HUAWEI-IF-QOS-MIB

All MIBs › HUAWEI-IF-QOS-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2004-09-15

Category: Quality of Service, Vendor: Huawei

Description: Huawei interface QoS MIB for applying and monitoring QoS traffic policies at the interface level including ingress and egress policy bindings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-IF-QOS-MIB?

HUAWEI-IF-QOS-MIB is a Huawei enterprise-private MIB for applying and monitoring interface-level Quality of Service (QoS) traffic policies, such as congestion management, on Huawei switches and routers. It exposes configuration data (policy-to-interface bindings and direction of application) alongside congestion-management statistics. Though QoS-focused rather than raw environmental monitoring, it supports hardware/software status visibility by revealing queue congestion and policy enforcement state that hint at overloaded links or misapplied traffic shaping on a given interface. It typically operates alongside standard IF-MIB interface objects, since QoS policies are bound per ifIndex, and fits within Huawei's broader private QoS MIB family for class-maps and queues. It is deployed on Huawei enterprise and carrier switches/routers wherever traffic prioritization and congestion avoidance are configured. Engineers can download the HUAWEI-IF-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-IF-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei switch
Huawei router

Monitoring Examples

No sample objects were supplied for this MIB, so specific table or object names cannot be confirmed. In general use, an administrator would associate a QoS policy with an interface's ingress or egress direction and then poll counters for that binding to detect congestion or dropped packets on an oversubscribed link. Without concrete object names, a fully grounded technical example cannot be honestly given.

What Can Be Monitored

interface QoS policy binding
ingress/egress policy direction
congestion/drop counters

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using qosRTPIfQueueSize OID:

Select a Huawei switch or router (interface-level QoS/congestion management) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type qosRTPIfQueueSize into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the size of Rtpq Queue. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwQoS	1.3.6.1.4.1.2011.5.25.32
hwIfQoSMib	1.3.6.1.4.1.2011.5.25.32.2			The HUAWEI-IF-QOS-MIB contains objects to apply on interface for congestion management.
qosFIFOTable	1.3.6.1.4.1.2011.5.25.32.2.1		not-accessible	FIFO(First In First Out) queuing table. FIFO is a kind of queuing strategy applied on interface for congestion management. And It's the default queuing strategy when other queuing strategy not configured on interface. This table is about the FIFO configuration and running infomation.
qosFIFOEntry	1.3.6.1.4.1.2011.5.25.32.2.1.1		not-accessible	FIFO configuration and running information Command:qos fifo queue-length
INT qosFIFOIfIndex	1.3.6.1.4.1.2011.5.25.32.2.1.1.1	INTEGER	read-only	The index of interface applying FIFO queuing strategy. The interface identified by the value of this index is the same interface as identified by the same value of ifIndex.
OCT qosFIFOIfName	1.3.6.1.4.1.2011.5.25.32.2.1.1.2	OCTET STRING	read-only	The description of interface identified by the value of qosFIFOIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosFIFOMaxQueueLen	1.3.6.1.4.1.2011.5.25.32.2.1.1.3	INTEGER	read-write	The maximum length of fifo queue which means the maximum count of packets that can be cached in the fifo queue.
INT qosFIFOCurQueueLen	1.3.6.1.4.1.2011.5.25.32.2.1.1.4	INTEGER	read-only	The current length of queue which means the count of packets cached in the fifo queue when the interface is congesting.
CTR qosFIFODiscardPkt	1.3.6.1.4.1.2011.5.25.32.2.1.1.5	Counter	read-only	The count of discarded packets which can't be enqueued fifo queue because the fifo queue is full.
INT qosUndoFIFO	1.3.6.1.4.1.2011.5.25.32.2.1.1.6	INTEGER	read-write	0: Only for get. 1: Set default value of the maximum length of fifo queue.
qosPqlDefaultTable	1.3.6.1.4.1.2011.5.25.32.2.2		not-accessible	PQL(Priority Queue List) default-queue table. There are four priority queues:top,middle,normal,bottom. The priority level of these queues is from high to low. A type of priority queue is assigned for those packets that do not match any other rule in each PQL whose number is from 1 to 16. Such queue is the default queue. For each PQL the default queue may be different. The default queue is normal if other type of queue is not configured.
qosPqlDefaultEntry	1.3.6.1.4.1.2011.5.25.32.2.2.1		not-accessible	PQL default-queue configuration information. Command:qos pql group-number default-queue { top \| middle \| normal \| bottom }
INT qosPqlDefaultListNum	1.3.6.1.4.1.2011.5.25.32.2.2.1.1	INTEGER	read-only	The index of table, which is the PQL number. Any number from 1 to 16 identifies the priority queue list.
INT qosPqlDefaultQueueType	1.3.6.1.4.1.2011.5.25.32.2.2.1.2	INTEGER	read-write	The type of default priority queue,the default value is normal.
INT qosUndoPqlDefault	1.3.6.1.4.1.2011.5.25.32.2.2.1.3	INTEGER	read-write	0: Only for get. 1: Set default value of the defualt priority queue.
qosPqlQueueLenTable	1.3.6.1.4.1.2011.5.25.32.2.3		not-accessible	PQL(Priority Queue List) queue-length table There are four priority queues:top,middle,normal,bottom. The priority level of these queues is from high to low. The maximum queue length of each queue can be configured in each PQL whose number is from 1 to 16. Each priority queue has individual default maximum queue length.
qosPqlQueueLenEntry	1.3.6.1.4.1.2011.5.25.32.2.3.1		not-accessible	PQL queue-length configuration information. Command:qos pql pql-index queue { top \| middle \| normal \| bottom } queue-length queue-length
INT qosPqlQueLenListNum	1.3.6.1.4.1.2011.5.25.32.2.3.1.1	INTEGER	read-only	The index of table, which is the PQL number. Any number from 1 to 16 identifies the priority queue list.
