HUAWEI-ADSL2-LINE-MIB :: adsl2SCStatusLinImg

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-ADSL2-LINE-MIB › adsl2SCStatusLinImg

adsl2SCStatusLinImg

Module: HUAWEI-ADSL2-LINE-MIB

OID (symbolic): HUAWEI-ADSL2-LINE-MIB::adsl2SCStatusLinImg

OID (numeric): 1.3.6.1.4.1.2011.6.111.1.2.2.1.9

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers. The number of utilized values on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Each array entry represents the imaginary component [referred here as b(i)] of Hlin(f = i*Df) value for a particular sub- carrier index i (0 <= i < NSC). Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)), where scale is Adsl2SubcarrierLinScale and a(i) [provided by the Adsl2SubcarrierLinReal object] and b(i) are in the range (-2^15+1) to (+2^15-1). A special value a(i)=b(i)= -2^15 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the attenuation is out of range to be represented. This parameter is only available after a loop diagnostic procedure. Each value in this array is 16 bits wide and is stored in big endian format.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.111.1.2.2.1.9
snmpwalk -v2c -c public <target> HUAWEI-ADSL2-LINE-MIB::adsl2SCStatusLinImg

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.111.1.2.2.1.9.1
snmpget -v2c -c public <target> HUAWEI-ADSL2-LINE-MIB::adsl2SCStatusLinImg.1

Start monitoring Huawei DSLAM/MSAN broadband access equipment (ADSL2/ADSL2+) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-ADSL2-LINE-MIB::adsl2SCStatusLinImg OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/MSAN broadband access equipment (ADSL2/ADSL2+) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.6huaweiUtilityHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.6.111adsl2MIBHUAWEI-ADSL2-LINE-MIB
1.3.6.1.4.1.2011.6.111.1adsl2HUAWEI-ADSL2-LINE-MIB
1.3.6.1.4.1.2011.6.111.1.2adsl2StatusHUAWEI-ADSL2-LINE-MIB
1.3.6.1.4.1.2011.6.111.1.2.2adsl2SCStatusTableHUAWEI-ADSL2-LINE-MIB
1.3.6.1.4.1.2011.6.111.1.2.2.1adsl2SCStatusEntryHUAWEI-ADSL2-LINE-MIB
1.3.6.1.4.1.2011.6.111.1.2.2.1.9adsl2SCStatusLinImgHUAWEI-ADSL2-LINE-MIB