HUAWEI-HGMP-MIB

All MIBs › HUAWEI-HGMP-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2015-04-11

Category: Technology: Stacking, Technology: Switching/L2, Vendor: Huawei

Description: Huawei HGMP (Huawei Group Management Protocol) MIB for managing stacked switch groups, cluster topology, and group member configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-HGMP-MIB?

HUAWEI-HGMP-MIB implements Huawei's Group Management Protocol suite, covering switch clustering, physical stacking, Neighbor Discovery Protocol (NDP), and Network Topology Discovery Protocol (NTDP). It exposes membership, role, and topology data for groups of switches managed as a single logical unit, placing it in the configuration and device-discovery/status category. Monitoring it is about the software/control-plane health of a switch group: confirming each cluster or stack member's join status and role, and that neighbor and topology discovery tables reflect all expected devices, so a member that has silently dropped out can be caught quickly. It is a proprietary Huawei protocol suite with no direct dependency on IETF standards, conceptually similar in purpose to vendor discovery protocols like CDP. It is deployed on stackable or clusterable Huawei switches in campus and enterprise network deployments. Engineers can download the HUAWEI-HGMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-HGMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei stackable/clusterable switches

Monitoring Examples

An administrator managing a cluster of Huawei switches would poll the cluster/stack member tables for each unit's join status and role and the NDP/NTDP neighbor and topology tables to confirm all expected devices are still discovered, catching a member that has dropped out of the stack or cluster.

What Can Be Monitored

cluster member status/role
stack member health
neighbor discovery (NDP) table
network topology (NTDP) table

Imported Objects

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwCluster	1.3.6.1.4.1.2011.6.7			HUAWEI-HGMP-MIB is defined and owned by Huawei. This MIB includes four parts: the cluster, stack, Neighbor Discovery Protocol (NDP), and Network Topology Discovery Protocol (NTDP). This MIB can monitor the cluster, stack and topology collection.
hwClusterObject	1.3.6.1.4.1.2011.6.7.1
hgmpEventsV2	1.3.6.1.4.1.2011.6.7.1.0
NTF hgmpMemberfailure	1.3.6.1.4.1.2011.6.7.1.0.1			When a cluster member failed, send an SNMP trap to the network manager.
NTF hgmpMemberRecover	1.3.6.1.4.1.2011.6.7.1.0.2			When a cluster member recovered, send an SNMP trap to the network manager.
NTF hgmpMemberStatusChange	1.3.6.1.4.1.2011.6.7.1.0.3			When a cluster member status changed, send an SNMP trap to the network manager.
NTF hgmpNetTopChange	1.3.6.1.4.1.2011.6.7.1.0.4			When net topology of this cluster change, send a snmp trap to the network management.
NTF hgmpMemberAdd	1.3.6.1.4.1.2011.6.7.1.0.6			When a cluster member added, send an SNMP trap to the network manager.
INT hgmpSetVLANSecurity	1.3.6.1.4.1.2011.6.7.1.1	INTEGER	read-write	Configure whether to perform the VLAN check inside the cluster. The default value is noSecurity(0).
I32 hgmpHandShakeInterval	1.3.6.1.4.1.2011.6.7.1.2	Integer32	read-write	Handshaking interval of the cluster member switches. The default value is 10.
I32 hgmpHandShakeHoldtime	1.3.6.1.4.1.2011.6.7.1.3	Integer32	read-write	Holdtime of command switch and member switch in the cluster. The default value is 60.
I32 hgmpGrpMemberTableChange	1.3.6.1.4.1.2011.6.7.1.4	Integer32	read-only	Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, it will not read the list once more. The default value is 0.
I32 hgmpMemberDisconRate	1.3.6.1.4.1.2011.6.7.1.5	Integer32	read-only	Disconnection times of the member and command switches divided by member number times 1000. The default value is 0.
INT hgmpCmdLanswitchFlag	1.3.6.1.4.1.2011.6.7.1.6	INTEGER	read-write	Command switch flag. The default value is false(0). If the value is set to 1, the cluster name is 'huawei' by default.
OCT hgmpCmdClusterName	1.3.6.1.4.1.2011.6.7.1.7	OCTET STRING	read-write	Cluster name of the command switch.
IP hgmpMngPriIpSegCMIP	1.3.6.1.4.1.2011.6.7.1.8	IpAddress	read-write	The private management IP address of the command switch, which cannot be modified after the cluster has been created. The default value is '0.0.0.0'.
IP hgmpMngPriIpMask	1.3.6.1.4.1.2011.6.7.1.9	IpAddress	read-write	The private management IP address mask assigned by the command switch, which cannot be modified after the cluster has been created. The default value is '0.0.0.0'.
