All MIBs › HUAWEI-CESOP-TDM-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2011-11-29
Category: Pseudowire, Vendor: Huawei
Description: Huawei CESoP TDM (Circuit Emulation Service over Packet - TDM) MIB providing objects for TDM over IP/MPLS circuit emulation management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-CESOP-TDM-MIB?
HUAWEI-CESOP-TDM-MIB is a Huawei Technologies proprietary MIB managing CESoP (Circuit Emulation Service over Packet) TDM circuit emulation. Its port-configuration table, keyed by port, records line coding, loopback, clock source, line status, RTP-switch flag, and frame mode, a performance table records errored-seconds/severely-errored-seconds and current unavailable-seconds, a board-configuration table records frame/slot/ZL index, board IP/MAC address, operational status, and recovery clock source, and a connect-configuration table records connection index. As a configuration/performance MIB it lets an administrator confirm TDM line clocking and watch errored-second counts on a Huawei CESoP gateway. It is deployed on Huawei Technologies CESoP TDM-over-packet gateways. Engineers can download the HUAWEI-CESOP-TDM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-CESOP-TDM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei Technologies CESoP TDM-over-packet gateways
Monitoring Examples
An administrator checks hwCesopPortPerfSESs and hwCesopPortClockSource to diagnose TDM circuit quality on a Huawei CESoP gateway.
What Can Be Monitored
- TDM line clocking and errored-second statistics
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-MIB
| huaweiMgmt | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwCesop | 1.3.6.1.4.1.2011.5.108 | The MIB is used for defining huawei's CESoP management MIB objects. | ||
| hwCesopMibObjects | 1.3.6.1.4.1.2011.5.108.1 | |||
| hwCesopPortCfgTable | 1.3.6.1.4.1.2011.5.108.1.1 | not-accessible | This table is used for setting CESoP port configuration. The index of this table is ifIndex. | |
| hwCesopPortCfgEntry | 1.3.6.1.4.1.2011.5.108.1.1.1 | not-accessible | This table is used for setting CESoP port configuration. The index of this entry is ifIndex. | |
| INT hwCesopPortLineCoding | 1.3.6.1.4.1.2011.5.108.1.1.1.1 | INTEGER | read-write | Line coding mode of CESoP port. Options: 1. e1HDB3(1) -the line coding mode of CESoP port is e1HDB3 2. e1AMI(2) -the line coding mode of CESoP port is e1AMI 3. t1B8SZ(3) -the line coding mode of CESoP port is t1B8SZ |
| INT hwCesopPortLoopback | 1.3.6.1.4.1.2011.5.108.1.1.1.2 | INTEGER | read-write | Loopback mode of CESoP port. Options: 1. e1NoLoop(1) -the loopback mode of CESoP port is e1NoLoop 2. e1LocalLoop(2) -the loopback mode of CESoP port is e1LocalLoop 3. e1RemoteLoop(3) -the loopback mode of CESoP port is e1RemoteLoop 4. e1PayloadLoop(7) -the loopback mode of CESoP port is e1PayloadLoop |
| INT hwCesopPortClockSource | 1.3.6.1.4.1.2011.5.108.1.1.1.3 | INTEGER | read-write | Clock source mode of CESoP port. Options: 1. e1Syetem(1) -system clock 2. e1Line(2) -line clock 3. e1Net(5) -net clock 4. e1Net1(6) -net clock 1 5. e1Net2(7) -net clock 2 6. e1Net3(8) -net clock 3 7. invalid(-1) -invalid value |
| INT hwCesopPortLineStatus | 1.3.6.1.4.1.2011.5.108.1.1.1.4 | INTEGER | read-only | Line status of CESoP port. Options: 1. dsx1Normal(1) -the line alarm status of CESoP port is normal 2. dsx1Fault(2) -the line alarm status of CESoP port is fault |