INT qosPqlQueLenQueueType	1.3.6.1.4.1.2011.5.25.32.2.3.1.2	INTEGER	read-only	The index of table, which is the type of priority queue.
INT qosPqlQueLenValue	1.3.6.1.4.1.2011.5.25.32.2.3.1.3	INTEGER	read-write	The maximum length of specified queue. Each priority queue has individual default maximum queue length: Top : 20 Middle: 40 Normal: 60 Bottom: 80
INT qosUndoPqlQueLen	1.3.6.1.4.1.2011.5.25.32.2.3.1.4	INTEGER	read-write	0: Only for get. 1: Set default value of the maximum length of specified queue.
qosPqlIfTable	1.3.6.1.4.1.2011.5.25.32.2.4		not-accessible	PQL(Priority Queue List) inbound-interface table There are four priority queues:top,middle,normal,bottom. The priority level of these queues is from high to low. The packets received from the specified interface can be configured to enqueue specified priority queue in each PQL whose number is from 1 to 16.
qosPqlIfEntry	1.3.6.1.4.1.2011.5.25.32.2.4.1		not-accessible	PQL inbound-interface configuration information. Command:qos pql pql-index inbound-interface interface-type interface-number queue { top \| middle \| normal \| bottom }
INT qosPqlIfListNum	1.3.6.1.4.1.2011.5.25.32.2.4.1.1	INTEGER	read-only	The index of table, which is the PQL number. Any number from 1 to 16 identifies the priority queue list.
INT qosPqlIfIndex	1.3.6.1.4.1.2011.5.25.32.2.4.1.2	INTEGER	read-only	The index of table, which is the index of interface that the enqueuing packets are received from. The interface identified by the value of this index is the same interface as identified by the same value of ifIndex.
OCT qosPqlIfName	1.3.6.1.4.1.2011.5.25.32.2.4.1.3	OCTET STRING	read-only	The description of interface identified by the value of qosPqlIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosPqlIfQueueType	1.3.6.1.4.1.2011.5.25.32.2.4.1.4	INTEGER	read-write	The type of priority queue which the packets received from the specified interface will be put in.
INT qosUndoPqlIf	1.3.6.1.4.1.2011.5.25.32.2.4.1.5	INTEGER	read-write	0: Only for get. 1: delete the corresponding inbound-interface rule of the specified PQL number
qosPqlProtocolTable	1.3.6.1.4.1.2011.5.25.32.2.5		not-accessible	PQL(Priority Queue List) protocol table There are four priority queues:top,middle,normal,bottom. The priority level of these queues is from high to low. The packets which belong to the specified protocol type and match the specified traffic-classifying rule can be configured to enqueue specified priority queue in each PQL whose number is from 1 to 16.
qosPqlProtocolEntry	1.3.6.1.4.1.2011.5.25.32.2.5.1		not-accessible	PQL protocol configuration information. Command:qos pql pql-index protocol protocol-name queue-key key-value queue { top \| middle \| normal \| bottom }
INT qosPqlProListNum	1.3.6.1.4.1.2011.5.25.32.2.5.1.1	INTEGER	read-only	The index of table, which is the PQL number. Any number from 1 to 16 identifies the priority queue list.
INT qosPqlProName	1.3.6.1.4.1.2011.5.25.32.2.5.1.2	INTEGER	read-only	The index of table, which is the protocol type the enqueuing packets having.
INT qosPqlProQueKey	1.3.6.1.4.1.2011.5.25.32.2.5.1.3	INTEGER	read-only	The index of table, which is the key words of traffic-classify rule.
INT qosPqlProQueKeyValue	1.3.6.1.4.1.2011.5.25.32.2.5.1.4	INTEGER	read-only	The index of table, which is the value of key words. for greater-than,less-than,tcp,udp:0~65535 for acl:2000~3999 for NULL and fragment: 0 for exp-mask: 0~255
INT qosPqlProQueType	1.3.6.1.4.1.2011.5.25.32.2.5.1.5	INTEGER	read-write	The type of priority queue which the packets belong to the specified protocol type and match the specified traffic-classifying rule will be put in.
INT qosUndoPqlProtocol	1.3.6.1.4.1.2011.5.25.32.2.5.1.6	INTEGER	read-write	0: Only for get. 1: delete the corresponding protocol rule of the specified PQL number
qosPQTable	1.3.6.1.4.1.2011.5.25.32.2.6		not-accessible	PQ(Priority Queuing) table PQ is a kind of queuing strategy applied on interface for congestion management. PQ provides a mechanism to prioritize packets sent on an interface. If the specified priority list is applied to an interface the Priority Queuing strategy is applied on this interface. Only one list can be assigned per interface. This table is about the PQ configuration and running infomation.
qosPQEntry	1.3.6.1.4.1.2011.5.25.32.2.6.1		not-accessible	PQ configuration and running infomation Command:qos pq pql display qos pq interface
INT qosPQIfIndex	1.3.6.1.4.1.2011.5.25.32.2.6.1.1	INTEGER	read-only	The index of table, which is the index of interface applying Priority Queuing strategy. The interface identified by the value of this index is the same interface as identified by the same value of ifIndex.
INT qosPQListNum	1.3.6.1.4.1.2011.5.25.32.2.6.1.2	INTEGER	read-write	The number of PQL applied to an interface identified by the value of qosPQIfIndex.
OCT qosPQIfName	1.3.6.1.4.1.2011.5.25.32.2.6.1.3	OCTET STRING	read-only	The description of the interface by the value of qosPQIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosPQTopPkt	1.3.6.1.4.1.2011.5.25.32.2.6.1.4	INTEGER	read-only	The count of packets enqueued the top priority queue when congestion occoured in the interface.
CTR qosPQTopDiscard	1.3.6.1.4.1.2011.5.25.32.2.6.1.5	Counter	read-only	The count of discarded packets which can't be enqueued top priority queue because the top priority queue is full.