IP hgmpFtpServer	1.3.6.1.4.1.2011.6.7.1.10	IpAddress	read-write	The cluster members can access the FTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
IP hgmpTftpServer	1.3.6.1.4.1.2011.6.7.1.11	IpAddress	read-write	The cluster members can access the TFTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
IP hgmpSnmpHost	1.3.6.1.4.1.2011.6.7.1.12	IpAddress	read-write	The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
IP hgmpLogHost	1.3.6.1.4.1.2011.6.7.1.13	IpAddress	read-write	Log host of the cluster, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
hgmpGrpMemberTable	1.3.6.1.4.1.2011.6.7.1.14		not-accessible	Table of cluster member switches.
hgmpGrpMemberEntry	1.3.6.1.4.1.2011.6.7.1.14.1		not-accessible	Provides information about cluster member entry.
OCT hgmpGrpMemberDeviceId	1.3.6.1.4.1.2011.6.7.1.14.1.1	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of hexadecimal numbers.
I32 hgmpGrpMemberSerial	1.3.6.1.4.1.2011.6.7.1.14.1.2	Integer32	read-only	When adding member switch to the cluster, the command switch will assign an unique integer to identify it.
IP hgmpGrpMemberIpAddr	1.3.6.1.4.1.2011.6.7.1.14.1.3	IpAddress	read-only	The private IP addresses of the member switches for communication inside the cluster.
OCT hgmpGrpMemberName	1.3.6.1.4.1.2011.6.7.1.14.1.4	OCTET STRING	read-only	Hostname of the member switch.
OCT hgmpGrpMemberPassword	1.3.6.1.4.1.2011.6.7.1.14.1.5	OCTET STRING	read-write	Member password for joining a cluster.
OCT hgmpGrpMemberPlatform	1.3.6.1.4.1.2011.6.7.1.14.1.6	OCTET STRING	read-only	Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
INT hgmpGrpMemberStatus	1.3.6.1.4.1.2011.6.7.1.14.1.7	INTEGER	read-only	Member status on the command switch, used for displaying the network management status.
I32 hgmpGrpMemberDisconCount	1.3.6.1.4.1.2011.6.7.1.14.1.8	Integer32	read-only	Count of inside communication disconnections between the member switch and the command switch.
I32 hgmpGrpMemberEnrollTime	1.3.6.1.4.1.2011.6.7.1.14.1.9	Integer32	read-only	Enrollment time of the member, measured in seconds.
ROW hgmpGrpMemberOperate	1.3.6.1.4.1.2011.6.7.1.14.1.10	RowStatus	read-write	Operation indication field, indicating the operation of adding/removing a member by the network management agent and the status of current line.
hgmpMemberResetTable	1.3.6.1.4.1.2011.6.7.1.15		not-accessible	Reset a member switch in the cluster.
hgmpMemberResetEntry	1.3.6.1.4.1.2011.6.7.1.15.1		not-accessible	Provides information about resetting member entry.
MAC hgmpMemberResetMAC	1.3.6.1.4.1.2011.6.7.1.15.1.1	MacAddress	read-only	The management MAC address of the switch to be reset, which is the unique identifier of the switch.
INT hgmpMemberEraseflash	1.3.6.1.4.1.2011.6.7.1.15.1.2	INTEGER	read-write	Whether to erase the configuration file from the flash after resetting a switch. When this node is read, cannotget(65535) will be returned.
INT hgmpClusterRole	1.3.6.1.4.1.2011.6.7.1.16	INTEGER	read-only	Role of this switch in a cluster.
I32 hgmpClusterMaxPoolNum	1.3.6.1.4.1.2011.6.7.1.17	Integer32	read-only	Maximum switch members that the cluster can support (including the command switch).
MAC hgmpClusterCmdSwMac	1.3.6.1.4.1.2011.6.7.1.18	MacAddress	read-only	The mac address of command switch. It will be 00:00:00:00:00:00 when not a member of a cluster.
INT hgmpRun	1.3.6.1.4.1.2011.6.7.1.19	INTEGER	read-write	Status of the cluster function.
INT hgmpClusterAutojoin	1.3.6.1.4.1.2011.6.7.1.20	INTEGER	read-write	Status of the cluster autojoin function. The default value is false(0).
I32 hgmpClusterDiscAgingTime	1.3.6.1.4.1.2011.6.7.1.21	Integer32	read-write	Aging time of the lanswitch in disconnect state. The default value is 0.
ENA hgmpPlugAndPlayStatus	1.3.6.1.4.1.2011.6.7.1.22	EnabledStatus	read-write	Status of the plug and play function. The default value is disabled(2) .
MAC hgmpMultiMacAddress	1.3.6.1.4.1.2011.6.7.1.23	MacAddress	read-write	Multicast MAC address of cluster. The default value is '01:80:C2:00:00:0A'.
I32 hgmpManageVlan	1.3.6.1.4.1.2011.6.7.1.24	Integer32	read-write	ID of the management VLAN of the cluster. The default value is 1.
IP hgmpSftpServer	1.3.6.1.4.1.2011.6.7.1.25	IpAddress	read-write	The cluster members can access the SFTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
hgmpUnrelatedPortNdpAdminTable	1.3.6.1.4.1.2011.6.7.1.26		not-accessible	The table of the commands to set the NDP status on unrelated interfaces of cluster members.
hgmpUnrelatedPortNdpAdminEntry	1.3.6.1.4.1.2011.6.7.1.26.1		not-accessible	The entry used to set the NDP status on unrelated interfaces of cluster members.