| INT hwCesopPortRTPSwitch | 1.3.6.1.4.1.2011.5.108.1.1.1.5 | INTEGER | read-write | Status of RTP switch. Options: 1. enable(1) -status of RTP switch to enable 2. disable(2) -status of RTP switch to disable 3. invalid(-1) -invalid value |
| INT hwCesopPortFrameMode | 1.3.6.1.4.1.2011.5.108.1.1.1.6 | INTEGER | read-write | Frame mode of CESoP port. Options: 1. t1SF(1) -the frame mode of CESoP port is SF 2. t1ESF(2) -the frame mode of CESoP port is ESF 3. invalid(-1) -invalid value |
| hwCesopPortPerfTable | 1.3.6.1.4.1.2011.5.108.1.2 | not-accessible | The performance statistics of the CESoP port. The index of this table is ifIndex. | |
| hwCesopPortPerfEntry | 1.3.6.1.4.1.2011.5.108.1.2.1 | not-accessible | The performance statistics of the CESoP port. The index of this entry is ifIndex. | |
| G32 hwCesopPortPerfESs | 1.3.6.1.4.1.2011.5.108.1.2.1.1 | Gauge32 | read-only | The number of error seconds. |
| G32 hwCesopPortPerfSESs | 1.3.6.1.4.1.2011.5.108.1.2.1.2 | Gauge32 | read-only | The number of serious error seconds. |
| G32 hwCesopPortCurrentUASs | 1.3.6.1.4.1.2011.5.108.1.2.1.3 | Gauge32 | read-only | The number of unavailable seconds. |
| hwCesopBoardCfgTable | 1.3.6.1.4.1.2011.5.108.1.3 | not-accessible | This table is used for setting CESoP board configuration. The indexes of this table are hwCesopFrameIndex, hwCesopSlotIndex and hwCesopZLIndex. | |
| hwCesopBoardCfgEntry | 1.3.6.1.4.1.2011.5.108.1.3.1 | not-accessible | This table is used for setting CESoP board configuration. The indexes of this entry are hwCesopFrameIndex, hwCesopSlotIndex and hwCesopZLIndex. | |
| I32 hwCesopFrameIndex | 1.3.6.1.4.1.2011.5.108.1.3.1.1 | Integer32 | not-accessible | Frame ID of the CESoP board. Only the value 0 is supported. |
| I32 hwCesopSlotIndex | 1.3.6.1.4.1.2011.5.108.1.3.1.2 | Integer32 | not-accessible | Slot ID of the CESoP board. |
| I32 hwCesopZLIndex | 1.3.6.1.4.1.2011.5.108.1.3.1.3 | Integer32 | not-accessible | ZL chip ID of the CESoP board. Only the value 0 is supported. |
| IP hwCesopBoardIpAddress | 1.3.6.1.4.1.2011.5.108.1.3.1.4 | IpAddress | read-write | Ip address of the CESoP board. |
| MAC hwCesopBoardMac | 1.3.6.1.4.1.2011.5.108.1.3.1.5 | MacAddress | read-only | Mac address of the CESoP board. |
| ROW hwCesopBoardOperStatus | 1.3.6.1.4.1.2011.5.108.1.3.1.6 | RowStatus | read-create | The present operation status of the row. Options: 1. active(1) -the status of the row is active 2. notInService(2) -the status of the row is notInService 3. notReady(3) -the status of the row is notReady 4. createAndGo(4) -the status of the row is createAndGo 5. createAndWait(5) -the status of the row is createAndWait 6. destroy(6) -the status of the row is destroy Active(1) and notInService(2) are states, these values may be read or written. NotReady(3) is a state, this value may be read, but not written. CreateAndGo(4), createAndWait(5) and destroy(6) are actions, these values may be written, but are never read. |
| I32 hwCesopBoardRecoveryClockSource | 1.3.6.1.4.1.2011.5.108.1.3.1.7 | Integer32 | read-write | Recovery clock source of the CESoP board. |
| hwCesopConnectCfgTable | 1.3.6.1.4.1.2011.5.108.1.4 | not-accessible | This table is used for setting CESoP link configuration. The index of this table is hwCesopConnectIndex. | |
