HPN-ICF-TE-TUNNEL-MIB :: hpnicfTeTunnelPsHoldOffTime

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › HPN-ICF-TE-TUNNEL-MIB › hpnicfTeTunnelPsHoldOffTime

hpnicfTeTunnelPsHoldOffTime

Module: HPN-ICF-TE-TUNNEL-MIB

OID (symbolic): HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsHoldOffTime

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.10

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This value is switchback delay time. When detected the work path fault, switch to protect path after this time.

What is hpnicfTeTunnelPsHoldOffTime?

This is the switchback delay, in units of 500ms, that the device waits after detecting a work-path fault before switching to the protect tunnel, defaulting to 0 (immediate switch). Admins raise this value to avoid triggering a protection switch on transient blips, coordinating with lower-layer protection mechanisms that might recover the fault first. A value of 4 introduces a 2-second hold-off before failing over to the protect path once a defect is detected on the work path.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.10
snmpwalk -v2c -c public <target> HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsHoldOffTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.10.1
snmpget -v2c -c public <target> HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsHoldOffTime.1

Start monitoring HP/H3C Comware routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsHoldOffTime OID value, configure state conditions and alerts, and monitor any HP/H3C Comware routers from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.115hpnicfTeTunnelHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.115.2hpnicfTeTunnelObjectsHPN-ICF-TE-TUNNEL-MIB
1.3.6.1.4.1.11.2.14.11.15.2.115.2.3hpnicfTeTunnelPsTableHPN-ICF-TE-TUNNEL-MIB
1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1hpnicfTeTunnelPsEntryHPN-ICF-TE-TUNNEL-MIB
1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.10hpnicfTeTunnelPsHoldOffTimeHPN-ICF-TE-TUNNEL-MIB