HPNSASTORAGECAP-MIB

All MIBs › HPNSASTORAGECAP-MIB

Category: Domain: Server Hardware, Domain: Storage, Vendor: HP/HPE

Description: Monitors HP NetServer Agent storage capacity and logical drive configuration on HP ProLiant server platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPNSASTORAGECAP-MIB?

HPNSASTORAGECAP-MIB is a proprietary HP NetServer Agent module in the same HP ProLiant/NetServer hardware-management family, focused on storage capacity and logical drive configuration. It exposes data about physical/logical drive arrangement, total and available storage capacity, and RAID/logical-drive configuration on the server. Its monitoring role centers on disk and storage subsystem status, letting administrators track available versus used capacity, logical drive layout, and drive health as part of overall server hardware monitoring alongside memory and other subsystems covered by sibling HPNSA MIBs. It has an implicit dependency on the HP NetServer Agent's overall storage/array controller model shared across HPNSA modules. Typical deployment is on legacy HP NetServer or early ProLiant servers running the HP Insight/NetServer Agent, where HPNSASTORAGECAP-MIB SNMP monitoring supports storage capacity planning and disk-health monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPNSASTORAGECAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP NetServer
HP ProLiant server

Monitoring Examples

An administrator would poll a logical-drive table (modeled as a logicalDriveTable/logicalDriveEntry) to track configured RAID level, total capacity, and free space per logical volume, catching a volume approaching full capacity before it impacts applications. A drop in reported available capacity or a change in logical drive status would flag a failed physical disk in a RAID set. No sample objects were provided, so these object names are inferred from the module's stated purpose.