| hwCesopConnectCfgEntry | 1.3.6.1.4.1.2011.5.108.1.4.1 | not-accessible | This table is used for setting CESoP link configuration. The index of this entry is hwCesopConnectIndex. | |
| I32 hwCesopConnectIndex | 1.3.6.1.4.1.2011.5.108.1.4.1.1 | Integer32 | not-accessible | CESoP link connection id. |
| I32 hwCesopConnectPortIndex | 1.3.6.1.4.1.2011.5.108.1.4.1.2 | Integer32 | read-create | The index of CESoP interface. |
| MAC hwCesopRemoteMac | 1.3.6.1.4.1.2011.5.108.1.4.1.3 | MacAddress | read-create | The remote MAC address. |
| IP hwCesopRemoteIp | 1.3.6.1.4.1.2011.5.108.1.4.1.4 | IpAddress | read-create | The remote CESoP port IP. |
| I32 hwCesopRemoteUDPPort | 1.3.6.1.4.1.2011.5.108.1.4.1.5 | Integer32 | read-create | The remote UDP label. |
| I32 hwCesopLocalUDPPort | 1.3.6.1.4.1.2011.5.108.1.4.1.6 | Integer32 | read-create | The local UDP label. |
| I32 hwCesopVlanId | 1.3.6.1.4.1.2011.5.108.1.4.1.7 | Integer32 | read-create | The VlanID. |
| ROW hwCesopConnectRowStatus | 1.3.6.1.4.1.2011.5.108.1.4.1.8 | RowStatus | read-create | The present operation status of the row. Options: 1. active(1) -the status of the row is active 2. notInService(2) -the status of the row is notInService 3. notReady(3) -the status of the row is notReady 4. createAndGo(4) -the status of the row is createAndGo 5. createAndWait(5) -the status of the row is createAndWait 6. destroy(6) -the status of the row is destroy Active(1) and notInService(2) are states, these values may be read or written. NotReady(3) is a state, this value may be read, but not written. CreateAndGo(4), createAndWait(5) and destroy(6) are actions, these values may be written, but are never read. |
| INT hwCesopRTPEnable | 1.3.6.1.4.1.2011.5.108.1.4.1.9 | INTEGER | read-create | The RTP switch of CESoP link. Options: 1. disable(1) -the RTP switch of CESoP link is disable 2. enable(2) -the RTP switch of CESoP link is enable |
| I32 hwCesopJitterBuffer | 1.3.6.1.4.1.2011.5.108.1.4.1.10 | Integer32 | read-create | The jitterBuffer size of CESoP link. |
| I32 hwCesopTDMPayloadSize | 1.3.6.1.4.1.2011.5.108.1.4.1.11 | Integer32 | read-create | The length of CESoP packets payload. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ... | | IPv4/IPv6 and UDP headers | | ... | +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | OPTIONAL | +-- --+ | | +-- --+ | Fixed RTP Header (see [RFC3550]) | +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | CESoPSN Control Word | +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | Packetized TDM data (Payload) | | ... | | ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+. The length of payload must be multiple of 32. |
| I32 hwCesopTDMLoadTime | 1.3.6.1.4.1.2011.5.108.1.4.1.12 | Integer32 | read-create | The TDM LoadTime of CESoP link, it must be a multiple of 125. If the entered value is not a multiple of 125, the system rounds it down to the nearest multiple of 125. The value of this field must be equal to or lower than the jitterBuffer size of the same CESoP link. The unit of this field is microsecond(us). |
| I32 hwCesopPriority | 1.3.6.1.4.1.2011.5.108.1.4.1.13 | Integer32 | read-create | The Priority of CESoP link |
| I32 hwCesopTDMVCLIndex | 1.3.6.1.4.1.2011.5.108.1.4.1.14 | Integer32 | read-create | TDM-VCL ID |