I32 hgmpUnrelatedPortNdpAdminCmdId	1.3.6.1.4.1.2011.6.7.1.26.1.1	Integer32	not-accessible	The identifier of the command to set the NDP status on unrelated interfaces of cluster members.
INT hgmpUnrelatedPortNdpAdminGroupType	1.3.6.1.4.1.2011.6.7.1.26.1.2	INTEGER	read-create	Type of grouping member swithces.
OCT hgmpUnrelatedPortNdpAdminGroupValue	1.3.6.1.4.1.2011.6.7.1.26.1.3	OCTET STRING	read-create	Details about grouping member switches.
ENA hgmpUnrelatedPortNdpAdminStatus	1.3.6.1.4.1.2011.6.7.1.26.1.4	EnabledStatus	read-write	The flag bit identifying whether NDP is enabled or not on unrelated interface on unrelated interfaces of cluster members.
ROW hgmpUnrelatedPortNdpAdminRowStatus	1.3.6.1.4.1.2011.6.7.1.26.1.5	RowStatus	read-create	Row status for this table.
hgmpUnrelatedPortNdpResultTable	1.3.6.1.4.1.2011.6.7.1.27		not-accessible	The result table of enabling or disabling NDP on unrelated interfaces of cluster members.
hgmpUnrelatedPortNdpResultEntry	1.3.6.1.4.1.2011.6.7.1.27.1		not-accessible	The entry of the result when enabling or disabling NDP on unrelated interfaces of cluster members.
MAC hgmpUnrelatedPortNdpResultMemberMac	1.3.6.1.4.1.2011.6.7.1.27.1.1	MacAddress	not-accessible	MAC address of the member switch.
I32 hgmpUnrelatedPortNdpResultMemberId	1.3.6.1.4.1.2011.6.7.1.27.1.2	Integer32	read-only	Identifier of the member switch.
INT hgmpUnrelatedPortNdpResult	1.3.6.1.4.1.2011.6.7.1.27.1.3	INTEGER	read-only	Results returned from member switches.
hgmpUnrelatedPortNtdpAdminTable	1.3.6.1.4.1.2011.6.7.1.28		not-accessible	The table of the commands to set the NTDP status on unrelated interfaces of cluster members.
hgmpUnrelatedPortNtdpAdminEntry	1.3.6.1.4.1.2011.6.7.1.28.1		not-accessible	The entry used to set the NTDP status on unrelated interfaces of cluster members.
I32 hgmpUnrelatedPortNtdpAdminCmdId	1.3.6.1.4.1.2011.6.7.1.28.1.1	Integer32	not-accessible	The identifier of the command to set the NTDP status on unrelated interfaces of cluster members.
INT hgmpUnrelatedPortNtdpAdminGroupType	1.3.6.1.4.1.2011.6.7.1.28.1.2	INTEGER	read-create	Type of grouping member swithces.
OCT hgmpUnrelatedPortNtdpAdminGroupValue	1.3.6.1.4.1.2011.6.7.1.28.1.3	OCTET STRING	read-create	Details about grouping member switches.
ENA hgmpUnrelatedPortNtdpAdminStatus	1.3.6.1.4.1.2011.6.7.1.28.1.4	EnabledStatus	read-write	The flag bit identifying whether NTDP is enabled or not on unrelated interface on unrelated interfaces of cluster members.
ROW hgmpUnrelatedPortNtdpAdminRowStatus	1.3.6.1.4.1.2011.6.7.1.28.1.5	RowStatus	read-create	Row status for this table.
hgmpUnrelatedPortNtdpResultTable	1.3.6.1.4.1.2011.6.7.1.29		not-accessible	The result table of enabling or disabling NTDP on unrelated interfaces of cluster members.
hgmpUnrelatedPortNtdpResultEntry	1.3.6.1.4.1.2011.6.7.1.29.1		not-accessible	The entry of the result when enabling or disabling NTDP on unrelated interfaces of cluster members.
MAC hgmpUnrelatedPortNtdpResultMemberMac	1.3.6.1.4.1.2011.6.7.1.29.1.1	MacAddress	not-accessible	MAC address of the member switch.
I32 hgmpUnrelatedPortNtdpResultMemberId	1.3.6.1.4.1.2011.6.7.1.29.1.2	Integer32	read-only	Identifier of the member switch.
INT hgmpUnrelatedPortNtdpResult	1.3.6.1.4.1.2011.6.7.1.29.1.3	INTEGER	read-only	Results returned from member switches.
hgmpBatchUpgradeTable	1.3.6.1.4.1.2011.6.7.1.30		not-accessible	Table of batch upgrade commands.
hgmpBatchUpgradeEntry	1.3.6.1.4.1.2011.6.7.1.30.1		not-accessible	Provides the information of batch upgrade entry.
I32 hgmpBatchUpgradeCmdId	1.3.6.1.4.1.2011.6.7.1.30.1.1	Integer32	not-accessible	Identifier of batch upgrade commands.
INT hgmpBatchUpgradeGroupType	1.3.6.1.4.1.2011.6.7.1.30.1.2	INTEGER	read-create	Type of grouping member switches.
