwFlowtempIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.1 | INTEGER | read-only | Index of flow template. |
| T/F hwFlowtempIpProtocol | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.2 | TruthValue | read-create | protocol-type of IP packet. |
| T/F hwFlowtempTcpFlag | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.3 | TruthValue | read-create | The flag of Tcp paceket. |
| T/F hwFlowtempSPort | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.4 | TruthValue | read-create | The port of source. |
| T/F hwFlowtempDPort | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.5 | TruthValue | read-create | The port of destination. |
| T/F hwFlowtempIcmpType | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.6 | TruthValue | read-create | The type of Icmp. |
| T/F hwFlowtempIcmpCode | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.7 | TruthValue | read-create | The code of Icmp. |
| T/F hwFlowtempFragment | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.8 | TruthValue | read-create | The flag of Fragment. |
| T/F hwFlowtempDscp | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.9 | TruthValue | read-create | Dscp of IP packet. |
| T/F hwFlowtempIpPre | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.10 | TruthValue | read-create | The Precedence of Ip packet. |
| T/F hwFlowtempTos | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.11 | TruthValue | read-create | Tos of IP packet. |
| T/F hwFlowtempSIp | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.12 | TruthValue | read-create | The Ip of source. |
| IP hwFlowtempSIpMask | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.13 | IpAddress | read-create | The mask of source-Ip. |
| T/F hwFlowtempDIp | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.14 | TruthValue | read-create | The Ip of destination. |
| IP hwFlowtempDIpMask | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.15 | IpAddress | read-create | The mask of destination-Ip. |
| T/F hwFlowtempEthProtocol | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.16 | TruthValue | read-create | Protocol type of Ethernet. |
| T/F hwFlowtempSMac | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.17 | TruthValue | read-create | The Mac of source. |
| MAC hwFlowtempSMacMask | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.18 | MacAddress | read-create | The mask of source-Mac. |
| T/F hwFlowtempDMac | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.19 | TruthValue | read-create | The mac of destination. |
| MAC hwFlowtempDMacMask | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.20 | MacAddress | read-create | The mask of destination-Mac. |
| T/F hwFlowtempVpn | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.21 | TruthValue | read-create | Vpn |
| ROW hwFlowtempRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.22 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| T/F hwFlowtempVlanId | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.23 | TruthValue | read-create | Source VLAN ID. |
| T/F hwFlowtempCos | 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.24 | TruthValue | read-create | 802.1P priority. |
| hwFlowtempEnableTable | 1.3.6.1.4.1.2011.2.23.1.16.2.15 | not-accessible | The table of flow-template. | |
| hwFlowtempEnableEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.15.1 | not-accessible | Enable entry of flow-template. | |
| INT hwFlowtempEnableIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.15.1.1 | INTEGER | read-create | ifIndex of port. |
| INT hwFlowtempEnableVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.15.1.2 | INTEGER | read-create | Vlan ID. |
| INT hwFlowtempEnableFlowtempIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.15.1.3 | INTEGER | read-write | The index of Flowtemp table. |
| hwTrafficShapeTable | 1.3.6.1.4.1.2011.2.23.1.16.2.16 | not-accessible | The traffic-shape table which contains traffic-shape entry. | |
| hwTrafficShapeEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.16.1 | not-accessible | Configuration information of traffic-shape. | |
| INT hwTrafficShapeIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.1 | INTEGER | read-create | IfIdex of port. |
| INT hwTrafficShapeQueueId | 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.2 | INTEGER | read-create | ID of queue which would be shaped. |