| I32 hwCesopRcvLSPLabel | 1.3.6.1.4.1.2011.5.108.1.4.1.15 | Integer32 | read-create | The LSP label of received packet. |
| I32 hwCesopRcvPWLabel | 1.3.6.1.4.1.2011.5.108.1.4.1.16 | Integer32 | read-create | The PW label of received packet. |
| I32 hwCesopTransLSPLabel | 1.3.6.1.4.1.2011.5.108.1.4.1.17 | Integer32 | read-create | The LSP label of transmitted packet. |
| I32 hwCesopTransPWLabel | 1.3.6.1.4.1.2011.5.108.1.4.1.18 | Integer32 | read-create | The PW label of transmitted packet. |
| IP hwCesopGateway | 1.3.6.1.4.1.2011.5.108.1.4.1.19 | IpAddress | read-create | The gateway IP address. |
| I32 hwCesopRcvSsrcId | 1.3.6.1.4.1.2011.5.108.1.4.1.20 | Integer32 | read-create | The recieve SSRC ID in RTP header. |
| I32 hwCesopTxSsrcId | 1.3.6.1.4.1.2011.5.108.1.4.1.21 | Integer32 | read-create | The transmit SSRC ID in RTP header. |
| I32 hwCesopPayloadType | 1.3.6.1.4.1.2011.5.108.1.4.1.22 | Integer32 | read-create | The payload type in RTP header. |
| I32 hwCesopSnStartNum | 1.3.6.1.4.1.2011.5.108.1.4.1.23 | Integer32 | read-create | The sn start number in RTP header. |
| INT hwCesopRemoteMacStatus | 1.3.6.1.4.1.2011.5.108.1.4.1.24 | INTEGER | read-only | The remote MAC address resolving status. Options: 1. static(1) -the remote MAC address is configured by user. 2. resolving(2) -the remote MAC address has not beed resolved. 3. resolved(3) -the remote MAC address has been resolved. 4. aged(4) -the remote MAC address has been aged. |
| hwCesopGlobalPerfTable | 1.3.6.1.4.1.2011.5.108.1.5 | not-accessible | The table of CESoP global performance statistics. The indexes of this table are hwCesopPerfFrameIndex and hwCesopPerfBoardIndex. | |
| hwCesopGlobalPerfEntry | 1.3.6.1.4.1.2011.5.108.1.5.1 | not-accessible | The table of CESoP global performance statistics. The indexes of this entry are hwCesopPerfFrameIndex and hwCesopPerfBoardIndex. | |
| I32 hwCesopPerfFrameIndex | 1.3.6.1.4.1.2011.5.108.1.5.1.1 | Integer32 | not-accessible | Frame ID of the statistics CESoP board. Only the value 0 is supported. |
| I32 hwCesopPerfBoardIndex | 1.3.6.1.4.1.2011.5.108.1.5.1.2 | Integer32 | not-accessible | Slot ID of the statistics CESoP board. |
| C64 hwCesopProtocolStackMatchCountH | 1.3.6.1.4.1.2011.5.108.1.5.1.3 | Counter64 | read-only | The high byte of the match protocol packets counter. |
| C64 hwCesopProtocolStackMatchCountL | 1.3.6.1.4.1.2011.5.108.1.5.1.4 | Counter64 | read-only | The low byte of the match protocol packets counter. |
| C32 hwCesopProtocolStackNoMatchCount | 1.3.6.1.4.1.2011.5.108.1.5.1.5 | Counter32 | read-only | The number of mismatch protocol packets. |
| C32 hwCesopClassifyNoMatchCount | 1.3.6.1.4.1.2011.5.108.1.5.1.6 | Counter32 | read-only | The number of mismatch classify rules packets. |
| C32 hwCesopVerificationFailureCount | 1.3.6.1.4.1.2011.5.108.1.5.1.7 | Counter32 | read-only | The number of verification failure packets. |
| C32 hwCesopIPv4ChecksumFailureCount | 1.3.6.1.4.1.2011.5.108.1.5.1.8 | Counter32 | read-only | The number of IP check sum failure packets. |
| C32 hwCesopUDPChecksumFailureCount | 1.3.6.1.4.1.2011.5.108.1.5.1.9 | Counter32 | read-only | The number of UDP check sum failure packets. |
| C64 hwCesopDropEvents | 1.3.6.1.4.1.2011.5.108.1.5.1.10 | Counter64 | read-only | The number of dropped events. |