INT qosPQTopMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.6.1.6	INTEGER	read-only	The maximum length of top priority queue. The default value of maximum queue length is 20.
INT qosPQMiddlePkt	1.3.6.1.4.1.2011.5.25.32.2.6.1.7	INTEGER	read-only	The count of packets enqueued the middle priority queue when congestion occoured in the interface.
CTR qosPQMiddleDiscard	1.3.6.1.4.1.2011.5.25.32.2.6.1.8	Counter	read-only	The count of discarded packets which can't be enqueued middle priority queue because the middle priority queue is full.
INT qosPQMiddleMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.6.1.9	INTEGER	read-only	The maximum length of middle priority queue. The default value of maximum queue length is 40.
INT qosPQNormalPkt	1.3.6.1.4.1.2011.5.25.32.2.6.1.10	INTEGER	read-only	The count of packets enqueued the normal priority queue when congestion occoured in the interface.
CTR qosPQNormalDiscard	1.3.6.1.4.1.2011.5.25.32.2.6.1.11	Counter	read-only	The count of discarded packets which can't be enqueued normal priority queue because the normal priority queue is full.
INT qosPQNormalMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.6.1.12	INTEGER	read-only	The maximum length of normal priority queue. The default value of maximum queue length is 60.
INT qosPQBottomPkt	1.3.6.1.4.1.2011.5.25.32.2.6.1.13	INTEGER	read-only	The count of packets enqueued the bottom priority queue when congestion occoured in the interface.
CTR qosPQBottomDiscard	1.3.6.1.4.1.2011.5.25.32.2.6.1.14	Counter	read-only	The count of discarded packets which can't be enqueued bottom priority queue because the bottom priority queue is full.
INT qosPQBottomMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.6.1.15	INTEGER	read-only	The maximum length of bottom priority queue. The default value of maximum queue length is 80.
INT qosUndoPQ	1.3.6.1.4.1.2011.5.25.32.2.6.1.16	INTEGER	read-write	0:Only for get. 1:Set the default queuing on interface: FIFO.
qosCqlDefaultTable	1.3.6.1.4.1.2011.5.25.32.2.7		not-accessible	CQL(Custom Queue List) default-queue table. There are sixteen custom queues whose queue number is from 1 to 16. A custom queue is assigned for those packets that do not match any other rule in each CQL whose number is from 1 to 16. Such queue is the default queue. For each CQL the default queue may be different. The default queue is queue number 1 if other queue is not configured.
qosCqlDefaultEntry	1.3.6.1.4.1.2011.5.25.32.2.7.1		not-accessible	CQL default-queue configuration information. Command:qos cql group-number default-queue queue-number
INT qosCqlListNum	1.3.6.1.4.1.2011.5.25.32.2.7.1.1	INTEGER	read-only	The index of table, which is the CQL number. Any number from 1 to 16 identifies the custom queue list.
INT qosCqlQueueNum	1.3.6.1.4.1.2011.5.25.32.2.7.1.2	INTEGER	read-write	The number of default custom queue,the default value is queue number 1.
INT qosUndoCqlDefault	1.3.6.1.4.1.2011.5.25.32.2.7.1.3	INTEGER	read-write	0: Only for get. 1: Set default value of the defualt custom queue.
qosCqlIfTable	1.3.6.1.4.1.2011.5.25.32.2.8		not-accessible	CQL(Custom Queue List) inbound-interface table There are sixteen custom queues whose queue number is from 1 to 16. The packets received from the specified interface can be configured to enqueue specified custom queue in each CQL whose number is from 1 to 16.
qosCqlIfEntry	1.3.6.1.4.1.2011.5.25.32.2.8.1		not-accessible	CQL inbound-interface configuration information. Command:qos cql cql-index inbound-interface interface-type interface-number queue queue-number
INT qosCqlIfListNum	1.3.6.1.4.1.2011.5.25.32.2.8.1.1	INTEGER	read-only	The index of table, which is the CQL number. Any number from 1 to 16 identifies the custom queue list.
INT qosCqlIfIndex	1.3.6.1.4.1.2011.5.25.32.2.8.1.2	INTEGER	read-only	The index of table, which is the index of interface that the enqueuing packets are received from. The interface identified by the value of this index is the same interface as identified by the same value of ifIndex.
OCT qosCqlIfName	1.3.6.1.4.1.2011.5.25.32.2.8.1.3	OCTET STRING	read-only	The description of interface identified by the value of qosCqlIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosCqlIfQueueNum	1.3.6.1.4.1.2011.5.25.32.2.8.1.4	INTEGER	read-write	The number of custom queue which the packets received from the specified interface will be put in.
INT qosUndoCqlIf	1.3.6.1.4.1.2011.5.25.32.2.8.1.5	INTEGER	read-write	0: Only for get. 1: delete the corresponding inbound-interface rule of the specified CQL number
qosCqlProtocolTable	1.3.6.1.4.1.2011.5.25.32.2.9		not-accessible	CQL(Custom Queue List) protocol table. There are sixteen custom queues whose queue number is from 1 to 16. The packets which belong to the specified protocol type and match the specified traffic-classifying rule can be configured to enqueue specified custom queue in each CQL whose number is from 1 to 16.
qosCqlProtocolEntry	1.3.6.1.4.1.2011.5.25.32.2.9.1		not-accessible	CQL protocol configuration information. Command:qos cql cql-index protocol protocol-name queue-key key-value queue queue-number.
INT qosCqlProListNum	1.3.6.1.4.1.2011.5.25.32.2.9.1.1	INTEGER	read-only	The index of table, which is the CQL number. Any number from 1 to 16 identifies the custom queue list.
INT qosCqlProName	1.3.6.1.4.1.2011.5.25.32.2.9.1.2	INTEGER	read-only	The index of table, which is the protocol type the enqueuing packets having.
INT qosCqlProQueKey	1.3.6.1.4.1.2011.5.25.32.2.9.1.3	INTEGER	read-only	The index of table, which is the key words of traffic-classify rule.