What Can Be Monitored

total storage capacity
available/free capacity
logical drive configuration
RAID level per volume
drive status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpnsaStorageCap	1.3.6.1.4.1.11.2.23.15
hpnsaSCMibRev	1.3.6.1.4.1.11.2.23.15.1
INT hpnsaSCMibRevMajor	1.3.6.1.4.1.11.2.23.15.1.1	INTEGER	read-only	The major revision level of the MIB.
INT hpnsaSCMibRevMinor	1.3.6.1.4.1.11.2.23.15.1.2	INTEGER	read-only	The minor revision level of the MIB.
hpnsaSCAgent	1.3.6.1.4.1.11.2.23.15.2
hpnsaSCAgentTable	1.3.6.1.4.1.11.2.23.15.2.1		not-accessible	A table of SNMP Agents that satisfy requests for this MIB.
hpnsaSCAgentEntry	1.3.6.1.4.1.11.2.23.15.2.1.1		not-accessible	A description of the agents that access Storage Capacity related information.
INT hpnsaSCAgentIndex	1.3.6.1.4.1.11.2.23.15.2.1.1.1	INTEGER	read-only	A unique index for this module description.
STR hpnsaSCAgentName	1.3.6.1.4.1.11.2.23.15.2.1.1.2	DisplayString	read-only	Name of the Agent/Agents satisfying SNMP requests for this MIB.
STR hpnsaSCAgentVersion	1.3.6.1.4.1.11.2.23.15.2.1.1.3	DisplayString	read-only	Version number of the Agent/Agents satisfying SNMP requests for this MIB.
OCT hpnsaSCAgentDate	1.3.6.1.4.1.11.2.23.15.2.1.1.4	OCTET STRING	read-only	The date on which this Agent was created. field octets contents range _________________________________________________ 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59
hpnsaSCDrv	1.3.6.1.4.1.11.2.23.15.3
INT hpnsaSCDrvNumOfDrives	1.3.6.1.4.1.11.2.23.15.3.1	INTEGER	read-only	This specifies the number of logical drives or volumes in this system.
hpnsaSCDrvTable	1.3.6.1.4.1.11.2.23.15.3.2		not-accessible	A table of storage capacity logical drive information entries.
hpnsaSCDrvEntry	1.3.6.1.4.1.11.2.23.15.3.2.1		not-accessible	Storage Capacity logical drive information.
INT hpnsaSCDrvIndex	1.3.6.1.4.1.11.2.23.15.3.2.1.1	INTEGER	read-only	A unique index for the logical drive.
STR hpnsaSCDrvName	1.3.6.1.4.1.11.2.23.15.3.2.1.2	DisplayString	read-only	A string indicating the name of the logical drive
INT hpnsaSCDrvTrapsEnabled	1.3.6.1.4.1.11.2.23.15.3.2.1.3	INTEGER	read-write	This parameter specifies whether storage capacity traps are generated (enabled 1) or not (disabled 0).
INT hpnsaSCDrvTrapsPollTime	1.3.6.1.4.1.11.2.23.15.3.2.1.4	INTEGER	read-write	This specifies the time in minutes in which a logical drive is polled to check if thresholds have been exceeded.
INT hpnsaSCDrvHistSampleTime	1.3.6.1.4.1.11.2.23.15.3.2.1.5	INTEGER	read-write	This specifies the time in minutes in which a logical drive is sampled to maintain historical data.
INT hpnsaSCDrvLoThreshold	1.3.6.1.4.1.11.2.23.15.3.2.1.6	INTEGER	read-write	This specifies the lower threshold (a percentage of the total capacity of the logical drive) which has to be exceeded to trigger off an informational trap
INT hpnsaSCDrvWarnThreshold	1.3.6.1.4.1.11.2.23.15.3.2.1.7	INTEGER	read-write	This specifies the threshold (a percentage of the total capacity of the logical drive) which has to be exceeded to trigger off a warning trap
INT hpnsaSCDrvCritThreshold	1.3.6.1.4.1.11.2.23.15.3.2.1.8	INTEGER	read-write	This specifies the threshold (a percentage of the total capacity of the logical drive) which has to be exceeded to trigger off a critical trap
INT hpnsaSCDrvTotalNumDirEntries	1.3.6.1.4.1.11.2.23.15.3.2.1.9	INTEGER	read-only	Total number of directory entries per logical drive. Only applicable to netware
INT hpnsaSCDrvTotalNumDirEntriesUsed	1.3.6.1.4.1.11.2.23.15.3.2.1.10	INTEGER	read-only	Number of directory entries used per logical drive. Only applicable to netware
INT hpnsaSCDrvCurrentTotal	1.3.6.1.4.1.11.2.23.15.3.2.1.11	INTEGER	read-only	The current total capacity of the logical drive in KB
INT hpnsaSCDrvCurrentAvailable	1.3.6.1.4.1.11.2.23.15.3.2.1.12	INTEGER	read-only	The current capacity available on the logical drive in KB
INT hpnsaSCDrvNumOfSamples	1.3.6.1.4.1.11.2.23.15.3.2.1.13	INTEGER	read-only	Total number historical samples for the logical drive.
INT hpnsaSCDrvClearHist	1.3.6.1.4.1.11.2.23.15.3.2.1.14	INTEGER	read-write	Setting this variable to the decimal value 1234 will trigger the agent to immediately delete the samples for the logical drive. Getting the value will always return a 0.
hpnsaSCHist	1.3.6.1.4.1.11.2.23.15.4
hpnsaSCHistTable	1.3.6.1.4.1.11.2.23.15.4.1		not-accessible	A table of storage capacity logical drive information entries.
hpnsaSCHistEntry	1.3.6.1.4.1.11.2.23.15.4.1.1		not-accessible	Storage Capacity logical drive historical information.
INT hpnsaSCHistDriveIndex	1.3.6.1.4.1.11.2.23.15.4.1.1.1	INTEGER	read-only	A unique index for the logical drive.
INT hpnsaSCHistIndex	1.3.6.1.4.1.11.2.23.15.4.1.1.2	INTEGER	read-only	A unique index for each historical drive sample.
OCT hpnsaSCHistSample	1.3.6.1.4.1.11.2.23.15.4.1.1.3	OCTET STRING	read-only	A block of data containing one historical drive sample. The structure of the bytes are: octets contents range __________________________________________ Local date and time on which sample was taken. 1 years since 1900 0..255 2 month 1..12 3 day 1..31 4 hour 0..23 5 minute 0..59 6 second 0..59 7-10 Total capacity in Kbytes. The 32-bit integer format is: Octet 7 (LSB) Octet 10 (MSB) 11-14 Available space in Kbytes. The 32-bit integer format is: Octet 11 (LSB) Octet 14 (MSB)

RFC description

Manages SAS storage subsystem capacity, device inventory, and fault status on HPE/Proliant storage appliances.

Start monitoring HP NetServer/ProLiant server (legacy storage capacity/logical drive) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPNSASTORAGECAP-MIB

What Is HPNSASTORAGECAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description