| C64 hwCesopBytesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.11 | Counter64 | read-only | The number of received bytes. |
| C64 hwCesopFramesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.12 | Counter64 | read-only | The number of received frames. |
| C64 hwCesopBroadcastPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.13 | Counter64 | read-only | The number of received broadcast frames. |
| C64 hwCesopMulticastPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.14 | Counter64 | read-only | The number of received multicast frames. |
| C64 hwCesopCRCAlignmentErrorsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.15 | Counter64 | read-only | The number of received CRC errors packets. |
| C64 hwCesopUndersizedFramesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.16 | Counter64 | read-only | The number of received undersized frames. |
| C64 hwCesopOversizedPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.17 | Counter64 | read-only | The number of received oversized frames. |
| C64 hwCesopFragmentsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.18 | Counter64 | read-only | The number of received fragments. |
| C64 hwCesopJabberFramesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.19 | Counter64 | read-only | The number of received jabber frames. |
| C64 hwCesopConflictFramesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.20 | Counter64 | read-only | The number of received conflict frames. |
| C64 hwCesopPacketsOfLength64Received | 1.3.6.1.4.1.2011.5.108.1.5.1.21 | Counter64 | read-only | The number of received 64-byte frames. |
| C64 hwCesopPacketsOfLength65To127Received | 1.3.6.1.4.1.2011.5.108.1.5.1.22 | Counter64 | read-only | The number of received 65~127-byte frames. |
| C64 hwCesopPacketsOfLength128To255Received | 1.3.6.1.4.1.2011.5.108.1.5.1.23 | Counter64 | read-only | The number of received 128~255-byte frames. |
| C64 hwCesopPacketsOfLength256To511Received | 1.3.6.1.4.1.2011.5.108.1.5.1.24 | Counter64 | read-only | The number of received 256~511-byte frames. |
| C64 hwCesopPacketsOfLength512To1023Received | 1.3.6.1.4.1.2011.5.108.1.5.1.25 | Counter64 | read-only | The number of received 512~1023-byte frames. |
| C64 hwCesopPacketsOfLength1024To1518Received | 1.3.6.1.4.1.2011.5.108.1.5.1.26 | Counter64 | read-only | The number of received 1024~1518-byte frames. |
| C64 hwCesopOctetsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.27 | Counter64 | read-only | The number of received bytes. |
| C64 hwCesopUnicastPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.28 | Counter64 | read-only | The number of received unicast packets. |
| C64 hwCesopMulticastAndBroadcastPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.29 | Counter64 | read-only | The number of received multicast and broadcast packets. |
| C64 hwCesopDiscardedPacketsInBound | 1.3.6.1.4.1.2011.5.108.1.5.1.30 | Counter64 | read-only | The number of received discarded packets. |
| C64 hwCesopErroredPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.31 | Counter64 | read-only | The number of received errored packets. |
| C64 hwCesopUnknownProtocolPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.32 | Counter64 | read-only | The number of received unknown protocol packets. |
