All MIBs › HP-ICF-SRCIP-MIB › hpicfSrcIpAddress
hpicfSrcIpAddress
Module: HP-ICF-SRCIP-MIB
OID (symbolic): HP-ICF-SRCIP-MIB::hpicfSrcIpAddress
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-write
Description: Administratively assigned IP address that should be used as source while sending application protocol packets. This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object.
What is hpicfSrcIpAddress?
This holds a specific, manually assigned IP address that the device should use as the source address for outgoing application-protocol packets when the configuredIpAddr policy is active. An admin sets this to a stable management-facing IP address so that syslog, SNMP traps, RADIUS, and similar traffic all appear to originate from one consistent, predictable source address regardless of which interface they actually leave through. Setting this to 10.1.1.1 would make the device stamp 10.1.1.1 as the source IP on its outgoing application traffic when the configuredIpAddr policy is selected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5 snmpwalk -v2c -c public <target> HP-ICF-SRCIP-MIB::hpicfSrcIpAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5.1 snmpget -v2c -c public <target> HP-ICF-SRCIP-MIB::hpicfSrcIpAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5.1 s <value>
Start monitoring HP ProCurve/Networking routing switch (management-traffic source IP policy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-SRCIP-MIB::hpicfSrcIpAddress OID value, configure state conditions and alerts, and monitor any HP ProCurve/Networking routing switch (management-traffic source IP policy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.13 | hpicfSrcIpMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.13.1 | hpicfSrcIpConfig | HP-ICF-SRCIP-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.13.1.1 | hpicfSrcIpAddrPolicyTable | HP-ICF-SRCIP-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1 | hpicfSrcIpAddrPolicyEntry | HP-ICF-SRCIP-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5 | hpicfSrcIpAddress | HP-ICF-SRCIP-MIB |