All MIBs › HP-ICF-SNMP-MIB › hpicfSnmpAuthNotifyEnable
hpicfSnmpAuthNotifyEnable
Module: HP-ICF-SNMP-MIB
OID (symbolic): HP-ICF-SNMP-MIB::hpicfSnmpAuthNotifyEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls whether hpicfSnmpAuthFail notifications will be generated. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentication, such as provided by SNMPv3.
NOTE that hpicfSnmpAuthFail and snmpEnableAuthenTraps (RFC-1157) are mutually exclusive. While they may both be disabled, only one may be enabled at any given time. Notifications enabled by hpicfSnmpAuthFail are more comprehensive and are therefore recommended.
What is hpicfSnmpAuthNotifyEnable?
This enables or disables the hpicfSnmpAuthFail notification, which the switch sends whenever an SNMP SET fails its authorization check on a security-related object. An admin disables it only if they specifically want the standard RFC-1157 snmpEnableAuthenTraps instead, since the two are mutually exclusive and only one can be active at a time. For example, leaving this at its default enabled(1) lets a security team receive traps whenever someone attempts an unauthorized SNMP write against the switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3 snmpwalk -v2c -c public <target> HP-ICF-SNMP-MIB::hpicfSnmpAuthNotifyEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3.1 snmpget -v2c -c public <target> HP-ICF-SNMP-MIB::hpicfSnmpAuthNotifyEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3.1 i <value>
Start monitoring HP ProCurve/Aruba switch (SNMP agent/community/trap config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-SNMP-MIB::hpicfSnmpAuthNotifyEnable OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (SNMP agent/community/trap config) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.38 | hpicfSnmpMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1 | hpicfSnmpObjects | HP-ICF-SNMP-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1 | hpicfSnmpConfig | HP-ICF-SNMP-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1 | hpicfSnmpGlobalCfg | HP-ICF-SNMP-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3 | hpicfSnmpAuthNotifyEnable | HP-ICF-SNMP-MIB |