All MIBs › HPN-ICF-FDMI-MIB › hpnicfFdmiHbaPortSupportedSpeed
hpnicfFdmiHbaPortSupportedSpeed
Module: HPN-ICF-FDMI-MIB
OID (symbolic): HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortSupportedSpeed
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The supported speed registered for this port on this VSAN. It is a bitmask that indicates the Fibre Channel Transmission Speeds that are supported on this port.
What is hpnicfFdmiHbaPortSupportedSpeed?
This read-only bitmask reports which Fibre Channel transmission speeds this HBA port is capable of supporting. Comparing this against the switch port's own supported speeds helps an admin diagnose link negotiation problems or plan upgrades where a mismatch would cap throughput. If hpnicfFdmiHbaPortSupportedSpeed shows only lower-speed bits set on an HBA connected to a 16Gbps-capable switch port, the admin knows the HBA itself is the bottleneck limiting link speed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.3 snmpwalk -v2c -c public <target> HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortSupportedSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.3.1 snmpget -v2c -c public <target> HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortSupportedSpeed.1
Start monitoring HP/H3C Comware SAN/Fibre Channel switch (FDMI HBA registration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortSupportedSpeed OID value, configure state conditions and alerts, and monitor any HP/H3C Comware SAN/Fibre Channel switch (FDMI HBA registration) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127 | hpnicfSan | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7 | hpnicfFdmi | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1 | hpnicfFdmiObjects | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1 | hpnicfFdmiInfo | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2 | hpnicfFdmiHbaPortTable | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1 | hpnicfFdmiHbaPortEntry | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.3 | hpnicfFdmiHbaPortSupportedSpeed | HPN-ICF-FDMI-MIB |