OCT hgmpBatchUpgradeGroupValue	1.3.6.1.4.1.2011.6.7.1.30.1.3	OCTET STRING	read-create	Details about grouping member switches.
INT hgmpBatchUpgradeFileType	1.3.6.1.4.1.2011.6.7.1.30.1.4	INTEGER	read-create	Type of the file to be upgraded.
OCT hgmpBatchUpgradeFileName	1.3.6.1.4.1.2011.6.7.1.30.1.5	OCTET STRING	read-create	Path of the file to be upgraded.
ROW hgmpBatchUpgradeRowStatus	1.3.6.1.4.1.2011.6.7.1.30.1.6	RowStatus	read-create	Row status for this table.
hgmpBatchUpgradeResultTable	1.3.6.1.4.1.2011.6.7.1.31		not-accessible	Results of batch commands returned from member switches.
hgmpBatchUpgradeResultEntry	1.3.6.1.4.1.2011.6.7.1.31.1		not-accessible	Provides the result of batch upgrade entry.
MAC hgmpBatchUpgradeResultMemberMac	1.3.6.1.4.1.2011.6.7.1.31.1.1	MacAddress	not-accessible	MAC address of the member switch.
I32 hgmpBatchUpgradeResultMemberId	1.3.6.1.4.1.2011.6.7.1.31.1.2	Integer32	read-only	Identifier of the member switch.
INT hgmpBatchUpgradeResult	1.3.6.1.4.1.2011.6.7.1.31.1.3	INTEGER	read-only	Results returned from member switchs.
hgmpBatchRebootTable	1.3.6.1.4.1.2011.6.7.1.32		not-accessible	Table of commands for member switch reboot.
hgmpBatchRebootEntry	1.3.6.1.4.1.2011.6.7.1.32.1		not-accessible	Provides the information of member reboot entry.
I32 hgmpBatchRebootCmdId	1.3.6.1.4.1.2011.6.7.1.32.1.1	Integer32	not-accessible	Identifier of the commands for member switch reboot.
INT hgmpBatchRebootGroupType	1.3.6.1.4.1.2011.6.7.1.32.1.2	INTEGER	read-create	Type of grouping member swithces.
OCT hgmpBatchRebootGroupValue	1.3.6.1.4.1.2011.6.7.1.32.1.3	OCTET STRING	read-create	Details about grouping member switches.
ROW hgmpBatchRebootRowStatus	1.3.6.1.4.1.2011.6.7.1.32.1.4	RowStatus	read-create	Row status for this table.
hgmpBatchRebootResultTable	1.3.6.1.4.1.2011.6.7.1.33		not-accessible	Results of reboot command returned from member switches.
hgmpBatchRebootResultEntry	1.3.6.1.4.1.2011.6.7.1.33.1		not-accessible	Provides the result of member reboot entry.
MAC hgmpBatchRebootResultMemberMac	1.3.6.1.4.1.2011.6.7.1.33.1.1	MacAddress	not-accessible	MAC address of the member switch.
I32 hgmpBatchRebootResultMemberId	1.3.6.1.4.1.2011.6.7.1.33.1.2	Integer32	read-only	Identifier of the member switch.
INT hgmpBatchRebootResult	1.3.6.1.4.1.2011.6.7.1.33.1.3	INTEGER	read-only	Results returned from member switches.
hgmpBatchSaveTable	1.3.6.1.4.1.2011.6.7.1.34		not-accessible	The table of saving configuration files on cluster members.
hgmpBatchSaveEntry	1.3.6.1.4.1.2011.6.7.1.34.1		not-accessible	The entry of saving configuration files on cluster members.
I32 hgmpBatchSaveCmdId	1.3.6.1.4.1.2011.6.7.1.34.1.1	Integer32	not-accessible	The identifier of the commands to save configuration files on cluster members.
INT hgmpBatchSaveGroupType	1.3.6.1.4.1.2011.6.7.1.34.1.2	INTEGER	read-create	Type of grouping member swithces.
OCT hgmpBatchSaveGroupValue	1.3.6.1.4.1.2011.6.7.1.34.1.3	OCTET STRING	read-create	Details about grouping member switches.
ROW hgmpBatchSaveRowStatus	1.3.6.1.4.1.2011.6.7.1.34.1.4	RowStatus	read-create	Row status for this table.
hgmpBatchSaveResultTable	1.3.6.1.4.1.2011.6.7.1.35		not-accessible	The results of saving configuration files on cluster members.
hgmpBatchSaveResultEntry	1.3.6.1.4.1.2011.6.7.1.35.1		not-accessible	The entry of result when saving configuration files on cluster members.
MAC hgmpBatchSaveResultMemberMac	1.3.6.1.4.1.2011.6.7.1.35.1.1	MacAddress	not-accessible	MAC address of the member switch.
I32 hgmpBatchSaveResultMemberId	1.3.6.1.4.1.2011.6.7.1.35.1.2	Integer32	read-only	Identifier of the member switch.