INT qosCqlProQueKeyValue	1.3.6.1.4.1.2011.5.25.32.2.9.1.4	INTEGER	read-only	The index of table, which is the value of key words. for greater-than,less-than,tcp,udp:0~65535 for acl:2000~3999 for NULL and fragment: null for exp-mask: 0~255
INT qosCqlProQueNum	1.3.6.1.4.1.2011.5.25.32.2.9.1.5	INTEGER	read-write	The number of custom queue which the packets belong to the specified protocol type and match the specified traffic-classifying rule will be put in.
INT qosUndoCqlProtocol	1.3.6.1.4.1.2011.5.25.32.2.9.1.6	INTEGER	read-write	0: Only for get. 1: delete the corresponding protocol rule of the specified CQL number
qosCqlQueParaTable	1.3.6.1.4.1.2011.5.25.32.2.10		not-accessible	CQL(Custom Queue List) serving/queue-length table There are sixteen custom queues whose queue number is from 1 to 16. The maximum queue length of each queue and serving can be configured in each CQL whose number is from 1 to 16. Each custom queue has individual default maximum queue length and serving.
qosCqlQueParaEntry	1.3.6.1.4.1.2011.5.25.32.2.10.1		not-accessible	CQL serving/queue-length configuration information. Command:qos cql cql-index queue queue-number serving byte-number qos cql cql-index queue queue-number queue-length queue-length
INT qosCqlQueParaListNum	1.3.6.1.4.1.2011.5.25.32.2.10.1.1	INTEGER	read-only	The index of table, which is the CQL number. Any number from 1 to 16 identifies the custom queue list.
INT qosCqlQueParaQueNum	1.3.6.1.4.1.2011.5.25.32.2.10.1.2	INTEGER	read-only	The index of table, which is the queue number.
INT qosCqlQueParaServing	1.3.6.1.4.1.2011.5.25.32.2.10.1.3	INTEGER	read-write	The maximum bytes that the specified queue can transmit in each turn. The default value is 1500.
INT qosCqlQueParaMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.10.1.4	INTEGER	read-write	The maximum length of the specified queue.
INT qosUndoCqlQueParaServing	1.3.6.1.4.1.2011.5.25.32.2.10.1.5	INTEGER	read-write	0: Only for get. 1: Set the defualt value of the maximum bytes that the specified queue can transmit in each turn.
INT qosUndoCqlQueParaMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.10.1.6	INTEGER	read-write	0: Only for get. 1: Set the defualt value of the maximum length of the specified queue.
qosCQTable	1.3.6.1.4.1.2011.5.25.32.2.11		not-accessible	CQ(Custom Queuing) table CQ is a kind of queuing strategy applied on interface for congestion management. CQ allows a fairness not provided with PQ. Associated with each custom queue is a configurable serving, which specifies how many bytes of data should be delivered from the current queue by the system before the system moves on to the next queue. When a particular queue is being processed, packets are sent until the number of bytes sent exceeds the queue serving or until the queue is empty. If the specified custom list is applied to an interface the Custom Queuing strategy is applied on this interface. Only one list can be assigned per interface. This table is about the CQ configuration infomation.
qosCQEntry	1.3.6.1.4.1.2011.5.25.32.2.11.1		not-accessible	CQ configuration infomation Command:qos cq cql
INT qosCQIfIndex	1.3.6.1.4.1.2011.5.25.32.2.11.1.1	INTEGER	read-only	The index of table, which is the index of interface applying Custom Queuing strategy. The interface identified by the value of this index is the same interface as identified by the same value of ifIndex.
INT qosCQListNum	1.3.6.1.4.1.2011.5.25.32.2.11.1.2	INTEGER	read-write	The number of CQL applied to an interface identified by the value of qosCQIfIndex.
OCT qosCQIfName	1.3.6.1.4.1.2011.5.25.32.2.11.1.3	OCTET STRING	read-only	The description of the interface by the value of qosCQIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosUndoCQ	1.3.6.1.4.1.2011.5.25.32.2.11.1.4	INTEGER	read-write	0:Only for get. 1:Set the default queuing on interface: FIFO
qosCQRunInfoTable	1.3.6.1.4.1.2011.5.25.32.2.12		not-accessible	CQ(Custom Queuing) statistics table This table is about the running infomation of CQ applied on interface for congestion management.
qosCQRunInfoEntry	1.3.6.1.4.1.2011.5.25.32.2.12.1		not-accessible	CQ running infomation Command:display qos cq interface
INT qosCQRunInfoIfIndex	1.3.6.1.4.1.2011.5.25.32.2.12.1.1	INTEGER	read-only	The index of the table, which is the index of interface applying Custom Queuing strategy. The interface identified by the value of this index is the same interface as identified by the same value of ifIndex.
INT qosCQRunInfoQueNum	1.3.6.1.4.1.2011.5.25.32.2.12.1.2	INTEGER	read-only	The index of the table, which is the custom queue number
OCT qosCQRunInfoIfName	1.3.6.1.4.1.2011.5.25.32.2.12.1.3	OCTET STRING	read-only	The description of the interface by the value of qosCQRunInfoIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosCQRunInfoQuePkt	1.3.6.1.4.1.2011.5.25.32.2.12.1.4	INTEGER	read-only	The count of packets enqueued the spceified custom queue when congestion occoured in the interface.
CTR qosCQRunInfoQueDiscard	1.3.6.1.4.1.2011.5.25.32.2.12.1.5	Counter	read-only	The count of discarded packets which can't be enqueued the specified custom queue because the custom queue is full.
