All MIBs › HP-SN-MPLS-TE-MIB › mplsTunnelSetupPrio
mplsTunnelSetupPrio
Module: HP-SN-MPLS-TE-MIB
OID (symbolic): HP-SN-MPLS-TE-MIB::mplsTunnelSetupPrio
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: Indicates the setup priority of this tunnel.
What is mplsTunnelSetupPrio?
The setup priority (0-7, lower is higher priority) this tunnel uses when contending for bandwidth against other tunnels during signaling; an admin raises this priority on a critical tunnel so it can preempt lower-priority ones if resources are scarce.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15 | snMpls | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15 | mplsMIB | HP-SN-MPLS-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3 | mplsTeMIB | HP-SN-MPLS-TE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2 | mplsTeObjects | HP-SN-MPLS-TE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2 | mplsTunnelTable | HP-SN-MPLS-TE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1 | mplsTunnelEntry | HP-SN-MPLS-TE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.11 | mplsTunnelSetupPrio | HP-SN-MPLS-TE-MIB |