INT hgmpBatchSaveResult	1.3.6.1.4.1.2011.6.7.1.35.1.3	INTEGER	read-only	Results returned from member switches.
hgmpBatchSynchronizeCfgFileTable	1.3.6.1.4.1.2011.6.7.1.36		not-accessible	The table of synchronizing configuration files on cluster members.
hgmpBatchSynchronizeCfgFileEntry	1.3.6.1.4.1.2011.6.7.1.36.1		not-accessible	The entry of synchronizing configuration files on cluster members.
I32 hgmpBatchSynchronizeCfgFileCmdId	1.3.6.1.4.1.2011.6.7.1.36.1.1	Integer32	not-accessible	The identifier of the command of synchronizing configuration files on cluster members.
INT hgmpBatchSynchronizeCfgFileGroupType	1.3.6.1.4.1.2011.6.7.1.36.1.2	INTEGER	read-create	Type of grouping member swithces.
OCT hgmpBatchSynchronizeCfgFileGroupValue	1.3.6.1.4.1.2011.6.7.1.36.1.3	OCTET STRING	read-create	Details about grouping member switches.
ROW hgmpBatchSynchronizeCfgFileRowStatus	1.3.6.1.4.1.2011.6.7.1.36.1.4	RowStatus	read-create	Row status for this table.
hgmpBatchSynchronizeCfgFileResultTable	1.3.6.1.4.1.2011.6.7.1.37		not-accessible	The result of synchronizing configuration files on cluster members.
hgmpBatchSynchronizeCfgFileResultEntry	1.3.6.1.4.1.2011.6.7.1.37.1		not-accessible	The entry of result when synchronizing configuration files on cluster members.
MAC hgmpBatchSynchronizeCfgFileResultMemberMac	1.3.6.1.4.1.2011.6.7.1.37.1.1	MacAddress	not-accessible	MAC address of the member switch.
I32 hgmpBatchSynchronizeCfgFileResultMemberId	1.3.6.1.4.1.2011.6.7.1.37.1.2	Integer32	read-only	Identifier of the member switch.
INT hgmpBatchSynchronizeCfgFileResult	1.3.6.1.4.1.2011.6.7.1.37.1.3	INTEGER	read-only	Results returned from member switches.
I32 hgmpMemberRebootTimeoutValue	1.3.6.1.4.1.2011.6.7.1.38	Integer32	read-write	Timeout time of the member reboot operation (in seconds). The default value is 360 seconds.
INT hgmpClusterVersion	1.3.6.1.4.1.2011.6.7.1.39	INTEGER	read-write	Configure the cluster version. The default value is v2c(2).
hwStackObject	1.3.6.1.4.1.2011.6.7.2
hgmpStackEventsV2	1.3.6.1.4.1.2011.6.7.2.0
NTF hgmpStackMemberfailure	1.3.6.1.4.1.2011.6.7.2.0.1			When a stack member failed, send an SNMP trap to the network manager.
NTF hgmpStackMemberRecover	1.3.6.1.4.1.2011.6.7.2.0.2			When a stack member recovered, send an SNMP trap to the network manager.
NTF hgmpStackMemberStatusChange	1.3.6.1.4.1.2011.6.7.2.0.3			When a stack member status changed, send an SNMP trap to the network manager.
I32 hgmpStackMemberTableChange	1.3.6.1.4.1.2011.6.7.2.1	Integer32	read-only	Change identifier of the stack member table. The default value is 0.
I32 hgmpStackMemberDisconRate	1.3.6.1.4.1.2011.6.7.2.2	Integer32	read-only	Disconnection rate of the stack member switches. The default value is 0.
INT hgmpMainLanswitchFlag	1.3.6.1.4.1.2011.6.7.2.3	INTEGER	read-write	Main switch flag. The default value is false(0).
IP hgmpStackIpPoolStartIP	1.3.6.1.4.1.2011.6.7.2.4	IpAddress	read-write	The first address of management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. The default value is '0.0.0.0'.
I32 hgmpStackIpPoolLength	1.3.6.1.4.1.2011.6.7.2.5	Integer32	read-write	The length of the management IP segment assigned by the master switch, which cannot be modified if there is IP address assignment. The default value is 17.
hgmpStackMemberTable	1.3.6.1.4.1.2011.6.7.2.6		not-accessible	Stack member table.
hgmpStackMemberEntry	1.3.6.1.4.1.2011.6.7.2.6.1		not-accessible	Provides information about the stack member entry.
OCT hgmpStackMemberDeviceId	1.3.6.1.4.1.2011.6.7.2.6.1.1	OCTET STRING	read-only	2 bytes address type of the switch + 2 bytes/0 + MAC address, comprising a hexadecimal number string.
I32 hgmpStackMemberSerial	1.3.6.1.4.1.2011.6.7.2.6.1.2	Integer32	read-only	When adding a member switch to the stack, the master switch will assign a unique integer to identify it.
IP hgmpStackMemberIpAddr	1.3.6.1.4.1.2011.6.7.2.6.1.3	IpAddress	read-only	The private member IP address for the communication inside the stack.