INT qosCQRunInfoMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.12.1.6	INTEGER	read-only	The maximum length of the specified queue. The default value of maximum queue length is 20.
qosWFQTable	1.3.6.1.4.1.2011.5.25.32.2.13		not-accessible	WFQ(Weighted Fair Queuing) table WFQ is a kind of queuing strategy applied on interface for congestion management. With WFQ, packets are classified by flow. For example, packets with the same source IP address, destination IP address, source TCP or UDP port, destination TCP or UDP port, and protocol belong to the same flow. When enabled for an interface, WFQ provides traffic priority management that automatically sorts among individual traffic flows without requiring first defined match rule lists. This table is about the WFQ configuration and running infomation.
qosWFQEntry	1.3.6.1.4.1.2011.5.25.32.2.13.1		not-accessible	WFQ configuration and running infomation Command:qos wfq [ queue-length max-queue-length [ queue-number total-queue-number ] ] display qos wfq interface
INT qosWFQIfIndex	1.3.6.1.4.1.2011.5.25.32.2.13.1.1	INTEGER	read-only	The index of the table, which is the index of interface applying Weighted Fair Queuing strategy. The interface identified by the value of this index is the same interface as identified by the same value of ifIndex.
OCT qosWFQIfName	1.3.6.1.4.1.2011.5.25.32.2.13.1.2	OCTET STRING	read-only	The description of the interface by the value of qosWFQIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosWFQMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.13.1.3	INTEGER	read-write	The maximum length of the queue.
INT qosWFQTotalQueNum	1.3.6.1.4.1.2011.5.25.32.2.13.1.4	INTEGER	read-write	The total number of queues. The default value is a256(256).
INT qosWFQCurQueLen	1.3.6.1.4.1.2011.5.25.32.2.13.1.5	INTEGER	read-only	The count of packets enqueued all the queues when congestion occoured in the interface.
CTR qosWFQTotalDiscard	1.3.6.1.4.1.2011.5.25.32.2.13.1.6	Counter	read-only	The count of discarded packets which can't be enqueued all the queues because the queue is full.
INT qosWFQActiveQueNum	1.3.6.1.4.1.2011.5.25.32.2.13.1.7	INTEGER	read-only	A queue becomes active when the queue is not empty. The count of current active queues when WFQ was enabled in the interface.
INT qosWFQMaxActiveQueNum	1.3.6.1.4.1.2011.5.25.32.2.13.1.8	INTEGER	read-only	The maximum count of active queues. It is the count of active queues that have occurred since WFQ was enabled in the interface.
INT qosUndoWFQ	1.3.6.1.4.1.2011.5.25.32.2.13.1.9	INTEGER	read-write	0:Only for get. 1:Set the default queuing on interface: FIFO
qosWREDTable	1.3.6.1.4.1.2011.5.25.32.2.14		not-accessible	WRED(Weighted Random Early Detect) table. WRED is a congestion avoidance mechanism that slows traffic by randomly dropping packets when congestion exists. WRED can be enabled only when Weighted Fair Queuing strategy was enable on the interface. This table is about the WRED configuration infomation.
qosWREDEntry	1.3.6.1.4.1.2011.5.25.32.2.14.1		not-accessible	WRED configuration infomation Command:qos wred qos wred weighting-constant exponent
INT qosWREDIfIndex	1.3.6.1.4.1.2011.5.25.32.2.14.1.1	INTEGER	read-only	The index of the table, which is the index of interface applying Weighted Random Early Detection. The interface identified by the value of this index is the same interface as identified by the same value of qosWFQIfIndex.
OCT qosWREDIfName	1.3.6.1.4.1.2011.5.25.32.2.14.1.2	OCTET STRING	read-only	The description of the interface by the value of qosWREDIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosWREDWeightConstant	1.3.6.1.4.1.2011.5.25.32.2.14.1.3	INTEGER	read-write	Weighted factor in formula for calculating the mean length of queue. From 1 to 16, the default value is 9
INT qosWREDEnable	1.3.6.1.4.1.2011.5.25.32.2.14.1.4	INTEGER	read-write	0: Disable WRED feature. Recover to tail-drop. 1: Enable WRED feature for the specified interface.
INT qosUndoWREDWeightConstant	1.3.6.1.4.1.2011.5.25.32.2.14.1.5	INTEGER	read-write	0:Only for get. 1:Recover the default value of weighted factor: 9
qosWREDPreTable	1.3.6.1.4.1.2011.5.25.32.2.15		not-accessible	WRED(Weighted Random Early Detect) precedence table. Weighted Random Early Detection(WRED) parameters for a particular IP Precedence can be configured. This table is about the WRED precedence configuration and running infomation.
qosWREDPreEntry	1.3.6.1.4.1.2011.5.25.32.2.15.1		not-accessible	WRED precedence configuration infomation Command:qos wred ip-precedence ip-precedence low-limit low-limit high-limit high-limit discard-probability discard-prob
INT qosWREDPreIfIndex	1.3.6.1.4.1.2011.5.25.32.2.15.1.1	INTEGER	read-only	The index of the table, which is the index of interface applying Weighted Random Early Detection. The interface identified by the value of this index is the same interface as identified by the same value of qosWREDIfIndex.
INT qosWREDPrecedence	1.3.6.1.4.1.2011.5.25.32.2.15.1.2	INTEGER	read-only	IP precedence, from 0 to 7
OCT qosWREDPreIfName	1.3.6.1.4.1.2011.5.25.32.2.15.1.3	OCTET STRING	read-only	The description of the interface by the value of qosWREDPreIfIndex. It's a textual string containing information about the interface type and the interface number.
INT qosWREDPreLowLimit	1.3.6.1.4.1.2011.5.25.32.2.15.1.4	INTEGER	read-write	Low Limit in number of packets. When the average queue length reaches the low limit, WRED randomly drops some packets with the specified IP Precedence. For all precedences, the default value is 10.
INT qosWREDPreHighLimit	1.3.6.1.4.1.2011.5.25.32.2.15.1.5	INTEGER	read-write	High limit in number of packets. When the average queue length exceeds the high limit, WRED drops all packets with the specified IP Precedence. For all precedences, the default value is 30.