| INT hwTrafficShapeMaxRate | 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.3 | INTEGER | read-create | The max rate. |
| INT hwTrafficShapeBurstSize | 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.4 | INTEGER | read-create | The size of burst. |
| INT hwTrafficShapeBufferLimit | 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.5 | INTEGER | read-create | The limit of buffer. |
| ROW hwTrafficShapeRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.6 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| hwPortQueueTable | 1.3.6.1.4.1.2011.2.23.1.16.2.17 | not-accessible | The port-queue table which contains port-queue entry. | |
| hwPortQueueEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.17.1 | not-accessible | Configuration information of port-queue. | |
| INT hwPortQueueIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.17.1.1 | INTEGER | read-only | ifIndex of port. |
| INT hwPortQueueQueueID | 1.3.6.1.4.1.2011.2.23.1.16.2.17.1.2 | INTEGER | read-only | ID of port-queue. |
| INT hwPortQueueWrrPriority | 1.3.6.1.4.1.2011.2.23.1.16.2.17.1.3 | INTEGER | read-write | The priority of Wrr. |
| INT hwPortQueueWeight | 1.3.6.1.4.1.2011.2.23.1.16.2.17.1.4 | INTEGER | read-write | The weight of this queue. |
| hwDropModeTable | 1.3.6.1.4.1.2011.2.23.1.16.2.18 | not-accessible | The drop-mode table which contains drop-mode entry. | |
| hwDropModeEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.18.1 | not-accessible | Configuration information of the drop-mode. | |
| INT hwDropModeIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.18.1.1 | INTEGER | read-only | ifIndex of port. |
| INT hwDropModeMode | 1.3.6.1.4.1.2011.2.23.1.16.2.18.1.2 | INTEGER | read-write | Mode. |
| INT hwDropModeWredIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.18.1.3 | INTEGER | read-write | The index of Wred table. |
| hwWredTable | 1.3.6.1.4.1.2011.2.23.1.16.2.19 | not-accessible | The Wred table which contains wred Entry. | |
| hwWredEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1 | not-accessible | Configuration information of Wred. | |
| INT hwWredIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.1 | INTEGER | read-only | Index of wred. |
| INT hwWredQueueId | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.2 | INTEGER | read-only | Queue ID. |
| INT hwWredGreenMinThreshold | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.3 | INTEGER | read-write | The min threshold of Green. |
| INT hwWredGreenMaxThreshold | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.4 | INTEGER | read-write | The max threshold of Greem. |
| INT hwWredGreenMaxProb | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.5 | INTEGER | read-write | The max prob of Green. |
| INT hwWredYellowMinThreshold | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.6 | INTEGER | read-write | The min threshold of Yellow. |
| INT hwWredYellowMaxThreshold | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.7 | INTEGER | read-write | The max threshold of Yellow. |
| INT hwWredYellowMaxProb | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.8 | INTEGER | read-write | The Prob threshold of Yellow. |
| INT hwWredRedMinThreshold | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.9 | INTEGER | read-write | The min threshold of Red. |
| INT hwWredRedMaxThreshold | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.10 | INTEGER | read-write | The max threshold of Red. |
| INT hwWredRedMaxProb | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.11 | INTEGER | read-write | The max prob of Red. |
| INT hwWredExponent | 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.12 | INTEGER | read-write | Exponent. |
| hwCosToLocalPrecedenceMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.20 | not-accessible | Table of map of the COS to local-precedence. | |
| hwCosToLocalPrecedenceMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.20.1 | not-accessible | Configuration information of map of the COS to local precedence. | |
| INT hwCosToLocalPrecedenceMapCosIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.20.1.1 | INTEGER | read-only | Index of the map. |
| INT hwCosToLocalPrecedenceMapLocalPrecedenceValue | 1.3.6.1.4.1.2011.2.23.1.16.2.20.1.2 | INTEGER | read-write | Value of local precedence. |
| hwCosToDropPrecedenceMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.21 | not-accessible | The table of map of COS to drop-precedence. | |
| hwCosToDropPrecedenceMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.21.1 | not-accessible | Configuration information of the map of the COS to drop-precedence. | |
| INT hwCosToDropPrecedenceMapCosIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.21.1.1 | INTEGER | read-only | Index of the map. |
| INT hwCosToDropPrecedenceMapDropPrecedenceValue | 1.3.6.1.4.1.2011.2.23.1.16.2.21.1.2 | INTEGER | read-write | Value of drop-precedence. |
| hwDscpMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.22 | not-accessible | Table of dscp map. | |
| hwDscpMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.22.1 | not-accessible | Configuration information of Dscp map. | |
| INT hwDscpMapConformLevel | 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.1 | INTEGER | read-only | Conformable level of Dscp-map. |
| INT hwDscpMapDscpIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.2 | INTEGER | read-only | Index of dscp. |
| INT hwDscpMapDscpValue | 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.3 | INTEGER | read-write | Value of Dscp. |
| INT hwDscpMapExpValue | 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.4 | INTEGER | read-write | Exp value. |
| INT hwDscpMapCosValue | 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.5 | INTEGER | read-write | COS value. |
| INT hwDscpMapLocalPrecedence | 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.6 | INTEGER | read-write | The precedence of local. |
| INT hwDscpMapDropPrecedence | 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.7 | INTEGER | read-write | The precedence of Drop. |
| hwExpMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.23 | not-accessible | The table of Exp-map | |
| hwExpMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.23.1 | not-accessible | Configuration information of Exp-map. | |
| INT hwExpMapConformLevel | 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.1 | INTEGER | read-only | Conformable level of Exp-map. |
| INT hwExpMapExpIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.2 | INTEGER | read-only | Index of Exp. |
| INT hwExpMapDscpValue | 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.3 | INTEGER | read-write | Dscp value. |
| INT hwExpMapExpValue | 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.4 | INTEGER | read-write | Exp value. |
| INT hwExpMapCosValue | 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.5 | INTEGER | read-write | COS Value. |
| INT hwExpMapLocalPrecedence | 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.6 | INTEGER | read-write | The precedence of local. |
| INT hwExpMapDropPrecedence | 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.7 | INTEGER | read-write | The precedence of Drop. |
| hwLocalPrecedenceMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.24 | not-accessible | The table of local-precedence map. | |
| hwLocalPrecedenceMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.24.1 | not-accessible | Configuraion information of local-precedence map. | |
| INT hwLocalPrecedenceMapConformLevel | 1.3.6.1.4.1.2011.2.23.1.16.2.24.1.1 | INTEGER | read-only | Conformable level of local-precedence map. |
| INT hwLocalPrecedenceMapLocalPrecedenceIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.24.1.2 | INTEGER | read-write | Index of local-precedence. |
| INT hwLocalPrecedenceMapCosValue | 1.3.6.1.4.1.2011.2.23.1.16.2.24.1.3 | INTEGER | read-write | COS value. |
| hwPortWredTable | 1.3.6.1.4.1.2011.2.23.1.16.2.25 | not-accessible | The table of PortWred. | |
| hwPortWredEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.25.1 | not-accessible | Configuration information of port Wred. | |
| INT hwPortWredIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.25.1.1 | INTEGER | read-only | ifIndex of port. |
| INT hwPortWredQueueID | 1.3.6.1.4.1.2011.2.23.1.16.2.25.1.2 | INTEGER | read-only | ID of port-Wred queue. |
| INT hwPortWredQueueStartLength | 1.3.6.1.4.1.2011.2.23.1.16.2.25.1.3 | INTEGER | read-write | Queue length. |
| INT hwPortWredQueueProbability | 1.3.6.1.4.1.2011.2.23.1.16.2.25.1.4 | INTEGER | read-write | Probability. |
| hwMirroringGroupTable | 1.3.6.1.4.1.2011.2.23.1.16.2.26 | not-accessible | The table of MirrorGroup. | |
| hwMirroringGroupEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.26.1 | not-accessible | Configuration information of MirrorGroup. | |
| INT hwMirroringGroupID | 1.3.6.1.4.1.2011.2.23.1.16.2.26.1.1 | INTEGER | not-accessible | GroupID. |
