All MIBs › HP-SN-MPLS-TE-MIB › mplsTunnelHopListIndexNext
mplsTunnelHopListIndexNext
Module: HP-SN-MPLS-TE-MIB
OID (symbolic): HP-SN-MPLS-TE-MIB::mplsTunnelHopListIndexNext
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object contains an appropriate value to be used for mplsTunnelHopListIndex when creating entries in the mplsTunnelHopTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelHopTable is implemented as read-only. To obtain the value of mplsTunnelHopListIndex for a new entry in the mplsTunnelHopTable, the manager issues a management protocol retrieval operation to obtain the current value of mplsTunnelHopIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
What is mplsTunnelHopListIndexNext?
Hands out the next unused index for creating a new explicit-route entry in the tunnel hop table; a management station reads this before adding a new hop list, and a returned value of 0 means no unassigned index is available (e.g. the table is read-only).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.3 snmpwalk -v2c -c public <target> HP-SN-MPLS-TE-MIB::mplsTunnelHopListIndexNext
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.3.1 snmpget -v2c -c public <target> HP-SN-MPLS-TE-MIB::mplsTunnelHopListIndexNext.1
Start monitoring HP SN (Foundry-heritage) MPLS router/switch (Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-MPLS-TE-MIB::mplsTunnelHopListIndexNext OID value, configure state conditions and alerts, and monitor any HP SN (Foundry-heritage) MPLS router/switch (Traffic Engineering) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15 | snMpls | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15 | mplsMIB | HP-SN-MPLS-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3 | mplsTeMIB | HP-SN-MPLS-TE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2 | mplsTeObjects | HP-SN-MPLS-TE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.3 | mplsTunnelHopListIndexNext | HP-SN-MPLS-TE-MIB |