INT qosWREDPreDiscardProbability	1.3.6.1.4.1.2011.5.25.32.2.15.1.6	INTEGER	read-write	Discard probability denominator. It is for the fraction of packets dropped when the average queue depth is at the high limit. For example, if the denominator is 128, 1 out of every 128 packets is dropped when the average queue is at the high limit. For all precedences, the default value is 10.
CTR qosWREDPreRandomDropNum	1.3.6.1.4.1.2011.5.25.32.2.15.1.7	Counter	read-only	Number of packets random-dropped for WRED
CTR qosWREDPreTailDropNum	1.3.6.1.4.1.2011.5.25.32.2.15.1.8	Counter	read-only	Number of packets tail-dropped for WRED
INT qosUndoWREDPre	1.3.6.1.4.1.2011.5.25.32.2.15.1.9	INTEGER	read-write	0:Only for get. 1:Recover the default value of low-limit,high-limit and discard-probability on relevant precedence.
qosCarlTable	1.3.6.1.4.1.2011.5.25.32.2.16		not-accessible	CARL(Committed Access Rate List) table
qosCarlEntry	1.3.6.1.4.1.2011.5.25.32.2.16.1		not-accessible	CARL configuration infomation Command:qos carl carl-index { precedence precedence-value \| mac mac-address }
INT qosCarlListNum	1.3.6.1.4.1.2011.5.25.32.2.16.1.1	INTEGER	read-only	The index of the CARL table, which is the CARL number
INT qosCarlParaType	1.3.6.1.4.1.2011.5.25.32.2.16.1.2	INTEGER	read-write	The matching type of the CARL. The types are as follows: Mac-address(1) -- matching the MAC address of the ethernet frame. prec-mask(2) -- matching the IP precedence of the IP packet. dscp-mask(3) -- matching the IP DSCP of the IP packet.
OCT qosCarlParaValue	1.3.6.1.4.1.2011.5.25.32.2.16.1.3	OCTET STRING	read-write	The parameter value of CARL. When CarlParaType=mac-address(1), this value is the MAC address with the format HHHHHH(hex). When CarlParaType=prec-mask(2), this value is the IP precedence mask. The value range is 0x00000000 ~ 0x11111111. The bit is corresponding to IP precedence. For example, in value 0x00100010, the bit 0 and bit 5 is set, that means IP precedenc 1 and 5.
INT qosUndoCarl	1.3.6.1.4.1.2011.5.25.32.2.16.1.4	INTEGER	read-write	0:Only for get. 1:Delete the specified CARL
qosCARTable	1.3.6.1.4.1.2011.5.25.32.2.17		not-accessible	CAR(Committed Access Rate) table
qosCAREntry	1.3.6.1.4.1.2011.5.25.32.2.17.1		not-accessible	CAR configuration and running infomation. Command:qos car { inbound \| outbound } { any \| acl acl-index \| carl carl-index } cir committed-rate cbs burst-size ebs excess-burst-size conform action exceed action display qos car interface
INT qosCARIfIndex	1.3.6.1.4.1.2011.5.25.32.2.17.1.1	INTEGER	read-only	One of the index of the CAR table. This is the index of the interface on which CAR policy applied.
OCT qosCARIfName	1.3.6.1.4.1.2011.5.25.32.2.17.1.2	OCTET STRING	read-only	The description of the interface.
INT qosCARPktDirection	1.3.6.1.4.1.2011.5.25.32.2.17.1.3	INTEGER	read-only	One of the index of the CAR table. This is the direction of traffic. There are two directions: inbound(1) and outbound(2)
INT qosCARType	1.3.6.1.4.1.2011.5.25.32.2.17.1.4	INTEGER	read-only	One of the index of the CAR table. This is the matching type for the traffic. The value acl(1) means that the traffic matching the configured ACL is applicable to the CAR policy. The value carl(2) means that the traffic matching the configured CARL is applicable to the CAR policy. The value all(3) means that all the traffic passing the interface is applicable to the CAR policy.
INT qosCARListNum	1.3.6.1.4.1.2011.5.25.32.2.17.1.5	INTEGER	read-only	One of the index of the CAR table. This is the ACL number or CARL number. When CARType=1,this number is ACL number, the range is 2000..3999; When CARType=2,this number is CARL number, the range is 1..199; When CARType=3,this parameter is invalid
INT qosCARCIR	1.3.6.1.4.1.2011.5.25.32.2.17.1.6	INTEGER	read-only	One of the index of the CAR table. The Committed Information Rate. Unit: bps. This is the target rate which the CAR policy limits.
INT qosCARBurstSize	1.3.6.1.4.1.2011.5.25.32.2.17.1.7	INTEGER	read-only	One of the index of the CAR table. Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the CAR policy.
INT qosCARExcessBurstSize	1.3.6.1.4.1.2011.5.25.32.2.17.1.8	INTEGER	read-only	One of the index of the CAR table. Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the CAR policy.
INT qosCARConformAction	1.3.6.1.4.1.2011.5.25.32.2.17.1.9	INTEGER	read-write	Action to be taken by the traffic, when the traffic conforms CIR. There are the following actions: Continue(1) -- Continue to be processed by the following CAR policy which applied on the interface. Discard(2) -- Discard the packet. remark-prec-continue(3) -- Remark the IP precedence of IP packet, and then continue to be processed by the following CAR policy. remark-prec-pass(4) -- Remark the IP precedence of IP packet, and then send the packet. pass(5) -- Send the packet directly. remark-mplsexp-continue(6) -- Remark the mpls exp field of mpls packet, and then continue to be processed by the following CAR policy. remark-mplsexp-pass(7) -- Remark the mpls exp field of mpls packet, and then send the packet.