| INT hwMirroringGroupType | 1.3.6.1.4.1.2011.2.23.1.16.2.26.1.2 | INTEGER | read-create | GroupType. |
| INT hwMirroringGroupStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.26.1.3 | INTEGER | read-only | MirroringGroup status. |
| ROW hwMirroringGroupRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.26.1.4 | RowStatus | read-create | RowStatus, Now support three status: createAndGo, active, destroy. |
| hwMirroringGroupMirrorTable | 1.3.6.1.4.1.2011.2.23.1.16.2.27 | not-accessible | MirroringGroup mirroring-port information. | |
| hwMirroringGroupMirrorEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.27.1 | not-accessible | MirroringGroup mirroring-port information. | |
| OCT hwMirroringGroupMirrorInboundIfIndexList | 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.1 | OCTET STRING | read-create | Inbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList. Example A: hwMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hwMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hwMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hwMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hwMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the mirror source is board, the meaning reference the object HwMirrorOrMonitorType), then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007' indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hwMirroringGroupID separately, the result of get operation for that entry will be like the example A above. If hwMirroringGroupMirrorInTypeList is not supported, the first four octets of hwMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hwMirroringGroupMirrorOutboundIfIndexList and hwMirroringGroupMirrorOutTypeList are a pair and have the same relations like hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList pair. |
| OCT hwMirroringGroupMirrorOutboundIfIndexList | 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.2 | OCTET STRING | read-create | Outbound-Mirror ifIndex and slot number list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList. |
| ROW hwMirroringGroupMirrorRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.3 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| OCT hwMirroringGroupMirrorInTypeList | 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.4 | OCTET STRING | read-create | Inbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList. |
| OCT hwMirroringGroupMirrorOutTypeList | 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.5 | OCTET STRING | read-create | Outbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList. |
| hwMirroringGroupMonitorTable | 1.3.6.1.4.1.2011.2.23.1.16.2.28 | not-accessible | MirroringGroup monitor-port information. | |
| hwMirroringGroupMonitorEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.28.1 | not-accessible | MirroringGroup monitor-port information. | |
| INT hwMirroringGroupMonitorIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.28.1.1 | INTEGER | read-create | If the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hwMirroringGroupMonitorType. |
| ROW hwMirroringGroupMonitorRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.28.1.2 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| HWM hwMirroringGroupMonitorType | 1.3.6.1.4.1.2011.2.23.1.16.2.28.1.3 | HwMirrorOrMonitorType | read-create | Specify whether the monitor destination is port or board. If this object is not supported, then the value of hwMirroringGroupMonitorIfIndex means ifIndex. |
| hwMirroringGroupReflectorTable | 1.3.6.1.4.1.2011.2.23.1.16.2.29 | not-accessible | MirroringGroup reflector-port information. | |
| hwMirroringGroupReflectorEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.29.1 | not-accessible | MirroringGroup reflector-port information. | |
| INT hwMirroringGroupReflectorIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.29.1.1 | INTEGER | read-create | Only valid for remote-source MirroringGroup. |
| ROW hwMirroringGroupReflectorRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.29.1.2 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| hwMirroringGroupRprobeVlanTable | 1.3.6.1.4.1.2011.2.23.1.16.2.30 | not-accessible | MirroringGroup rprobe-vlan information. | |
| hwMirroringGroupRprobeVlanEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.30.1 | not-accessible | MirroringGroup rprobe-vlan information. | |
| INT hwMirroringGroupRprobeVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.30.1.1 | INTEGER | read-create | Remote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup. |
| ROW hwMirroringGroupRprobeVlanRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.30.1.2 | RowStatus | read-create | RowStatus, now support three status: createAndGo, active, destroy. |
| hwMirroringGroupMirrorMacTable | 1.3.6.1.4.1.2011.2.23.1.16.2.31 | not-accessible | MirroringGroup MAC information. | |
| hwMirroringGroupMirrorMacEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.31.1 | not-accessible | MirroringGroup MAC information. | |
| I32 hwMirroringGroupMirrorMacSeq | 1.3.6.1.4.1.2011.2.23.1.16.2.31.1.1 | Integer32 | not-accessible | The sequence MAC number of the same group. |
| MAC hwMirroringGroupMirrorMac | 1.3.6.1.4.1.2011.2.23.1.16.2.31.1.2 | MacAddress | read-create | The MAC address of the MirroringGroup. |
| I32 hwMirrorMacVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.31.1.3 | Integer32 | read-create | The vlan ID of MAC address . |
| ROW hwMirroringGroupMirroMacStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.31.1.4 | RowStatus | read-create | The status of this conceptual row. |
| hwMirroringGroupMirrorVlanTable | 1.3.6.1.4.1.2011.2.23.1.16.2.32 | not-accessible | MirroringGroup Vlan Information. | |
| hwMirroringGroupMirrorVlanEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.32.1 | not-accessible | MirroringGroup Vlan Information. | |
| I32 hwMirroringGroupMirrorVlanSeq | 1.3.6.1.4.1.2011.2.23.1.16.2.32.1.1 | Integer32 | not-accessible | The sequence vlan number of the same group. |
| I32 hwMirroringGroupMirrorVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.32.1.2 | Integer32 | read-create | The vlan ID of MirroringGroup. |
| INT hwMirroringGroupMirrorVlanDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.32.1.3 | INTEGER | read-create | The vlan direction of MirroringGroup. |
| ROW hwMirroringGroupMirroVlanStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.32.1.4 | RowStatus | read-create | The status of this conceptual row. |
| hwPortTrustTable | 1.3.6.1.4.1.2011.2.23.1.16.2.33 | not-accessible | Port trust information. | |
| hwPortTrustEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.33.1 | not-accessible | Port trust information. | |
| I32 hwPortTrustIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.33.1.1 | Integer32 | not-accessible | ifIndex of the port which port trust is configured. |
| INT hwPortTrustTrustType | 1.3.6.1.4.1.2011.2.23.1.16.2.33.1.2 | INTEGER | read-write | Trust type of port trust. |
| INT hwPortTrustOvercastType | 1.3.6.1.4.1.2011.2.23.1.16.2.33.1.3 | INTEGER | read-write | Overcast type of port trust. |
| INT hwPortTrustReset | 1.3.6.1.4.1.2011.2.23.1.16.2.33.1.4 | INTEGER | read-write | This object is used to reset port trust to default value. Read operation is meaningless. |
| hwRemarkVlanIDTable | 1.3.6.1.4.1.2011.2.23.1.16.2.34 | not-accessible | Remark vlan ID information. | |
| hwRemarkVlanIDEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1 | not-accessible | Remark vlan ID information. | |
| I32 hwRemarkVlanIDAclIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.1 | Integer32 | not-accessible | Action identifier, acl index. |
| I32 hwRemarkVlanIDIfIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.2 | Integer32 | not-accessible | Action identifier, ifIndex. |
| I32 hwRemarkVlanIDVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.3 | Integer32 | not-accessible | Action identifier, vlan ID. |
| INT hwRemarkVlanIDDirection | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.4 | INTEGER | not-accessible | Action identifier, direction of data stream. |
| I32 hwRemarkVlanIDUserAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.5 | Integer32 | read-create | The number of the user acl. |
| I32 hwRemarkVlanIDUserAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.6 | Integer32 | read-create | The subitem of the user acl. |
| I32 hwRemarkVlanIDIpAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.7 | Integer32 | read-create | The num of the IP acl. |
| I32 hwRemarkVlanIDIpAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.8 | Integer32 | read-create | The subitem of the IP acl. |
| I32 hwRemarkVlanIDLinkAclNum | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.9 | Integer32 | read-create | The num of the link acl. |
