All MIBs › HUAWEI-ANCP-AN-EXT-MIB › hwAncpAnPortBegin
hwAncpAnPortBegin
Module: HUAWEI-ANCP-AN-EXT-MIB
OID (symbolic): HUAWEI-ANCP-AN-EXT-MIB::hwAncpAnPortBegin
OID (numeric): 1.3.6.1.4.1.2011.5.110.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object is used to configure the start port ID in the circuit ID information of the ANCP message. Range: 0-1 Default: 0
What is hwAncpAnPortBegin?
Configures the starting port ID (0 or 1) used when building the circuit-ID information carried in ANCP messages; defaults to 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.110.1.3 snmpwalk -v2c -c public <target> HUAWEI-ANCP-AN-EXT-MIB::hwAncpAnPortBegin
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.110.1.3.1 snmpget -v2c -c public <target> HUAWEI-ANCP-AN-EXT-MIB::hwAncpAnPortBegin.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.110.1.3.1 i <value>
Start monitoring Huawei DSL access node (DSLAM/MSAN, extended ANCP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-ANCP-AN-EXT-MIB::hwAncpAnPortBegin OID value, configure state conditions and alerts, and monitor any Huawei DSL access node (DSLAM/MSAN, extended ANCP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.110 | hwAncpAnExtMIB | HUAWEI-ANCP-AN-EXT-MIB |
| 1.3.6.1.4.1.2011.5.110.1 | hwAncpAnObjects | HUAWEI-ANCP-AN-EXT-MIB |
| 1.3.6.1.4.1.2011.5.110.1.3 | hwAncpAnPortBegin | HUAWEI-ANCP-AN-EXT-MIB |