| C64 hwCesopOctetsTransmitted | 1.3.6.1.4.1.2011.5.108.1.5.1.33 | Counter64 | read-only | The number of transmitted bytes. |
| C64 hwCesopUnicastPacketsTransmitted | 1.3.6.1.4.1.2011.5.108.1.5.1.34 | Counter64 | read-only | The number of transmitted unicast packets. |
| C64 hwCesopMulticastAndBroadcastPacketsTransmitted | 1.3.6.1.4.1.2011.5.108.1.5.1.35 | Counter64 | read-only | The number of transmitted multicast and broadcast packets. |
| C32 hwCesopDiscardedPacketsOutbound | 1.3.6.1.4.1.2011.5.108.1.5.1.36 | Counter32 | read-only | The number of transmitted discarded packets. |
| C64 hwCesopErroredPacketsOutbound | 1.3.6.1.4.1.2011.5.108.1.5.1.37 | Counter64 | read-only | The number of transmitted errored packets. |
| C32 hwCesopLengthOfTheOutboundPacketQueue | 1.3.6.1.4.1.2011.5.108.1.5.1.38 | Counter32 | read-only | The length of transmitted packets queues. |
| C64 hwCesopDmacErrorsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.39 | Counter64 | read-only | The number of destination MAC error packets. |
| C64 hwCesopDipErrorsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.40 | Counter64 | read-only | The number of destination IP error packets. |
| C64 hwCesopDPortErrorsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.41 | Counter64 | read-only | The number of destination UDP port error packets. |
| C64 hwCesopFramesTransmitted | 1.3.6.1.4.1.2011.5.108.1.5.1.42 | Counter64 | read-only | The number of transmitted packets. |
| INT hwCesopGlobalPerfClearStat | 1.3.6.1.4.1.2011.5.108.1.5.1.43 | INTEGER | read-write | Clear statistics information of the CESoP board. Options: 1. clear(1) -clear statistics information of the CESoP board |
| hwCesopConnectPerfTable | 1.3.6.1.4.1.2011.5.108.1.6 | not-accessible | The table of CESoP connection performance statistics. The index of this table is hwCesopPerfConnectPwID. | |
| hwCesopConnectPerfEntry | 1.3.6.1.4.1.2011.5.108.1.6.1 | not-accessible | The table of CESoP connection performance statistics. The index of this entry is hwCesopPerfConnectPwID. | |
| I32 hwCesopPerfConnectPwID | 1.3.6.1.4.1.2011.5.108.1.6.1.1 | Integer32 | not-accessible | The CESoP link ID of performance statistics. |
| C32 hwCesopConnectEarlyPackets | 1.3.6.1.4.1.2011.5.108.1.6.1.2 | Counter32 | read-only | Early packets number of the CESoP link. |
| C32 hwCesopConnectLatePackets | 1.3.6.1.4.1.2011.5.108.1.6.1.3 | Counter32 | read-only | Late packets number of the CESoP link. |
| C32 hwCesopConnectUnderrunPackets | 1.3.6.1.4.1.2011.5.108.1.6.1.4 | Counter32 | read-only | Underrun packets number of the CESoP link. |
| C32 hwCesopConnectLostPackets | 1.3.6.1.4.1.2011.5.108.1.6.1.5 | Counter32 | read-only | Lost packets number of the CESoP link. |
| C32 hwCesopConnectCurrentQueueLength | 1.3.6.1.4.1.2011.5.108.1.6.1.6 | Counter32 | read-only | Current queue length of the CESoP link. |
| C32 hwCesopConnectAverageQueueLength | 1.3.6.1.4.1.2011.5.108.1.6.1.7 | Counter32 | read-only | Average queue length of the CESoP link. |
| C32 hwCesopConnectMaximumQueueLength | 1.3.6.1.4.1.2011.5.108.1.6.1.8 | Counter32 | read-only | Maximum queue length of the CESoP link. |
| C32 hwCesopConnectMinimumQueueLength | 1.3.6.1.4.1.2011.5.108.1.6.1.9 | Counter32 | read-only | Minimum queue length of the CESoP link. |