OCT hgmpStackMemberName	1.3.6.1.4.1.2011.6.7.2.6.1.4	OCTET STRING	read-only	Hostname of the member switch.
OCT hgmpStackMemberPassword	1.3.6.1.4.1.2011.6.7.2.6.1.5	OCTET STRING	read-only	Member password for joining a stack.
OCT hgmpStackMemberPlatform	1.3.6.1.4.1.2011.6.7.2.6.1.6	OCTET STRING	read-only	Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
INT hgmpStackMemberStatus	1.3.6.1.4.1.2011.6.7.2.6.1.7	INTEGER	read-only	Member status on the master switch, used for displaying the network management status. The default value is fault.
I32 hgmpStackMemberDisconCount	1.3.6.1.4.1.2011.6.7.2.6.1.8	Integer32	read-only	Count of inside communication disconnections between the member switch and the main switch.
I32 hgmpStackMemberEnrollTime	1.3.6.1.4.1.2011.6.7.2.6.1.9	Integer32	read-only	Enrollment time of the member, measured in seconds.
INT hgmpStackRole	1.3.6.1.4.1.2011.6.7.2.7	INTEGER	read-only	Role of this switch in a stack. The default value is roleCASW(16).
I32 hgmpStackMaxPoolNum	1.3.6.1.4.1.2011.6.7.2.8	Integer32	read-only	Maximum switch members in a stack that the switch supports (including the main switch).
MAC hgmpStackMainSwMac	1.3.6.1.4.1.2011.6.7.2.9	MacAddress	read-only	The MAC address of the main switch. It will be 00:00:00:00:00:00 when not a member of a stack.
IP hgmpStackIpPoolMask	1.3.6.1.4.1.2011.6.7.2.10	IpAddress	read-write	The mask of the management IP segment assigned by the master switch, which cannot be modified if there is IP address assignment. The default value is '255.255.0.0 '.
hwNTDPObject	1.3.6.1.4.1.2011.6.7.4
I32 hgmpNTDPCollectTopTime	1.3.6.1.4.1.2011.6.7.4.1	Integer32	read-write	Topology collection interval of the command switch of the cluster, measured in minutes. The default value is 0.
I32 hgmpNTDPHopRange	1.3.6.1.4.1.2011.6.7.4.2	Integer32	read-write	Range of the topology collection of the command switch. The maximum value of this object may vary with different types of products.
INT hgmpNTDPRun	1.3.6.1.4.1.2011.6.7.4.3	INTEGER	read-write	Status of the NTDP function.
I32 hgmpNTDPPortDelay	1.3.6.1.4.1.2011.6.7.4.4	Integer32	read-write	Set the delay to forward the topology request via the ports, measured in milliseconds. The default value is 20.
I32 hgmpNTDPHopDelay	1.3.6.1.4.1.2011.6.7.4.5	Integer32	read-write	Set the delay to forward the topology request from each hop, measured in milliseconds. The default value is 200.
I32 hgmpNTDPLastTopCollectDuration	1.3.6.1.4.1.2011.6.7.4.6	Integer32	read-only	Duration of the latest overall topology collection, a performance count measured in milliseconds. The default value is 0.
I32 hgmpNTDPCacheChange	1.3.6.1.4.1.2011.6.7.4.7	Integer32	read-only	Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. The default value is 0.
I32 hgmpNTDPTOPTableChange	1.3.6.1.4.1.2011.6.7.4.8	Integer32	read-only	Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. The default value is 0.
hgmpNTDPInterfaceTable	1.3.6.1.4.1.2011.6.7.4.9		not-accessible	Status of NTDP function on the switch's port.
hgmpNTDPInterfaceEntry	1.3.6.1.4.1.2011.6.7.4.9.1		not-accessible	Provides information about the NTDP function on the switch's port.
I32 hgmpNTDPInterfaceIfIndex	1.3.6.1.4.1.2011.6.7.4.9.1.1	Integer32	read-only	Unique identifier of an interface of the device.
INT hgmpNTDPInterfaceEnable	1.3.6.1.4.1.2011.6.7.4.9.1.2	INTEGER	read-write	If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry to false(0).
hgmpNTDPCacheTable	1.3.6.1.4.1.2011.6.7.4.10		not-accessible	Access information about the switch from the topology table.
hgmpNTDPCacheEntry	1.3.6.1.4.1.2011.6.7.4.10.1		not-accessible	Provides information about the switch from the topology table.
I32 hgmpNTDPCacheHashIndex	1.3.6.1.4.1.2011.6.7.4.10.1.1	Integer32	read-only	NTDP information is saved in a HASH table on the command switch. Using DeviceID as an index will lead to the comparison of a large number of character strings, which puts too many burdens on the command switch. A HASHIndex is added to reduce the character string comparison to the least range.
OCT hgmpNTDPCacheDeviceID	1.3.6.1.4.1.2011.6.7.4.10.1.2	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising as a character string of the hexadecimal number.
OCT hgmpNTDPCacheClusterName	1.3.6.1.4.1.2011.6.7.4.10.1.3	OCTET STRING	read-only	Name of the cluster including the device.
