All MIBs › HPN-ICF-FDMI-MIB › hpnicfFdmiHbaPortCurrentSpeed
hpnicfFdmiHbaPortCurrentSpeed
Module: HPN-ICF-FDMI-MIB
OID (symbolic): HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortCurrentSpeed
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The current speed registered for this port on this VSAN. It is a bitmask that indicates the Fibre Channel Transmission Speed at which this port is currently operating.
What is hpnicfFdmiHbaPortCurrentSpeed?
This read-only bitmask reports the single Fibre Channel transmission speed this HBA port is currently operating at, as registered via FDMI. It's the actual negotiated link speed rather than the port's full capability list, so admins check it to confirm a link is running at the expected rate rather than having auto-negotiated down. If hpnicfFdmiHbaPortCurrentSpeed shows the port running at 4Gbps despite both ends supporting 8Gbps, an admin would suspect a cabling or SFP issue causing the downshift.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.4 snmpwalk -v2c -c public <target> HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortCurrentSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.4.1 snmpget -v2c -c public <target> HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortCurrentSpeed.1
Start monitoring HP/H3C Comware SAN/Fibre Channel switch (FDMI HBA registration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortCurrentSpeed OID value, configure state conditions and alerts, and monitor any HP/H3C Comware SAN/Fibre Channel switch (FDMI HBA registration) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127 | hpnicfSan | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7 | hpnicfFdmi | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1 | hpnicfFdmiObjects | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1 | hpnicfFdmiInfo | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2 | hpnicfFdmiHbaPortTable | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1 | hpnicfFdmiHbaPortEntry | HPN-ICF-FDMI-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.4 | hpnicfFdmiHbaPortCurrentSpeed | HPN-ICF-FDMI-MIB |