| I32 hwRemarkVlanIDLinkAclRule | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.10 | Integer32 | read-create | The subitem of the link acl. |
| I32 hwRemarkVlanIDRemarkVlanID | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.11 | Integer32 | read-create | Remark vlan ID. |
| INT hwRemarkVlanIDPacketType | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.12 | INTEGER | read-create | Packet type of the remarked vlan ID. |
| ROW hwRemarkVlanIDRowStatus | 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.13 | RowStatus | read-create | The status of this conceptual row. |
| hwCosToDscpMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.35 | not-accessible | COS to DSCP map information. | |
| hwCosToDscpMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.35.1 | not-accessible | COS to DSCP map information. | |
| I32 hwCosToDscpMapCosIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.35.1.1 | Integer32 | not-accessible | COS index of COS to DSCP map. |
| I32 hwCosToDscpMapDscpValue | 1.3.6.1.4.1.2011.2.23.1.16.2.35.1.2 | Integer32 | read-write | DSCP value of COS to DSCP map. |
| INT hwCosToDscpMapReSet | 1.3.6.1.4.1.2011.2.23.1.16.2.35.1.3 | INTEGER | read-write | This object is used to reset COS to DSCP map to default value. Read operation is meaningless. |
| hwDscpToLocalPreMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.36 | not-accessible | DSCP to Local-precedence map information. | |
| hwDscpToLocalPreMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.36.1 | not-accessible | DSCP to Local-precedence map information. | |
| I32 hwDscpToLocalPreMapDscpIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.36.1.1 | Integer32 | not-accessible | DSCP Index of DSCP to Local-precedence map. |
| I32 hwDscpToLocalPreMapLocalPreVal | 1.3.6.1.4.1.2011.2.23.1.16.2.36.1.2 | Integer32 | read-write | Local-precedence value of DSCP to Local-precedence map. |
| INT hwDscpToLocalPreMapReset | 1.3.6.1.4.1.2011.2.23.1.16.2.36.1.3 | INTEGER | read-write | This object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless. |
| hwDscpToDropPreMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.37 | not-accessible | DSCP to Drop-precedence map information. | |
| hwDscpToDropPreMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.37.1 | not-accessible | DSCP to Drop-precedence map information. | |
| I32 hwDscpToDropPreMapDscpIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.37.1.1 | Integer32 | not-accessible | DSCP Index of DSCP to Drop-precedence map. |
| I32 hwDscpToDropPreMapDropPreVal | 1.3.6.1.4.1.2011.2.23.1.16.2.37.1.2 | Integer32 | read-write | Drop-precedence value of DSCP to Drop-precedence map. |
| INT hwDscpToDropPreMapReset | 1.3.6.1.4.1.2011.2.23.1.16.2.37.1.3 | INTEGER | read-write | This object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless. |
| hwDscpToCosMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.38 | not-accessible | DSCP to COS map information. | |
| hwDscpToCosMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.38.1 | not-accessible | DSCP to COS map information. | |
| I32 hwDscpToCosMapDscpIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.38.1.1 | Integer32 | not-accessible | DSCP index of DSCP to COS map. |
| I32 hwDscpToCosMapCosValue | 1.3.6.1.4.1.2011.2.23.1.16.2.38.1.2 | Integer32 | read-write | COS value of DSCP to COS map. |
| INT hwDscpToCosMapReset | 1.3.6.1.4.1.2011.2.23.1.16.2.38.1.3 | INTEGER | read-write | This object is used to reset DSCP to COS map to default value. Read operation is meaningless. |
| hwDscpToDscpMapTable | 1.3.6.1.4.1.2011.2.23.1.16.2.39 | not-accessible | DSCP to DSCP map information. | |
| hwDscpToDscpMapEntry | 1.3.6.1.4.1.2011.2.23.1.16.2.39.1 | not-accessible | DSCP to DSCP map information. | |
| I32 hwDscpToDscpMapDscpIndex | 1.3.6.1.4.1.2011.2.23.1.16.2.39.1.1 | Integer32 | not-accessible | DSCP index of DSCP to DSCP map. |
| I32 hwDscpToDscpMapDscpValue | 1.3.6.1.4.1.2011.2.23.1.16.2.39.1.2 | Integer32 | read-write | DSCP value of DSCP to DSCP map. |
| INT hwDscpToDscpMapReset | 1.3.6.1.4.1.2011.2.23.1.16.2.39.1.3 | INTEGER | read-write | This object is used to reset DSCP to DSCP map to default value. Read operation is meaningless. |
RFC description
Quality of Service configuration and monitoring for Huawei LAN switches.
Start monitoring Huawei enterprise LAN switch (QoS/ACL classification, queuing, mirroring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.