INT hgmpNTDPCacheClusterRole	1.3.6.1.4.1.2011.6.7.4.10.1.4	INTEGER	read-only	Cluster role of the current device, which can be a command switch(0X01), member switch(0X02), backup switch(0X03), candidate switch(0X10) or an independent switch(incapable of cluster member)(0X11). The default value is 17.
I32 hgmpNTDPCacheCapabilities	1.3.6.1.4.1.2011.6.7.4.10.1.5	Integer32	read-only	The capabilities of the device. Zero indicates that the field was not included in the latest NTDP packet. The default value is 0.
OCT hgmpNTDPCacheVersion	1.3.6.1.4.1.2011.6.7.4.10.1.6	OCTET STRING	read-only	The version information about the corresponding device. A null string indicates that the field was not included in the latest NTDP packet.
OCT hgmpNTDPCachePlatform	1.3.6.1.4.1.2011.6.7.4.10.1.7	OCTET STRING	read-only	Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
I32 hgmpNTDPCacheMngVLAN	1.3.6.1.4.1.2011.6.7.4.10.1.8	Integer32	read-only	The management VLAN ID of a device. The default value is 1.
I32 hgmpNTDPCacheHop	1.3.6.1.4.1.2011.6.7.4.10.1.9	Integer32	read-only	Hops to this switch.
hgmpNTDPTopTable	1.3.6.1.4.1.2011.6.7.4.11		not-accessible	Access the topology structure collected by the NTDP.
hgmpNTDPTopEntry	1.3.6.1.4.1.2011.6.7.4.11.1		not-accessible	Provides information about the topology structure collected by the NTDP.
I32 hgmpNTDPTopHashIndex	1.3.6.1.4.1.2011.6.7.4.11.1.1	Integer32	read-only	NTDP information is saved in a HASH table on the command switch. Using DeviceID as an index will lead to the comparison of a large number of character strings, which puts too many burdens on the command switch. A HASHIndex is added to reduce the character string comparison to the least range.
OCT hgmpNTDPTopEdgeStartDevID	1.3.6.1.4.1.2011.6.7.4.11.1.2	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.
I32 hgmpNTDPTopEdgeIndex	1.3.6.1.4.1.2011.6.7.4.11.1.3	Integer32	read-only	Edge index of this entry in the data structure.
OCT hgmpNTDPTopEdgeEndDevID	1.3.6.1.4.1.2011.6.7.4.11.1.4	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.
OCT hgmpNTDPTopEdgeStartPort	1.3.6.1.4.1.2011.6.7.4.11.1.5	OCTET STRING	read-only	The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
INT hgmpNTDPTopEdgeStartPortFullDuplex	1.3.6.1.4.1.2011.6.7.4.11.1.6	INTEGER	read-only	The full-duplex status of the first port on a topology edge. The default value is half.
I32 hgmpNTDPTopEdgeStartPortSpeed	1.3.6.1.4.1.2011.6.7.4.11.1.7	Integer32	read-only	The speed of the first port on a topology edge. The default value is 0.
OCT hgmpNTDPTopEdgeEndPort	1.3.6.1.4.1.2011.6.7.4.11.1.8	OCTET STRING	read-only	The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
I32 hgmpNTDPTopEdgeStartPortIfIndex	1.3.6.1.4.1.2011.6.7.4.11.1.9	Integer32	read-only	The interface index of the start port.
I32 hgmpNTDPTopEdgeEndPortIfIndex	1.3.6.1.4.1.2011.6.7.4.11.1.10	Integer32	read-only	The iterface index of the end port.
INT hgmpNTDPExplore	1.3.6.1.4.1.2011.6.7.4.12	INTEGER	read-write	The value of this object identifies whether to start collecting topology information. 1 indicates to start collecting topology information. 0 is the default value, indicating doing nothing. The get operation always returns 0.
hgmpNTDPTopoLinkTable	1.3.6.1.4.1.2011.6.7.4.13		not-accessible	This object indicates the topology link table collected using NTDP.
hgmpNTDPTopoLinkEntry	1.3.6.1.4.1.2011.6.7.4.13.1		not-accessible	This object indicates the topology link information collected using NTDP.
OCT hgmpNTDPTopoLocalDeviceID	1.3.6.1.4.1.2011.6.7.4.13.1.1	OCTET STRING	not-accessible	This object indicates the ID of the local device. This ID is a hexadecimal string that comprises 2 bytes address type of the member switch, 2 bytes /0, and MAC address.
OCT hgmpNTDPTopoLocalPortName	1.3.6.1.4.1.2011.6.7.4.13.1.2	OCTET STRING	not-accessible	This object indicates the name of the local port.
OCT hgmpNTDPTopoNbrDeviceID	1.3.6.1.4.1.2011.6.7.4.13.1.3	OCTET STRING	not-accessible	This object indicates the ID of the neighbor device. This ID is a hexadecimal string that comprises 2 bytes address type of the member switch, 2 bytes /0, and MAC address.
OCT hgmpNTDPTopoNbrPortName	1.3.6.1.4.1.2011.6.7.4.13.1.4	OCTET STRING	not-accessible	This object indicates the name of the neighbor port.