INT qosCARExceedAction	1.3.6.1.4.1.2011.5.25.32.2.17.1.10	INTEGER	read-write	Action to be taken by the traffic, when the traffic is exceeds the CIR. There are the following actions: Continue(1) -- Continue to be processed by the following CAR policy which applied on the interface. Discard(2) -- Discard the packet. remark-prec-continue(3) -- Remark the IP precedence of IP packet, and then continue to be processed by the following CAR policy. remark-prec-pass(4) -- Remark the IP precedence of IP packet, and then send the packet. pass(5) -- Send the packet directly. remark-mplsexp-continue(6) -- Remark the mpls exp field of mpls packet, and then continue to be processed by the following CAR policy. remark-mplsexp-pass(7) -- Remark the mpls exp field of mpls packet, and then send the packet.
INT qosCARConformNewPrec	1.3.6.1.4.1.2011.5.25.32.2.17.1.11	INTEGER	read-write	Rewrite the precedence value on packets when traffic is within the CIR
INT qosCARExceedNewPrec	1.3.6.1.4.1.2011.5.25.32.2.17.1.12	INTEGER	read-write	Rewrite the precedence value on packets when traffic is out of CIR
CTR qosCARConformPkt	1.3.6.1.4.1.2011.5.25.32.2.17.1.13	Counter	read-only	The number of packets which conformed CIR.
CTR qosCARConformByte	1.3.6.1.4.1.2011.5.25.32.2.17.1.14	Counter	read-only	The bytes of packets which conformed CIR.
CTR qosCARExceedPkt	1.3.6.1.4.1.2011.5.25.32.2.17.1.15	Counter	read-only	The number of packets which exceeded CIR.
CTR qosCARExceedByte	1.3.6.1.4.1.2011.5.25.32.2.17.1.16	Counter	read-only	the bytes of packets which exceeded CIR.
INT qosUndoCAR	1.3.6.1.4.1.2011.5.25.32.2.17.1.17	INTEGER	read-write	0:Only for get. 1:Cancel the CAR policy applied on the interface.
qosGTSTable	1.3.6.1.4.1.2011.5.25.32.2.18		not-accessible	GTS(Generic Traffic Shaping) table
qosGTSEntry	1.3.6.1.4.1.2011.5.25.32.2.18.1		not-accessible	GTS configuration and running information Command:qos gts { any \| acl acl-index } cir committed-rate [ cbs burst-size [ ebs excess-burst-size [ queue-length queue-length ] ] ] display qos gts interface
INT qosGTSIfIndex	1.3.6.1.4.1.2011.5.25.32.2.18.1.1	INTEGER	read-only	One of the index of the GTS table. This is the index of the interface on which GTS policy applied.
OCT qosGTSIfName	1.3.6.1.4.1.2011.5.25.32.2.18.1.2	OCTET STRING	read-only	The description of the interface on which GTS policy applied.
INT qosGTSType	1.3.6.1.4.1.2011.5.25.32.2.18.1.3	INTEGER	read-only	One of the index of the GTS table. This is the matching type for the traffic. The value acl(1) means that the traffic matching the configured ACL is applicable to the GTS policy. The value all(2) means that all the traffic passing the interface is applicable to the GTS policy.
INT qosGTSACLNum	1.3.6.1.4.1.2011.5.25.32.2.18.1.4	INTEGER	read-only	One of the index of the GTS table. This is the ACL number for the shaping traffic to match.
INT qosGTSCIR	1.3.6.1.4.1.2011.5.25.32.2.18.1.5	INTEGER	read-write	The Committed Information Rate. This is the target sustained rate which the GTS policy will shape. Unit: bps.
INT qosGTSBurstSize	1.3.6.1.4.1.2011.5.25.32.2.18.1.6	INTEGER	read-write	Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the GTS policy.
INT qosGTSExcessBurstSize	1.3.6.1.4.1.2011.5.25.32.2.18.1.7	INTEGER	read-write	Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the GTS policy.
INT qosGTSMaxQueLen	1.3.6.1.4.1.2011.5.25.32.2.18.1.8	INTEGER	read-write	The maximum queue length for the GTS buffer.
INT qosGTSCurQueLen	1.3.6.1.4.1.2011.5.25.32.2.18.1.9	INTEGER	read-only	The current queue length for the GTS buffer, i.e. the number of packets queuing in the GTS buffer.
CTR qosGTSPassPkt	1.3.6.1.4.1.2011.5.25.32.2.18.1.10	Counter	read-only	The number of packets which passed by the GTS policy.
CTR qosGTSPassByte	1.3.6.1.4.1.2011.5.25.32.2.18.1.11	Counter	read-only	The bytes of packets which passed by the GTS policy.
CTR qosGTSDelayPkt	1.3.6.1.4.1.2011.5.25.32.2.18.1.12	Counter	read-only	The number of packets which delayed by the GTS policy.
CTR qosGTSDelayByte	1.3.6.1.4.1.2011.5.25.32.2.18.1.13	Counter	read-only	The bytes of packets which delayed by the GTS policy.
CTR qosGTSDiscardPkt	1.3.6.1.4.1.2011.5.25.32.2.18.1.14	Counter	read-only	The number of packets which discarded by the GTS policy.
CTR qosGTSDiscardByte	1.3.6.1.4.1.2011.5.25.32.2.18.1.15	Counter	read-only	The bytes of packets which discarded by the GTS policy.
INT qosUndoGTS	1.3.6.1.4.1.2011.5.25.32.2.18.1.16	INTEGER	read-write	0:Only for get. 1:Cancel the GTS policy applied on the interface.
qosLRTable	1.3.6.1.4.1.2011.5.25.32.2.19		not-accessible	LR(Line Rate) table.
qosLREntry	1.3.6.1.4.1.2011.5.25.32.2.19.1		not-accessible	LR configuration and running information. Command:qos lr display qos lr interface
INT qosLRIfIndex	1.3.6.1.4.1.2011.5.25.32.2.19.1.1	INTEGER	read-only	The index of the LR table, which is the index of the interface on which LR policy is applied.
OCT qosLRIfName	1.3.6.1.4.1.2011.5.25.32.2.19.1.2	OCTET STRING	read-only	The description of the interface on which LR policy is applied.