| C32 hwCesopConnectPacketReceiveCount | 1.3.6.1.4.1.2011.5.108.1.6.1.10 | Counter32 | read-only | Received packets number of the CESoP link. |
| C32 hwCesopConnectPacketTransmitCount | 1.3.6.1.4.1.2011.5.108.1.6.1.11 | Counter32 | read-only | Transmitted packets number of the CESoP link. |
| C32 hwCesopConnectByteTransmitCount | 1.3.6.1.4.1.2011.5.108.1.6.1.12 | Counter32 | read-only | Transmitted bytes number of the CESoP link. |
| C32 hwCesopConnectLBitCount | 1.3.6.1.4.1.2011.5.108.1.6.1.13 | Counter32 | read-only | L bit status changed number of the CESoP link. |
| C32 hwCesopConnectLBitSetTime | 1.3.6.1.4.1.2011.5.108.1.6.1.14 | Counter32 | read-only | L bit set number of the CESoP link. |
| C32 hwCesopConnectRBitCount | 1.3.6.1.4.1.2011.5.108.1.6.1.15 | Counter32 | read-only | R bit status changed number of the CESoP link. |
| C32 hwCesopConnectRBitSetTime | 1.3.6.1.4.1.2011.5.108.1.6.1.16 | Counter32 | read-only | L bit set number of the CESoP link. |
| C32 hwCesopConnectBufOverRunCount | 1.3.6.1.4.1.2011.5.108.1.6.1.17 | Counter32 | read-only | JitterBuffer overflow number of the CESoP link. |
| C32 hwCesopConnectBufOverRunSetTime | 1.3.6.1.4.1.2011.5.108.1.6.1.18 | Counter32 | read-only | JitterBuffer overflow reset number of the CESoP link. |
| C32 hwCesopConnectBufUnderRunCount | 1.3.6.1.4.1.2011.5.108.1.6.1.19 | Counter32 | read-only | JitterBuffer underflow number of the CESoP link. |
| C32 hwCesopConnectUnderRunSetTime | 1.3.6.1.4.1.2011.5.108.1.6.1.20 | Counter32 | read-only | JitterBuffer underflow reset number of the CESoP link. |
| INT hwCesopConnectPerfClearStat | 1.3.6.1.4.1.2011.5.108.1.6.1.21 | INTEGER | read-write | Clear statistics information of the CESoP link. Options: 1. clear(1) -clear statistics information of the CESoP link 2. invalid(-1) -invalid value |
| C32 hwCesopConnectChannelInPkts | 1.3.6.1.4.1.2011.5.108.1.6.1.22 | Counter32 | read-only | Statistics of the packets received on an E1 channel. |
| C32 hwCesopConnectChannelOutPkts | 1.3.6.1.4.1.2011.5.108.1.6.1.23 | Counter32 | read-only | Statistics of the packets transmitted from an E1 channel. |
| C32 hwCesopConnectChannelInSequenceErrors | 1.3.6.1.4.1.2011.5.108.1.6.1.24 | Counter32 | read-only | Statistics of the SN-error packets received on an E1 channel. |
| C32 hwCesopConnectChannelInVlanInvalid | 1.3.6.1.4.1.2011.5.108.1.6.1.25 | Counter32 | read-only | Statistics of the VLAN ID-error packets received on an E1 channel. |
| C32 hwCesopQueueUnderflow | 1.3.6.1.4.1.2011.5.108.1.6.1.26 | Counter32 | read-only | Statistics of the packets that are dropped due to queue overflow of an E1 channel. |
| C32 hwCesopQueueOverflow | 1.3.6.1.4.1.2011.5.108.1.6.1.27 | Counter32 | read-only | Statistics of the packets that are dropped due to queue underflow of an E1 channel. |
| C32 hwCesopConnectPacketReceiveErrorCount | 1.3.6.1.4.1.2011.5.108.1.6.1.28 | Counter32 | read-only | Statistics of the error packets received on an E1 channel. |
| C32 hwCesopConnectPacketReceiveSSrcErrorCount | 1.3.6.1.4.1.2011.5.108.1.6.1.29 | Counter32 | read-only | Statistics of the SSRC-error packets received on an E1 channel. |
RFC description
Huawei vendor-private MIB for TDM circuit management and monitoring in carrier networks.
Start monitoring Huawei CESoP TDM-over-packet gateway with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.