INT hgmpNTDPTopoLinkStatus	1.3.6.1.4.1.2011.6.7.4.13.1.5	INTEGER	read-only	This object indicates the topology link status.
hgmpNTDPNotifications	1.3.6.1.4.1.2011.6.7.4.14
NTF hgmpNTDPTopoChange	1.3.6.1.4.1.2011.6.7.4.14.1			This object indicates that an SNMP trap is sent to the NMS when the NTDP topology is changed.
hwNDPObject	1.3.6.1.4.1.2011.6.7.5
INT hwNDPStatus	1.3.6.1.4.1.2011.6.7.5.1	INTEGER	read-write	NDP protocol module enable flag.
I32 hwNDPHelloTimer	1.3.6.1.4.1.2011.6.7.5.2	Integer32	read-write	NDP packet transmission interval, measured in seconds. The default value is 60.
I32 hwNDPAgingTime	1.3.6.1.4.1.2011.6.7.5.3	Integer32	read-write	How long NDP information about the local switch can be hold in the adjacent switch, measured in seconds. The default value is 180.
C32 hwNDPChange	1.3.6.1.4.1.2011.6.7.5.4	Counter32	read-only	Change identifier of the Neighbor table.
hwNDPPortTable	1.3.6.1.4.1.2011.6.7.5.5		not-accessible	Status of NDP function on the switch's port.
hwNDPPortEntry	1.3.6.1.4.1.2011.6.7.5.5.1		not-accessible	Provides information about the NDP function on the switch's port.
I32 hwNDPIfIndex	1.3.6.1.4.1.2011.6.7.5.5.1.1	Integer32	read-only	Unique identifier of an interface of the device.
INT hwNDPPortStatus	1.3.6.1.4.1.2011.6.7.5.5.1.2	INTEGER	read-write	If it is enabled, the device will send and receive NDP packets via the interface. To disable the NDP function on the interface, set the entry to false(0).
hwNDPPortNbTable	1.3.6.1.4.1.2011.6.7.5.6		not-accessible	Table of NDP neighbor information.
hwNDPPortNbEntry	1.3.6.1.4.1.2011.6.7.5.6.1		not-accessible	Provides neighbor information about NDP.
OCT hwNDPPortNbDeviceId	1.3.6.1.4.1.2011.6.7.5.6.1.1	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.
OCT hwNDPPortNbPortName	1.3.6.1.4.1.2011.6.7.5.6.1.2	OCTET STRING	read-only	Unique identifier of a port. A null string indicates that the field was not included in the latest NDP packet. Interface type + card number / slot number / sequence number.
OCT hwNDPPortNbDeviceName	1.3.6.1.4.1.2011.6.7.5.6.1.3	OCTET STRING	read-only	Device name. A null string indicates that the field was not included in the latest NDP packet.
INT hwNDPPortNbPortMode	1.3.6.1.4.1.2011.6.7.5.6.1.4	INTEGER	read-only	The neighbor port duplex mode.
OCT hwNDPPortNbProductVer	1.3.6.1.4.1.2011.6.7.5.6.1.5	OCTET STRING	read-only	Product version. A null string indicates that the field was not included in the latest NDP packet.
OCT hwNDPPortNbHardVer	1.3.6.1.4.1.2011.6.7.5.6.1.6	OCTET STRING	read-only	Hardware version. A null string indicates that the field was not included in the latest NDP packet.
OCT hwNDPPortNbBootromVer	1.3.6.1.4.1.2011.6.7.5.6.1.7	OCTET STRING	read-only	Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
OCT hwNDPPortNbSoftVer	1.3.6.1.4.1.2011.6.7.5.6.1.8	OCTET STRING	read-only	Software version. A null string indicates that the field was not included in the latest NDP packet.
I32 hwNDPPortNbAgingtime	1.3.6.1.4.1.2011.6.7.5.6.1.9	Integer32	read-only	How long NDP information about the local switch can be hold in the adjacent switch, measured in seconds.
ENA hwNDPTrunkMemberEnable	1.3.6.1.4.1.2011.6.7.5.7	EnabledStatus	read-write	The value of this object identifies whether to enable neighbor discovery on trunk member interfaces.
hwClusterConformance	1.3.6.1.4.1.2011.6.7.6
hwClusterGroups	1.3.6.1.4.1.2011.6.7.6.1
currentObjectGroup	1.3.6.1.4.1.2011.6.7.6.1.1			Enter the description of the created OBJECT-GROUP.
currentNotificationGroup	1.3.6.1.4.1.2011.6.7.6.1.2			Enter the description of the created NOTIFICATION-GROUP.
hwClusterCompliances	1.3.6.1.4.1.2011.6.7.6.2
basicCompliance	1.3.6.1.4.1.2011.6.7.6.2.1			Enter the description of the created MODULE-COMPLIANCE.

RFC description

Huawei private MIB managing cluster, stack, and network topology discovery protocols including HGMP clustering features.

Start monitoring Huawei stackable/clusterable switch (cluster/stack/NDP/NTDP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-HGMP-MIB

What Is HUAWEI-HGMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description