INT qosLRCIR	1.3.6.1.4.1.2011.5.25.32.2.19.1.3	INTEGER	read-write	The Committed Information Rate on the physical port. This is the target sustained rate which the LR policy limits. Unit: bps.
INT qosLRBurstSize	1.3.6.1.4.1.2011.5.25.32.2.19.1.4	INTEGER	read-write	Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the LR policy.
INT qosLRExcessBurstSize	1.3.6.1.4.1.2011.5.25.32.2.19.1.5	INTEGER	read-write	Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the LR policy.
CTR qosLRPassPkt	1.3.6.1.4.1.2011.5.25.32.2.19.1.6	Counter	read-only	The Number of packets which passed by LR policy.
CTR qosLRPassByte	1.3.6.1.4.1.2011.5.25.32.2.19.1.7	Counter	read-only	The bytes of packets which passed by LR policy.
CTR qosLRDelayPkt	1.3.6.1.4.1.2011.5.25.32.2.19.1.8	Counter	read-only	The number of packets which delayed by LR policy.
CTR qosLRDelayByte	1.3.6.1.4.1.2011.5.25.32.2.19.1.9	Counter	read-only	The bytes of packets which delayed by LR policy.
INT qosUndoLR	1.3.6.1.4.1.2011.5.25.32.2.19.1.10	INTEGER	read-write	0:Only for get. 1:Cancel the LR policy applied on the interface.
qosIfBandwidthTable	1.3.6.1.4.1.2011.5.25.32.2.20		not-accessible	A table of bandwidth parameter on interface.
qosIfBandwidthEntry	1.3.6.1.4.1.2011.5.25.32.2.20.1		not-accessible	Bandwidth parameter applied on Interface.
I32 qosIfBandwidthIfIndex	1.3.6.1.4.1.2011.5.25.32.2.20.1.1	Integer32	read-only	Interface Index, equal to ifIndex.
I32 qosIFBandwidthMaxBW	1.3.6.1.4.1.2011.5.25.32.2.20.1.2	Integer32	read-write	Max bandwidth Value (Unit: Kbps) applied on the interface.
I32 qosIFBandwidthMaxReservedBWPct	1.3.6.1.4.1.2011.5.25.32.2.20.1.3	Integer32	read-write	Max reserved bandwidth as percent of the interface bandwidth (Unit: percent).
I32 qosIFBandwidthMaxReservedBW	1.3.6.1.4.1.2011.5.25.32.2.20.1.4	Integer32	read-only	Max reserved bandwidth. Unit : Kbps
I32 qosIFBandwidthAvailable	1.3.6.1.4.1.2011.5.25.32.2.20.1.5	Integer32	read-only	Available bandwidth. Unit : Kbps
ROW qosIFBandwidthRowStatus	1.3.6.1.4.1.2011.5.25.32.2.20.1.6	RowStatus	read-create	RowStatus for qosIfBandwidthTable Table. Three actions are used: active, createAndGo, destroy
qosRTPIfApplyTable	1.3.6.1.4.1.2011.5.25.32.2.21		not-accessible	A table of QoS rtpq instance.
qosRTPIfApplyEntry	1.3.6.1.4.1.2011.5.25.32.2.21.1		not-accessible	Rtpq Configuration Information Entry.
I32 qosRTPIfApplyIfIndex	1.3.6.1.4.1.2011.5.25.32.2.21.1.1	Integer32	read-only	Interface Index, equal to ifIndex.
I32 qosRTPIfApplyStartPort	1.3.6.1.4.1.2011.5.25.32.2.21.1.2	Integer32	read-create	RTP-PORT(3): start-port: 2000~65535
I32 qosRTPIfApplyEndPort	1.3.6.1.4.1.2011.5.25.32.2.21.1.3	Integer32	read-create	RTP-PORT(3): end-port: 2000~65535
I32 qosRTPIfApplyBandWidth	1.3.6.1.4.1.2011.5.25.32.2.21.1.4	Integer32	read-create	Max bandwidth Value: Absolute value: 8..1000000. Unit: Kbps
I32 qosRTPIfApplyCbs	1.3.6.1.4.1.2011.5.25.32.2.21.1.5	Integer32	read-create	Committed Burst Size: 1500..2000000. Unit: bytes
ROW qosRTPIfApplyRowStatus	1.3.6.1.4.1.2011.5.25.32.2.21.1.6	RowStatus	read-create	RowStatus for RTPQoSIfApply Table. Three actions are used: active, createAndGo, destroy
qosRTPIfQueueRunInfoTable	1.3.6.1.4.1.2011.5.25.32.2.22		not-accessible	A table of Running statistics for RTP(Realtime Transport Protocol) Queue applied on the interface.
qosRTPIfQueueRunInfoEntry	1.3.6.1.4.1.2011.5.25.32.2.22.1		not-accessible	RTP(Realtime Transport Protocol) Queue statistics entry.
C32 qosRTPIfQueueSizeEx	1.3.6.1.4.1.2011.5.25.32.2.22.1.1	Counter32	read-only	Size of Rtpq Queue.
C32 qosRTPIfQueueMaxSize	1.3.6.1.4.1.2011.5.25.32.2.22.1.2	Counter32	read-only	Max packet number of RTP(Realtime Transport Protocol) Queue.
C32 qosRTPIfQueueOutputs	1.3.6.1.4.1.2011.5.25.32.2.22.1.3	Counter32	read-only	Output packet number of RTP(Realtime Transport Protocol) Queue.
C32 qosRTPIfQueueDiscards	1.3.6.1.4.1.2011.5.25.32.2.22.1.4	Counter32	read-only	Discarded packet number of RTP(Realtime Transport Protocol) Queue.

RFC description

Huawei interface Quality of Service MIB; manages QoS policies, traffic classes, and bandwidth control on Huawei network devices.

Start monitoring Huawei switch or router (interface-level QoS/congestion management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-IF-QOS-MIB